AT&T EL52201 User manual

Brand: AT&T

Model: EL52201

Category: Telephones

Type: User manual

This manual is also suitable for

User’s manual (Canada version)

EL52201/EL52251/

EL52301/EL52351/EL52401

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

Congratulations

on purchasing your new AT&T product. Before using this AT&T product, please

read Important safety information on pages 68-69 of this user’s manual.

Please thoroughly read the user’s manual for all the feature operations and

troubleshooting information you need to install and operate your new AT&T

product. You can also visit our website at www.telephones.att.com or

call 1 (866) 288-4268.

Model number: EL52201/EL52251 (two-handset system)

EL52301/EL52351 (three-handset system)

EL52401 (four-handset system)

Type: DECT 6.0 cordless telephone with answering system

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be found on

the bottom of the telephone base.

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing

aids and cochlear implants. The TIA-1083 Compliant Logo is

a trademark of the Telecommunications Industry Association.

Used under license.

The ENERGY STAR® program (www.energystar.gov) recognizes

and encourages the use of products that save energy and

help protect our environment. We are proud to mark this

product with the ENERGY STAR® label indicating it meets the

latest energy efficiency guidelines.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Parts checklist

Your telephone package contains the following items. Save your sales receipt

and original packaging in the event warranty service is necessary.

Wall mount bracket

Telephone base Power adapter for

telephone base

Cordless handset

(2 for EL52201/EL52251)

(3 for EL52301/EL52351)

(4 for EL52401)

Charger for cordless handset

with power adapter installed

(1 for EL52201/EL52251)

(2 for EL52301/EL52351)

(3 for EL52401)

Battery compartment cover

(2 for EL52201/EL52251)

(3 for EL52301/EL52351)

(4 for EL52401)

Telephone line cord

Quick start guide

Battery for cordless handset

(2 for EL52201/EL52251)

(3 for EL52301/EL52351)

(4 for EL52401)

Quick start guide (Canada version)

EL52201/EL52301/EL52401

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

User’s manual

EL52201/EL52251/

EL52301/EL52351/EL52401

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

Table of contents

Getting started

Quick reference guide ................................................ 2

Telephone base and charger installation .......... 4

Battery installation and charging .......................... 5

Battery installation ................................................ 5

Battery charging ..................................................... 6

Wall mount installation .............................................. 7

Tabletop to wall mount installation.............. 7

Wall mount to tabletop installation ............. 9

Telephone settings

Menu overview..............................................................10

Handset settings ..........................................................11

Ringer volume ........................................................11

Ringer tone..............................................................11

LCD language .........................................................11

Voicemail waiting (visual message

waiting) indicator .................................................12

Clear voicemail indication ...............................12

Key tone ....................................................................13

Set date/time .........................................................13

Home area code ...................................................14

Dial mode .................................................................14

Telephone base ringer volume .............................15

Answering system settings .....................................15

Telephone operation

Making, answering and ending calls..................16

Making a call ..........................................................16

Temporary ringer silencing ..............................16

Answering a call ...................................................17

Speakerphone ........................................................17

Ending a call ...........................................................17

Redial.................................................................................18

View numbers in the redial list .....................18

Call a number from the redial list ...............18

Copy a number from the redial list to

the directory ...........................................................19

Delete a number in the redial list ...............19

Options while on calls ..............................................20

Volume control ......................................................20

Mute ............................................................................20

Flash/call waiting ................................................20

Temporary tone dialing .....................................21

Chain dialing ...........................................................21

Join a call in progress .......................................22

Handset locator ............................................................23

Intercom ...........................................................................24

Make and answer an intercom call .............24

Answer an incoming call during an

intercom call ...........................................................24

Call transfer using intercom ..................................25

Directory

Directory overview ......................................................26

Shared directory ...................................................26

Directory memory capacity .............................26

Exiting the directory ...........................................26

Speed dial overview ............................................26

Create directory entries ...........................................27

Add a new contact ..............................................27

Add a predialed telephone number to

the directory ...........................................................28

Review the directory ..................................................29

Review directory entries ...................................29

Search by name ....................................................29

Dial, delete and edit a directory entry .............30

Dial a directory number ....................................30

Delete a directory entry ...................................30

Edit a directory entry .........................................30

Speed dial locations ..................................................31

Assign or reassign a directory entry to

a speed dial location ..........................................31

Clear a speed dial location .............................31

Dial a speed dial number .................................32

Caller ID

About caller ID .............................................................33

Information about caller ID with call

waiting .......................................................................33

