2. Hampton Bay
  3. CBW1803L-3/BRZ

Hampton Bay CBW1803L-3/BRZ Installation guide

  • Hello, I've reviewed the Assembly Instruction for the light fixture model 252-448. This document provides step-by-step instructions, from screwing in the nipple to connecting the wires and placing the post cap. I am ready to assist with any questions you have regarding the assembly process.
  • What should I do before starting the installation?
    How do I connect the wires?
    What should I do after completing the assembly?
○
A
ASSEMBLY INSTRUCTION
SKU#252-448
NOTE: Please consult a qualified electrician if you are not certain of the installation.
CAUTION: Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box.
1. Screw the nipple into the bushing of the fixture.
2. Install the bulbs (included).
3. Place glass shade, decorative pan, and top cover over the nipple onto the fixture and fasten
them with the finial.
4. Connect the wires white-to-white and black to black and cover the connections using wire
connectors provided. Tie the ground wires from outlet box and from the fixture together.
5. Place post cap on the post, and fasten it by tightening the thumb screws.
6. Turn on the power.
/