American Standard 3630 User manual
- Category
- Sanitary ware
- Type
- User manual
This manual is also suitable for
B21
© 2006 American Standard Inc.
AMARILIS
THREE-HANDLE BATH/SHOWER FITTING
GENERAL DESCRIPTION:
Cast brass valve body on 8 inch centers. Amarilis 1/4 turn
washerless ceramic disc valve cartridges - reversible for
use with either lever or round handles. 1/2" female NPT
inlets/outlets. Easy clean 4-1/2" diameter "Rain"
showerhead with 2.5gpm/9.5L/min. flow restrictor. Cast
brass shower arm. Brass tub spout. Third handle
provides positive diverting action between showerhead
and tub spout.
Handles must be ordered separately.
MODEL NUMBER:
3630.000 Bath/Shower Fitting
I.P.S. spout. Less handles.
Handles must be ordered separately.
PRODUCT FEATURES:
Brass Construction: Durable. Ideal for prolonged
contact with water. Provides the finest surface for
application of finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Increased rough-in: 42mm to 86mm (1-5/8 to 3-3/8).
Exclusive Fixation Plate Design: Provides water-tight
seal around valves, even against pliable, uneven walls.
Wall escutcheon snaps easily into place.
Wide Selection of Styles and Configurations: Full
range of interchangeable handle styles.
SUGGESTED SPECIFICATION:
Three handle bath/shower fitting shall feature cast brass construction. Shall also feature 1/4 turn washerless ceramic disc valve
cartridges that are reversible for use with round or lever handles. Fitting shall be American Standard Model # 3630.000.___ and
handle kit # 0000.___.___.
178mm
(7)
REF.
FINISHED
WALL
32mm(1-1/4)
DIA HOLE
102mm
(4)
TOP OF
TUB RIM
OPTIONAL TO
FINISHED FLOOR
USUALLY
BETWEEN
1651 - 1981
(65 - 78)
1/2" N.P.T.
SHOWER ARM
32mm
(1-1/4)
DIA HOLE
1/2" N.P.T.
SPOUT NIPPLE
305mm
(12)
OPTIONAL
38mm
(1-1/2)
2"
(51mm)
74" FOR HEAD
CLEARANCE
(188cm)
8-1/2"
(215mm)
(3) 46mm (1-13/16) DIA.
HOLES FOR VALVES AND
TRANSFER VALVE ON
203mm(8) CENTERS
CROSS
BRACE
45mm
(1-3/4)
28mm
(1-1/8)
DIA.
UNION INLET
1/2"-14 N.P.T.
1/2 N.P.T.
TO SHOWER
75mm
(3)
64mm ± 22mm
(2-1/2 ± 7/8)
38mm
(1-1/2)
B22
© 2006 American Standard Inc.
AMARILIS
THREE-HANDLE BATH/SHOWER FITTING
CODES AND STANDARDS
T
hese products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
To order Less Handles - Specify: 4 digit style number followed by three zeros and 3 digit finish number.
Example 3630.000.002 = Bath/Shower Fitting in Polished Chrome finish.
Handles must be ordered separately.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold. Restricted showerhead.
0
5
10
15
20
SHOWER
SPOUT
80604020
3630.000
Bath/Shower. I.P.S. spout. Less handles.
Product
Number
Description
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Lexington
Triune
Cross
903
913
863453 443 463 433 553
Metal
Cross
Metal
Lever
Porcelain
Cross
Perfume
Bottle
543 573
Metal
Lever
Metal
Cross
Porcelain
Lever
The above fittings will accept the following Amarilis-Series handles.
*EverClean™ Finish:
• Offered on Polished Chrome (002) finish.
• One wipe effortlessly removes spots.
• Eliminates the need for cleaners and scrubbing.
Finish Options*
-
1
-
2
American Standard 3630 User manual
- Category
- Sanitary ware
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard R110SS User manual
-
American Standard One T064.501 User manual
-
-
-
-
-
-
-
-
