Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-20245 – Water Softening Systems – WS-80 Page 1 of 2
WATER SOFTENING SYSTEMS –
WS-80
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartservice.com
WATER SOFTENING SYSTEMS - WS-80
FEATURES:
Operating Profile
Softener will remove hardness to less than 1/2 gpg when oper-
ated in accordance with the operating instructions. The system
includes two tanks. This duplex conguration operates with
one tank on-line during service. During regeneration cycles,
one tank provides water to service and to the regenerating tank.
A water meter initiates system regeneration. The water meter
measures the processed volume and is adjustable. Service ow
is down-ow and regeneration ow is up-ow.
Regeneration Control Valve
The regeneration control valve is top mounted (top of media
tank), and manufactured from non-corrosive materials. Control
valve does not weigh more than four pounds. Control valve
provides service and regeneration control for two media tanks.
Inlet and outlet ports accept a quick connect, double o-ring
sealed adapter. Interconnection between tanks is made through
the regeneration valve with a quick connect adapter. Control
valve operates using a minimum inlet pressure of 15 psi. Pres-
sure is used to drive all valve functions. No electric hook-up is
required. Control valve will incorporate four operational cycles
including; service, brine draw, slow rinse, and a combined fast
rinse and brine rell. Service cycle operates in a down-ow di-
rection. The brine cycle ows up-ow, opposite the service ow,
providing a countercurrent regeneration. Control valve contains
a xed orice eductor nozzle and self-adjusting backwash ow
control. The control valve will prevent the bypass of hard water
to service during the regeneration cycle.
Media Tanks
The tanks are designed for a maximum working pressure of 125
psi and hydrostatically tested at 300 psi. Tanks are made of en-
gineered plastic with a 2.5 in. threaded top opening. Each tank
is NSF approved. Upper distribution system is of a slot design.
Lower distribution system is of a at plate design. Distributors
will provide even ow of regeneration water and the collection of
processed water.
Conditioning Media
Each softener includes uniform bead cation resin having a mini-
mum exchange capacity of 30,000 grains/ft when regenerated
with 15.0 lbs/ft. The media is solid, of a proper particle size
and contains no plates, shells, agglomerates or other shapes,
which might interfere with the normal function of the water
softener.
Brine System
A combination salt storage and brine production tank is manu-
factured of corrosion resistant, plastic. The brine tank has a
chamber to house the brine valve assembly. The brine oat
assembly allows for adjustable salt settings and provides for a
shut-off to the brine rell. The brine tank includes a safety over-
ow connection to be plumbed to a suitable drain.
Salt Alarm
Salt alarm consists of an alarm box and a brine sensor. Brine
sensor is mounted internally on the grid plate and operates on
the specic gravity of proper brine concentration. An alarm
condition is triggered when the concentration falls below ac-
ceptable level for more than 15 minutes. The alarm is both an
80-db audible alarm every 3 seconds and a red LED ash every
7 seconds. The alarm box operates on three AA batteries and
connects to the brine sensor with a standard 2-wire phone cord
(7' phone cord supplied).
MODEL:
❑ Model WS-80
Specications, Details and Dimensions on Back.
Model WS-80
Salt Alarm
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartservice.com
Page 2 of 2 F-20245 – Water Softening Systems – WS-80
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Printed On Recycled Pap
WATER SOFTENING SYSTEMS –
WS-80
F-20245 (REV. 02-2011) LITHO IN U.S.A. (H-01)
System Components
Media Vessel (qty) Size .............................................................(2) 8 x 17”
Media Vessel Construction ........Fiberglass Wrapped Engineered Plastic
Empty Bed Volume .......................................................................0.40 ft
3
Media Type ....................................................Uniform Bead Cation Resin
Media Volume ...............................................................................0.40 ft
3
Bed Depth ....................................................................................Packed
Free Board ...................................................................................... None
Riser Tube ...................................................................................1” CPVC
Distributor Upper ........0.012” Slots, Engineered Plastic Basket
Lower ..........0.009” Slots, Stainless Steel Flat Plate
Under bedding .................................................................................None
Regeneration Control ..........................................Non-electric Use Meter
Regeneration Type ............................................................Countercurrent
Meter Type ................................0.30 - 25.00 gpm Polypropylene Turbine
Inlet Water Quality
Pressure Range .......................................15 – 125 psi Dynamic Pressure
Temperature Range ...............................................................35 – 160
o
F
Temperature (Continuous) .............................................................150
o
F
pH Range ..................................................................................5 – 10 SU
Free Chlorine Cl2 (Max.) ..............................................................2.0 mg/l
Hardness as CaCO3 (Max.) ...........................................................40 gpg
Operating Specs
Flow Range (15 / 30 psig) ...............................................10.2 – 16.4 gpm
Flow Conguration ..................................................................Alternating
Dimensions (width x depth x height) ...................................20 x 22 x 28”
Weight (Operating / Shipping) .............................................220 / 100 lbs.
Connections
Inlet / Outlet Connections ..........................Custom Adapter and Bracket
Drain Connection ......................................................................0.5” Tube
Brine Line Connection ............................................0.375” Tube (internal)
Overow Connection .................................................................0.5” Tube
Power ...............................................................................................None
Salt Alarm...........................................................................3 AA Batteries
System Part Numbers
WS-80, Compact Cabinet Softener ......................................913091-125
Brine Tank Options
Tank Description ...................................................................208 Cabinet
Tank Height .........................................................................................28”
Tank Footprint .............................................................................20 x 22”
Material ...........................................................................................HDPE
Salt Capacity ..................................................................................80 lbs.
Regeneration Specifications
Regeneration Volume ...............................................................14 gallons
Regeneration Time ..................................................................11 minutes
Backwash Flow Control ............................................................1.40 gpm
Brine Rell Flow Control ............................................................0.40 gpm
20"
22"
28"
Disc Selection
(Compensated Hardness*)
Setting Capacity Efficiency Dosing Meter Disc 1 2 3 4 5 6 7 8
1.4 lbs. 4,818 grains 3,442 gr./lb. 3.5 lbs./ft
3
5 11 17 22 27 32 35 40
Gallons/Regeneration: 732 366 244 183 146 122 105 92
Flow during regeneration (@ 15 psig): 10.2 10.2 10.2 10.2 10.2 8.3 6.7 5.5
*Compensated hardness in gpg = Hardness + (3 x Fe in mg/l)
1.75"
/