About home area code .....................................33

Caller ID history ...........................................................34

How caller ID history (call log) works .......34

Memory match .......................................................34

Caller ID operation .....................................................35

Missed (new) calls indicator ...........................35

Reasons for missing caller ID

information ..............................................................35

View the caller ID history .................................36

View the dialing options ...................................36

Dial a caller ID history number .....................37

Delete caller ID history entries .....................37

Save a caller ID history entry in the

directory ....................................................................38

Answering system

Answering system settings .....................................39

Announcement ......................................................39

Answer on/off .......................................................40

Call screening ........................................................41

Number of rings ....................................................41

Remote access code...........................................42

Message alert tone..............................................42

Recording time ......................................................43

Voice language ......................................................43

Answering system overview ..................................44

Answering system and voicemail

indicators ..................................................................44

Using the answering system and

voicemail together...............................................44

Voice prompts ........................................................45

Message capacity .................................................45

Answering system new message

indication ..................................................................45

Call screening ........................................................45

Call intercept ..........................................................46

Temporarily turn off the message alert

tone .............................................................................46

Message playback .......................................................47

Listen to messages..............................................47

Options during playback ..................................48

Delete all old messages ...................................49

Recording and playing memos .............................50

Record a memo .....................................................50

Play back memos .................................................50

Message window displays .......................................51

Remote access ..............................................................52

Remotely access the answering system ...52

Appendix

Screen icons, indicator lights and alert

tones ..................................................................................54

Screen icons ...........................................................54

Handset indicator lights ....................................54

Telephone base indicator lights....................55

Handset alert tones ............................................55

Telephone base alert tones ............................55

Handset display screen messages ......................56

Troubleshooting ...........................................................58

Maintenance...................................................................67

Important safety information ................................68

Safety information ...............................................68

Precautions for users of implanted

cardiac pacemakers ............................................69

Pacemaker patients ............................................69

Especially about telephone answering

systems .....................................................................69

FCC Part 68 and ACTA..............................................70

FCC Part 15 ....................................................................71

Limited warranty ..........................................................72

Technical specifications ...........................................74

DECT 6.0 digital technology ...........................74

Telephone operating range .............................74

Index ..................................................................................75

You must install and charge

the battery before using the

cordless handset.

See pages 5 and 6 for

easy instructions.

Install the telephone base close to a telephone wall jack and an electrical

outlet not controlled by a wall switch. The telephone base can be placed on a

flat surface or vertically mounted on the wall (page 7). For optimum range and

better reception, place the telephone base in a central and open location.

If you subscribe to high-speed Internet service (DSL- digital subscriber

line) through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (page 4). The filter prevents

noise and caller ID problems caused by DSL interference. Please contact your

DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset

or telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing machine or

work bench.

•

Quick reference guide

Getting started

REDIAL/PAUSE

Press repeatedly to review

the last 10 numbers dialed

(page 18).

While entering numbers,

press and hold to insert a

dialing pause (pages 16 and 27).

PHONE/FLASH

Press to make or answer a

call (page 16).

During a call, press to answer

an incoming call when you

receive a call waiting alert

(page 20).

While reviewing a caller ID

history entry, press repeatedly

to add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory (page 36).

While entering names in

the directory, press to add a

space (page 27).

MUTE/DELETE

During a call, press to mute

the microphone (page 20).

While predialing, press to

erase digits (page 16).

While reviewing the redial

list, directory, speed dial list

or caller ID history, press to

delete an individual entry

(pages 19, 30, 31, and 37).

TONE

During a call, press to send

touch-tone signals (page 21).

/SPEAKER

Press to turn on the handset

speakerphone, press again to

resume normal handset use

(pages 17, 39, and 48).

DIR/VOLUME

Press to scroll up while in

menus (page 10).

Press to increase the

listening volume (pages 20

and 48) during a call.

Press to show directory

entries when the handset is

not in use (page 29).

While entering names or

numbers in the directory,

press to move the cursor to

the right (page 27).

CID/VOLUME

Press to scroll down while

in menus (page 10).

Press to decrease the

listening volume (pages 20

and 48) during a call.

Press to show the caller ID

history when the handset is

not in use (page 36).

While entering names or

numbers in the directory,

press to move the cursor to

the left (page 27).

MENU/SELECT

Press to display the menu

(page 10).

Once in the menu, press to

select an item or save an

entry or setting (page 10).

OFF/CANCEL

During a call, press to hang

up (page 17).

