Vecow MIG-2000 User manual

USER

Manual

USER

Manual

1.0.0 Edition 20210518

10th Gen Intel® Core™ i9/i7/i5/i3 Processor AI Computing System

NVIDIA® Tesla® /Quadro® /GeForce®/AMD Graphics

MIG-2000

ii

©Vecow MIG-2000 User Manual

Version Date Page Description Remark

1.00 2021/05/18 All Ocial Release

Record of Revision

iii

©Vecow MIG-2000 User Manual

This manual is released by Vecow Co., Ltd. for reference purpose only. All

product oerings and specications are subject to change without prior notice.

Vecow Co., Ltd. is under no legal commitment to the details of this document.

Vecow shall not be liable for direct, indirect, special, incidental, or consequential

damages arising out of the use of this document, the products, or any third party

infringements, which may result from such use.

Disclaimer

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if it is not installed and used

in accordance with the instruction manual, it may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

FCC

The products described in this manual comply with all applicable European

Union (CE) directives if it has a CE marking. For computer systems to

remain CE compliant, only CE-compliant parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

CE

Declaration of Conformity

This document contains proprietary information protected by copyright. No part

of this publication may be reproduced in any form or by any means, electric,

photocopying, recording or otherwise, without prior written authorization

by Vecow Co., Ltd. The rights of all the brand names, product names, and

trademarks belong to their respective owners.

Copyright and Trademarks

iv

©Vecow MIG-2000 User Manual

Model GigE

LAN

SSD

Tray

PCIe

x16

USB

3.0 HDMI COM SATA

III

System

Fan

MIG-2000 2114322 Y

Order Information

v

©Vecow MIG-2000 User Manual

Part Number Description

DDR4 32G Certied DDR4 32GB 2933MHz RAM

DDR4 16G Certied DDR4 16GB 2933MHz RAM

DDR4 8G Certied DDR4 8GB 2933MHz RAM

DDR4 4G Certied DDR4 4GB 2933MHz RAM

PWS-480W-WT 480W, 24V, 90V AC to 305V AC Power Supply, Wide-Temp, IP65

PWS-600W 600W, 24V, 90V AC to 305V AC Power Supply

PWS-600W-WT 600W, 28.8V, 90V to 305V AC Power Supply, Wide Temperature

-40°C to +70°C

Optional Accessories

vi

©Vecow MIG-2000 User Manual

Table of Contents

CHAPTER 1 GENERAL INTRODUCTION 1

1.1 Overview 1

1.2 Features 2

1.3 Specications of MIG-2000 3

1.4 Mechanical Dimension 5

CHAPTER 2 GETTING TO KNOW YOUR MIG-2000 6

2.1 Packing List 6

2.2 Front Panel I/O Functions 7

2.3 Main Board Expansion Connectors 13

2.4 Main Board Expansion Connectors 25

2.5 Main Board Jumper Settings 29

CHAPTER 3 SYSTEM SETUP 31

3.1 How to Open Your MIG-2000 31

3.2 Installing DDR4 SO-DIMM Modules 32

3.3 Installing M.2 (Key M) 33

3.4 Installing PCI/PCIe Card 34

3.5 Installing SSD/HDD 36

3.6 Mount Your MIG-2000 38

3.7 Installing Hold-down Kit 39

CHAPTER 4 BIOS SETUP 40

4.1 Entering BIOS Setup 40

4.2 Main Menu 41

4.3 System 42

4.4 Peripherals 43

vii

©Vecow MIG-2000 User Manual

4.5 Chipset 46

4.6 BIOS 48

4.7 Power 51

4.8 Save & Exit 52

APPENDIX A : Power Consumption 53

APPENDIX B : Supported Memory & Storage List 58

APPENDIX C : Graphics Benchmark 60

1

©Vecow MIG-2000 User Manual GENERAL INTRODUCTION

GENERAL INTRODUCTION

1.1 Overview

Vecow MIG-2000 AI Computing System is powered by 10th Gen Intel® Core™

i9/i7/i5/i3 processor that runs with Intel® H410 chipset and integrated NVIDIA®

Tesla®/Quadro®/GeForce®/AMD Radeon™ Graphics to deliver outstanding

computing and graphics performance.

Vecow MIG-2000 is equipped with up to 64GB of DDR4 2933 memory and

features Intel® UHD Graphics 630 to support up to 3 HDMI 4K displays and

provide 3D graphics quality to deliver breakthrough performance. This compact

AI Computing engine allows limitless scalability functionalities. It features 2 GigE

LAN, 1 SSD Tray, 4 USB, 2 COM, and 1 PCIe x16 expansion that supports up

to 750W power budget for advanced graphics computing performance.

