ATEN 2X-EA08, 2X-EA07 Quick start guide

Hello! I've reviewed the provided installation guide for the ATEN Lok-u-Plug system, which includes the 2X-EA07 Cable Holder and 2X-EA08 Installation Tool. This system is designed to secure power cables on ATEN PDUs, preventing accidental disconnections. The guide provides clear, step-by-step instructions on how to install the cable holders using the included tool. I am ready to answer any questions you have about this installation process or the features of the device.
What is the purpose of the Lok-u-Plug system?

What components are included in the Lok-u-Plug system?

How do you install a power cable using the Lok-u-Plug system?

All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.

Please visit our website to find the most up-to-date version.

Lok-u-Plug Cable Holder 2X-EA07

Lok-u-Plug Installation Tool 2X-EA08

Installation Guide

05/2023 V2.0

Package Contents

2X-EA07

2X-EA08

Qty

Description

Qty

Description

Lok-u-Plug Cable Holder

Lok-u-Plug Installation Tool

installation instructions (printed on packaging)

The ATEN-patented Lok-u-Plug secures your power cables in place on an ATEN PDU device to prevent undesired

disconnection in events such as device repositioning and movement. For Lok-u-Plug securing, the Lok-u-Plug Cable

Holder (2X-EA07), must be used in conjunction with the Lok-u-Plug Installation Tool (2X-EA08).

Installation

To secure a power cable in place, using a Lok-u-Plug Cable Holder and Installation Tool, do the following:

1. Bend a Lok-u-Plug Cable Holder, and put the power cord to be secured through the middle of the Cable Holder as

shown.

2. Plug the power cord into the PDU’s power outlet,

and thread one end of the Lok-u-Plug Cable Holder

into the lower left hole next to the power outlet.

3. Using a Lok-u-Plug Installation Tool, lock the part of

the Cable Holder inserted into the hole by pushing it

towards the small part of the hole.

All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.

Please visit our website to find the most up-to-date version.

4. Push the Cable Holder as close to the PDU as possible. Then thread its other end to the upper right hole next to

the power outlet, and lock it in place using the Installation Tool by repeating step 3.

5. Slide the left and right rings of the Cable Holder towards the middle so that the power cord is completely fastened

to finish.

Suggested Installation Sequence

1. Plug in all of the Lok-u-Plug Cable Holders, for the power cords that you want to secure, but only secure them to

the lower left holes.

2. After securing to the lower left holes, then secure them to the upper right holes.