While using menus, press to

cancel an operation, back

up to the previous menu,

or exit the menu display

(page 10).

Press and hold while the

handset is not in use to

erase the missed call

indicator (page 35).

# (pound key)

When reviewing a caller

ID entry, press repeatedly

to view the dialing options

(page 36).

INT

Press to initiate an intercom

conversation or transfer a call

(pages 24 and 25).

Getting started

Quick reference guide

Using menus

Press MENU/SELECT to enter the

main menu.

Press CID or DIR to scroll

through menu items.

Press MENU/SELECT to select or

modify an item.

Press OFF/CANCEL to cancel

an operation, back up to the

previous menu, or exit the

menu display.

>PLAY MESSAGES

ANSWERING SYS

The > symbol indicates

the feature to select.

PLAY MESSAGES (page 47)

ANSWERING SYS (page 39)

DIRECTORY (page 26)

CALL LOG (page 33)

RINGERS (page 11)

SETTINGS (pages 11-14)

Main menu

/SKIP

Press to skip a message (page 48).

/ANS. ON/OFF

Press to turn the built-in answering system on

or off (page 40).

Message window

Displays the number of messages. During

playback, displays the messages number

currently playing (page 51).

/PLAY/STOP

Press to start or stop message playback

(page 47).

While call screening, press to temporarily turn

the call screening on or off (page 45).

X/DELETE

Press to delete the message currently playing

(page 48).

Press twice to delete all old messages when

the telephone is not in use (page 49).

/REPEAT

After the answering system plays the day

and time the current message was received,

press to repeat the message currently playing

(page 48).

While the answering system is playing the day

and time the current message was received,

press to listen to the previous message

(page 48).

/HANDSET LOCATOR

Press to make all handsets beep so you can

locate them (page 23).

/ /-VOLUME+

When the telephone is not in use, press

to adjust the telephone base ringer

volume (page 15).

During call screening or message

playback, press to adjust the listening

volume (pages 46 and 48).

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below. If you subscribe

to high-speed Internet service (DSL - digital subscriber line) through your

telephone line, you must install a DSL filter between the telephone line cord

and the telephone wall jack. The filter prevents noise and caller ID problems

caused by DSL interference. Please contact your DSL service provider for

more information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount your

telephone on a wall, refer to Wall mount installation on pages 7-9 for details.

IMPORTANT INFORMATION:

Use only the power adapters provided with this

product. To obtain a replacement, visit our website

at www.telephones.att.com or call

1 (866) 288-4268.

Plug the large end

of the charger’s

power adapter into

an electrical outlet

not controlled by a

wall switch.

Ensure the small

end of the charger’s

power adapter is

plugged into the

power jack on

the bottom of the

charger.

Telephone line cord

Electrical outlet not

controlled by a wall

switch

Plug the large end

of the base power

adapter into an

electrical outlet not

controlled by a wall

switch.

Telephone wall jack

Plug one end of the

telephone line cord into

a telephone wall jack.

A DSL filter (not included)

is required if you have DSL

high-speed Internet service.

Plug the small end

of the base power

adapter into the power

jack on the bottom of

the telephone base.

Route the cords

through the slots.

Plug the other end of

the telephone line cord

into the TEL. LINE jack

on the bottom of the

telephone base.

Getting started

Battery installation and charging

Battery installation

Install the battery as shown below.

IMPORTANT INFORMATION:

Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,

visit our website at www.telephones.att.com or call 1 (866) 288-4268.

Battery

Pack

BT1

62342/BT26234

2.4V 300mA

h Ni-MH

WAR

NING:DO NOT

BURN OR

PUNCTURE B

ATTERIES

MADE IN

CHINA

CR0920

Plug the battery

connector securely

into the socket inside

the handset battery

compartment, matching

the color-coded label.

1. Insert the supplied

battery with the label

THIS SIDE UP facing

up as indicated.

2. Align the cover flat

against the battery

compartment, then

slide it upwards until

it clicks into place.

Charge the handset by placing it

face up in the telephone base or

charger. The CHARGE light is on

when charging.

To replace the battery, press

the tab and slide the battery

compartment cover downwards.

Lift out the old battery and

disconnect it from the handset.

Follow the instructions above to

install and charge the new battery.

CHARGE light

Getting started

Battery installation and charging

Battery charging

Once you have installed the battery, the screen indicates

the battery status (see the table below). If necessary,

place the handset in the telephone base or charger to

charge the battery. For best performance, keep the handset

in the telephone base or charger when not in use. The

battery is fully charged after 10 hours of continuous

charging. See Technical specifications on page 74 for battery

operating times.