Featuring 10-core 10th Gen Intel® i9/i7/i5/i3 processor (CML-S), industrial-grade

reliability with DC 9V to 55 V wide range power input, and smart power budget

up to 750W, Vecow MIG-2000 is your ideal solution for Autonomous Vehicles,

Medical Imaging, Smart Manufacturing, Deep Learning, Gaming, Trac Vision

and any AIoT/Industry 4.0 applications.

1

2

©Vecow MIG-2000 User Manual GENERAL INTRODUCTION

1.2 Features

• 10-core 10th Gen Intel® Core™ i9/i7/i5/i3 Processor (CML-S) running with Intel®

H410 chipset supports max 65W TDP CPU

• 0°C to 60°C Operating Temperature

• 2 DDR4 2933MHz Memory supports up to 64GB

• DC 9V to 55V wide range Power Input

• Expansion : 1 Mini PCIe, 1 PCIe x16, 1 M.2 Key E

• PCIe x16 expansion supports up to 750W Power Budget for independent 2-slot

graphics card

3

©Vecow MIG-2000 User Manual GENERAL INTRODUCTION

1.3 Specications of MIG-2000

System

Processor 10th Gen Intel® Core™ i9/i7/i5/i3 Processor (Comet Lake-S)

Chipset Intel® H410

BIOS AMI

SIO Nuvoton NCT6116D

Memory 2 DDR4 2933MHz SO-DIMM, up to 64GB

I/O Interface

Serial 2 COM RS-232/422/485

USB 4 USB 3.0

LED HDD, Power

Expansion

M.2 1 M.2 Key E Socket (2230, PCIe)

PCIe 1 PCIe x16 Slot

Mini PCIe 1 Full Size Mini PCIe

Graphics

Graphics Processor Intel® UHD Graphics 630

Interface 3 Digital Display : Up to 3840 x 2160 @60Hz

Storage

SATA 2 SATA III (6Gbps)

M.2 1 M.2 Key M Socket (2280, PCIe)

Audio

Audio Codec Realtek® ALC887, 5.1 Channel HD Audio

Audio Interface 1 Mic-in, 1 Line-out

Ethernet

LAN 1 Intel® I219V GigE LAN

LAN 2 Intel® I211 GigE LAN

Power

Power Input 9V to 55V, DC-in

Power Interface 2-pin Terminal Block : V+, V-

Others

HW Monitor Monitoring temperature, voltages. Auto throttling control

when CPU overheats.

4

©Vecow MIG-2000 User Manual GENERAL INTRODUCTION

Software Support

OS Windows 10, Linux

Mechanical

Dimension (W x D x H) 162.6mm x 203.6mm x 385.0mm (6.4" x 8.02" x 15.16")

Weight 5.3 kg (11.45 lb)

Mounting Wallmount by mounting bracket

Environment

Operating Temperature -0°C to 60°C (32°F to 147°F)

Storage Temperature -20°C to 85°C (-4°F to 185°F)

Humidity 5% to 95% humidity, non-condensing

Relative Humidity 95% at 60°C

Shock

• IEC 61373 : 2010

• Railway Applications : Rolling Stock Equipment, Shock

and Vibration Tests

EMC CE, FCC, EN50155, EN50121-3-2

5

©Vecow MIG-2000 User Manual GENERAL INTRODUCTION

1.4 Mechanical Dimension

162.6 (6.40)

203.6 (8.02)

385.0 (15.16)

212.6 (8.37)

192.6 (7.58)

162.6 (6.40)

385.0 (15.16)

259.5 (10.22)

Ø 5.0 (0.20)

R 2.5 (0.10)

R 4.5 (0.18)

Unit : mm (inch)

6

©Vecow MIG-2000 User Manual GETTING TO KNOW YOUR MIG-2000

2

GETTING TO KNOW YOUR MIG-2000

2.1 Packing List

Item Description Qty

1MIG-2000 1

Item Description Outlook Usage P/N Qty

1

PHILLPIS

M4x16L with

washer, Ni

Mount 53-24D6416-30B 4

2M3x4 Screw HDD 53-M006350-010 8

3

Phillips

F-Head M3*5

Z.B+Ny

Wall mount 53-M004950-310 6

4M3x4L, Ni M.2 Slot 53-2426204-80B 1

5

Terminal

block 2-pin

(10.16mm)

Switch 51-2701R02-R1Q 1

6MIG-2000 BP

to GPU Cable Cable 61-1400011-010 1

7

©Vecow MIG-2000 User Manual GETTING TO KNOW YOUR MIG-2000

2.2 Front Panel I/O Functions

In Vecow MIG-2000 series family, all I/O connectors are located on front panel.

