10/100Mbps Auto-Negotiation Ethernet Adapter
Description:
::
:
M-NTPCI100 is a PCI2.2 compliant 10/100M auto-negotiation Ethernet adapter. It meets ACPI
power management standards and has a remote boot function. M-NTPCI100 provides a reliable
and efficient hardware solution for wired networking to your PC.
Features:
::
:
• Complies with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards
• Complies with PCI and PCI2.2 standards
• Supports 32-bit PCI-Bus Revision2.1
• Supports clock frequency of up to 40MHz
• Auto-negotiation 10/100Mbps LAN port
• Supports full-duplex and half-duplex modes
• ACPI power management
Specification:
::
:
Chipset ADMTek AN983B
Standard and
Protocol
IEEE802.3 IEEE802.3u
IEEE802.3x
BUS Type 32bit /33MHz PCI BUS
Network Interface RJ45
I/O Address System auto assign
Disconnected
( IRO)
System auto assign
Half/Full Duplex Transfer
Rate
10/20Mbps
100/200Mbps
Operating Temperature
0℃~40℃(32F-112F)
Operating
Humidity
10%-90% (non-condensing)