If the screen is blank, you need to charge the handset without interruption

for at least 30 minutes to give the handset enough charge to use the

telephone for a short time. The screen shows LOW BATTERY until you

have charged the battery without interruption for at least 30 minutes. The

following table summarizes the battery charge indicators and actions to take.

NOTES:

If you are on a call in low battery mode, you hear four short beeps every 50 seconds.

If no battery is installed in the handset when you place it in the telephone base or charger,

the CHARGE light does not turn on and the screen shows NO BATTERY. Follow the

instructions in Battery installation on page 5 to install the battery.

•

10:30

11/20

HANDSET 1

16 MISSED CALLS

Battery status icon

After you install your telephone or power returns following

a power outage, the handset will prompt you to set the

date and time (see page 13). To skip setting the date and

time, press OFF/CANCEL.

SET DATE

--/--/--

Battery indicators Battery status Action

The screen is blank or shows

PLACE IN CHARGER.

Battery has no or very little

charge. The handset cannot

be used.

Charge without interruption (at

least 30 minutes).

The screen shows

LOW BATTERY

and flashes.

Battery has enough charge

to be used for a short time.

Charge without interruption (at

least 30 minutes).

The screen shows HANDSET X

and the battery icon shows

, or .

Battery is charged. To keep the battery charged,

place it in the telephone base

or charger when not in use.

Getting started

Wall mount installation

The telephone base comes ready for tabletop use. If you want to mount your

telephone on a wall, use the provided wall mount bracket to connect with

a standard dual-stud telephone wall mounting plate. If you do not have this

mounting plate, you can purchase one from many hardware or consumer

electronics retailers. Professional assistance may be required to install the

mounting plate.

Tabletop to wall mount installation

To change the telephone base from tabletop installation to wall mount

installation, make sure you first unplug the power adapter from the electrical

outlet and unplug the telephone line cord from the telephone wall jack.

Plug one end of the telephone line cord into the TEL. LINE jack on the

bottom of the telephone base. Plug the small end of the base power

adapter into the power jack on the bottom of the telephone wall jack.

Position the telephone base as shown below. Insert the extended tabs

of the wall mount bracket (marked B) into the slots on the back of the

telephone base. Push the telephone base down until it clicks securely

in place.

Route the telephone line cord through the wall mount bracket hole. Route

the power cord out of the bottom of the telephone.

Slots for wall mount

bracket installation

A DSL filter (not included) is

required if you have DSL

high-speed Internet service.

Wall mount

bracket

Getting started

Wall mount installation

Plug the other end of the telephone line cord into the telephone wall jack.

Plug the large end of the base power adapter into an electrical outlet not

controlled by a wall switch.

A DSL filter (not included) is

required if you have DSL

high-speed Internet service.

Align the holes on the wall mount bracket with the mounting studs of the

wall mounting plate and slide the bracket down until it locks securely into

place. If necessary, bundle the telephone line cord and power adapter cord

neatly with twist ties.

DSL filter

Getting started

Wall mount installation

Wall mount to tabletop installation

To change the telephone base from wall mount installation to tabletop

installation, follow the steps below.

Unplug the large end of the base power adapter from the electrical outlet.

If the telephone line cord and power adapter cord are bundled, untie

them first. Slide the wall mount bracket up and remove it from the wall

mounting plate. Unplug the end of the telephone line cord from the

telephone wall jack.

Lift the telephone base up to detach it from the wall mount bracket.3.

Refer to Telephone base and charger installation on page 4 to install the

telephone base.

Menu overview

Use the menu to change the telephone settings.

Press MENU/SELECT in idle mode (when handset is not in use) to enter the

main menu.

Press CID or DIR until > is next to the feature you

want to select.

Press MENU/SELECT to select or save the indicated item.

-OR-

Press OFF/CANCEL to cancel an operation, back

up to the previous menu or exit the menu display.

-OR-

Press and hold OFF/CANCEL to cancel an operation

and return to idle mode.

-OR-

If no key is pressed within 30 seconds, the handset

automatically cancels an operation and returns to

idle mode.

NOTE: The menu items PLAY MESSAGE, ANSWERING SYS,

DIRECTORY, CALL LOG, CLR VOICEMAIL, SET DATE/TIME, HOME AREA CODE and DIAL MODE

are shared by all handsets. Any changes made to these menu items on any one handset apply to

all handsets.