Most of the general connections to computer device, such as USB, LAN Jack,

Audio, COM, HDMI, DC-IN and any additional Graphic Card, are placed on the

front panel.

8

©Vecow MIG-2000 User Manual GETTING TO KNOW YOUR MIG-2000

2.2.1 Reset Tact Switch

It is a hardware reset switch. Use this switch to reset the system without power o

the system. Press the Reset Switch for a few seconds, then reset will be enabled.

2.2.2 Power Button

The Power Button is a non-latched switch with single color LED indication. It

indicates power status S0.

To power on the system, press the power button and then the Green LED is

lightened.

To power o the system, you can either command shutdown by OS operation, or

just simply press the power button.

If system error, you can just press the power button for 4 seconds to shut down the

machine directly.

Please do note that a 4-second interval between each 2 power-on/ power-off

operation is necessary in normal working status. (For example, once turning o the

system, you have to wait for 4 seconds to initiate another power-on operation).

9

©Vecow MIG-2000 User Manual GETTING TO KNOW YOUR MIG-2000

2.2.3 PWR & HDD LED Indicator

HDD LED/Green : A Hard Disk LED. If the LED is on, it indicates that the

system's storage is functional. If it is o, it indicates that the system's storage is

not functional. If it is ashing, it indicates data access activities.

Power LED/Green : If the LED is solid green, it indicates that the system is powered on.

LED Color Indication System Status

Green HDD • On/Off : Storage status, function or not.

• Twinkling : Data transferring.

Green Power System power status (on/o)

2.2.4 HDMI Port

The HDMI port supports HDCP 2.3 and Dolby TrueHD and DTS HD Master Audio

formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You can

use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096 x 2160 @30 Hz, but the actual resolutions supported are

dependent on the monitor being used.

HDMI 2.0 Port

The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master Audio

formats. It also supports up to 192KHz/16bit 7.1-channel LPCM audio output.

You can use this port to connect your HDMI-supported monitor. The maximum

supported resolution is 4096 x 2160 @60 Hz, but the actual resolutions supported

are dependent on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback

device to HDMI. (The item name may dier depending on your operating system.)

10

©Vecow MIG-2000 User Manual GETTING TO KNOW YOUR MIG-2000

2.2.5 USB 3.0

These 9-pin USB ports are for USB 3.0/2.0 devices.

2.2.6 Ethernet Port

Connection/Speed LED

State Description

Orange 1 Gbps data rate

Green 100Mbps data rate

O 10Mbps data rate

Activity LED

State Description

Blinking Data transmission or

receiving is occurring

On No data transimission or

receiving is occurring

The Gigabit Ethernet LAN port provides Internet

connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs. Connection/

Speed LED

Activity LED

11

2.2.7 Audio Connector

Mic-in (Pink) : The Mic in jack.

Line-out (Green) : The line out jack. Use this audio jack for a headphone or

2-channel speaker.

2.2.8 Serial Port

Each COM header can provide one serial port via an optional COM port cable.

For purchasing the optional COM port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1NDCD- 2NDSR-

3NSIN 4NRTS-

5NSOUT 6 NCTS-

7 NDTR- 812V_5V

9 GND 10 NC

19

210

12

2.2.9 DC-in

This 2-pin DC-IN support 9V~55V DC power input.

13

2.3 Main Board Expansion Connectors

2.3.1 Inside View of MIG-2000 Main Board with Connector Location

ATX_12V

SATA3 0

F_USB2

F_USB1

COMA

COMB

GPIO

SATA3 1

COMB_PW

COMA_PW STB

BOOT

COMC

COMD

COMC_PW/

COMD_PW

MON_SW

LVDS

SMBUS

LCD_VCC

FPD

SATA_PWR

M2

CI

VOLUME_CONTROL

I2C

BAT

SPKR

F_AUDIO

CLR_CMOS

AT_ATX

SPEAKER

U_SIM

CPU_FAN

SYS_FAN

F_PANEL

Page is loading ...

Vecow MIG-2000 User manual

Vecow MIG-2000 User manual

Related papers

Other documents