Menu structure

10:30

11/20

HANDSET 1

16 MISSED CALLS

The handset is in

idle mode

>PLAY MESSAGES

ANSWERING SYS

The > symbol indicates

the feature to select.

Telephone settings

PLAY MESSAGES

ANSWERING SYS

DIRECTORY

CALL LOG

RINGERS

SETTINGS

ANNOUNCEMENT

DELETE ALL OLD

RECORD MEMO

ANSWER ON/OFF

ANS SYS SETUP

RINGER VOLUME

RINGER TONE

LCD LANGUAGE

CLR VOICEMAIL

KEY TONE

SET DATE/TIME

HOME AREA CODE

DIAL MODE

CALL SCREENING

# OF RINGS

REMOTE CODE

MSG ALERT TONE

RECORDING TIME

VOICE LANGUAGE

Telephone settings

Handset settings

Ringer volume

You can set the handset ringer volume level (1-6), or turn the ringer off.

When the ringer is off, appears on the handset screen.

Press MENU/SELECT in idle mode to enter the main menu.

Press CID or DIR to scroll to >RINGERS. Press

MENU/SELECT.

Press MENU/SELECT to select >RINGER VOLUME.

Press CID or DIR to sample each volume level.

Press MENU/SELECT to save your preference.

NOTES:

Changing the handset ringer volume does not affect the base ringer volume. For more

information on the base ringer volume, see Telephone base ringer volume on page 15.

The handset ringer volume also determines the ringer volume of intercom calls and

paging tones.

If the handset ringer volume is off, that handset ringer is silenced for all incoming calls.

However, that handset still plays the paging tone when responding to the handset locator

feature (see Handset locator on page 23).

While the telephone is ringing, press OFF/CANCEL or MUTE/DELETE to silence the ringer

temporarily on that handset only (see Temporary ringer silencing on page 16).

Ringer tone

You can choose one of 10 ringer tones for the handset.

Follow Steps 1 and 2 in Ringer volume above.

Press CID or DIR to scroll to >RINGER TONE, then press

MENU/SELECT.

Press CID or DIR to sample each tone.

Press MENU/SELECT to save your preference.

NOTE: If you turn off the handset ringer volume, you will not hear ringer tone samples.

LCD language

You can select the language used for all screen displays.

Press MENU/SELECT in the idle mode to enter the

main menu.

Press CID or DIR to scroll to >SETTINGS. Press

MENU/SELECT.

Press MENU/SELECT to select >LCD LANGUAGE.

Press CID or DIR to select ENGLISH, FRANÇAIS or ESPAÑOL.

Press MENU/SELECT to save your preference.

•

RINGER TONE

LCD LANGUAGE

>ENGLISH

RINGER VOLUME

Telephone settings

Handset settings

Voicemail waiting (visual message waiting) indicator

If you subscribe to a voicemail service offered by your

telephone service provider, this feature provides a visual

indication when you have new voicemail messages. NEW

VOICEMAIL and appear on the handset screen.

NOTES:

Your telephone service provider might alert you to new voicemail messages with a stutter

(broken) dial tone. Contact your telephone service provider for more details.

This feature does not indicate new messages recorded on your telephone’s built-in

answering system.

For more information about the differences between your answering system and voicemail,

see Answering system and voicemail indicators on page 44.

Clear voicemail indication

Use this feature when the telephone indicates there is a new voicemail message

but there is none. This may occur, for example, when you have accessed your

voicemail while away from home. This feature only turns off the displayed NEW

VOICEMAIL message and icon; it does not delete your voicemail messages.

As long as you have new voicemail messages, your telephone service provider

continues to send the signal to turn on the indicators.

To manually turn off the new voicemail indicators:

Press MENU/SELECT when in idle mode to enter the main menu.

Press CID or DIR to scroll to >SETTINGS, then press MENU/SELECT.

Press CID or DIR to scroll to >CLR VOICEMAIL,

then press MENU/SELECT. The screen shows

TURN OFF INDICATOR?

Press MENU/SELECT to turn the voicemail indication off.

A confirmation tone sounds.

-OR-

Press OFF/CANCEL to cancel the procedure.

NOTE: For more information about using your voicemail service, contact your telephone

service provider for assistance.

•

HANDSET 1

NEW VOICEMAIL

10:30

11/20

TURN OFF

INDICATOR?

Telephone settings

Handset settings

Key tone

The handset is programmed to beep with each key press. You can turn the

key tone off, so there are no beeps when you press keys.

Press MENU/SELECT in idle mode to enter the main menu.

Press CID or DIR to scroll to >SETTINGS, then press MENU/SELECT.

Press CID or DIR to scroll to >KEY TONE, then press

MENU/SELECT.

Press CID or DIR to select >ON or >OFF.

Press MENU/SELECT to save your preference.

Set

date/time

The answering system announces the day of the week and time of each

message received prior to playing it. If you subscribe to caller ID service,

the day, month and time are set automatically with each incoming call (see

About caller ID on page 33). However, the year must be set so that the day

of the week can be calculated from the caller ID information.

Follow the steps below to set the month, date, year and time.

Press MENU/SELECT in idle mode to enter the main menu.

Press CID or DIR to scroll to >SETTINGS, then press MENU/SELECT.

Press CID or DIR to scroll to >SET DATE/TIME, and

then press MENU/SELECT.

Press CID or DIR to select the month, then press

MENU/SELECT, or enter the two-digit number (01-12)

using the dialing keys (0-9).

Press CID or DIR to select the day, then press MENU/SELECT, or enter

the two-digit number (01-31) using the dialing keys (0-9).

Press CID or DIR to select the year, or enter the two-digit number

(00-99) using the dialing keys (0-9), then press MENU/SELECT.

Press CID or DIR to select the hour, then press

MENU/SELECT, or enter the two-digit number (01-12)

using the dialing keys (0-9).

Press CID or DIR to select the minute, or enter the

two-digit number (00-59) using the dialing keys (0-9),

then press MENU/SELECT.

Press DIR or 2 to choose AM, or press CID or 7 to choose PM. Press

MENU/SELECT to save. A confirmation tone sounds.

NOTE: If the date and time is not set when the message is recorded, the system announces

“Time and date not set” before it plays the message.

KEY TONE

>ON

SET DATE

11/20/10

SET TIME

10:30 PM

Telephone settings

Handset settings

Home area code

If you dial seven digits to make a local call (no area code required), enter

your area code into the telephone as home area code. When you receive a

call from within your home area code, the caller ID history only displays the

seven digits of the telephone number.

This feature makes it easy for you to make a call from the caller ID history.

If you dial 10 digits to make a local call, do not use this home area code

feature. If you do, you will not be able to place calls from your caller ID

history because they have only seven digits.

Press MENU/SELECT in idle mode to enter the main menu.

Press CID or DIR to scroll to >SETTINGS, then press MENU/SELECT.

Press CID or DIR to scroll to >HOME AREA CODE, then

press MENU/SELECT.

Use the dialing keys to enter your three-digit area code.

Press MUTE/DELETE to erase digits while entering.

Press MENU/SELECT to save the setting.

NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make

a local call (area code + telephone number), you need to delete your home area code. While the

home area code is displaying in Step 4 above, press and hold MUTE/DELETE. The home area code

is now restored to its default setting of _ _ _(empty).

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you

must change the dial mode to pulse dialing before using the telephone.

Press MENU/SELECT in the idle mode to enter the main menu.

Press CID or DIR to scroll to >SETTINGS, then press MENU/SELECT.

Press CID or DIR to scroll to >DIAL MODE, then press

MENU/SELECT.

Press CID or DIR to choose between >TONE

and >PULSE.

Press MENU/SELECT to save the setting.

NOTE: If you have dial pulse (rotary) dialing service only, refer to Temporary tone dialing on

page 21 to temporarily switch from dial pulse to touch-tone dialing during a call.

DIAL MODE

>TONE

HOME AREA CODE

___

Telephone settings

Telephone base ringer volume

When the telephone base is not in use, press

/ /-VOLUME+ on the telephone base to set the

ringer volume level (1-6), or turn the ringer off. A

sample of the ringer sounds as you adjust the volume.

The telephone base announces, “Base ringer is off”

when you set the volume to 0.

NOTE: If a handset is on an outside call, the telephone base

volume cannot be changed.

Answering system settings

Go to Answering system settings starting on page 39 for instructions on how

to use a handset to modify the answering system settings shown below.

Setting Page(s)

Announcement (record, play and delete) 39-40

Answer on/off 40

Call screening 41

Number of rings 41

Remote access code 42

Message alert tone 42

Recording time 43

Voice language 43

Page is loading ...

AT&T EL52201 User manual

Brand: AT&T

Model: EL52201

Category: Telephones

Type: User manual

This manual is also suitable for

Download PDF

report

AT&T EL52201 User manual

This manual is also suitable for

AT&T EL52201 User manual

Related papers

Other documents