Intermec MobileLAN Card11 Quick start guide
- Category
- Networking
- Type
- Quick start guide
Intermec MobileLAN Card11 is a Wi-Fi-certified PC card that enables wireless LAN connectivity for various client devices. It supports data rates up to 11 Mbps and offers enhanced security features, allowing users to connect to wireless networks and access data and resources securely. The card provides seamless roaming capabilities, enabling users to move freely within the coverage area without losing connectivity. It has a compact design and is easy to install, making it suitable for mobile professionals and users who require wireless connectivity on the go.
Intermec MobileLAN Card11 is a Wi-Fi-certified PC card that enables wireless LAN connectivity for various client devices. It supports data rates up to 11 Mbps and offers enhanced security features, allowing users to connect to wireless networks and access data and resources securely. The card provides seamless roaming capabilities, enabling users to move freely within the coverage area without losing connectivity. It has a compact design and is easy to install, making it suitable for mobile professionals and users who require wireless connectivity on the go.
MobileLAN
™
card 11
Quick Start Guide
P/N 071788-001
32
Intermec Technologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. service and technical support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian service and technical support: 1-800-668-7043
Canadian media supplies ordering information: 1-800-268-6936
Outside U.S.A. and Canada: Contact your local Intermec service
supplier.
The information contained herein is proprietary and is provided solely for
the purpose of allowing customers to operate and/or service Intermec
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change
without notice.
© 2001 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, INCA (under license), MobileLAN,
JANUS, IRL, Trakker Antares, EZBuilder, TE 2000, Data Collection
Browser, dcBrowser, Universal Access Point, UAP, Duratherm, EasyCoder,
Precision Print, PrintSet, Virtual Wedge, and CrossBar are either
trademarks or registered trademarks of Intermec.
Throughout this manual, trademarked names may be used. Rather than put
a trademark (™ or ®) symbol in every occurrence of a trademarked name,
we state that we are using the names only in an editorial fashion, and to
the benefit of the trademark owner, with no intention of infringement.
Contents
Client Requirements 5
Unpack the Box 5
Install the Software 6
Install the MobileLAN card 11 Driver 8
Configure the PC Card’s TCP/IP Properties 10
Configure the Radio Parameters 11
Specifications 12
54
Client Requirements
The MobileLAN card is Wi-Fi-certified for
interoperability with other IEEE 802.11b HR wireless
LAN devices.
Hardware Requirements
• Available Type II or Type III PC card slot
• CD-ROM drive (to install software from CD)
• 5MB free disk space for the driver, the Intermec CORE application, and
the MobileLAN card 11 module
Software Requirements
• Windows
®
operating system (95/98/ME/NT4.0/2000) and Windows CD
Note: If your client is running Windows 95, the Windows 95 version
must be OSR 2 or higher and it must be running Internet Explorer 4.0 or
higher.
• Other CDs that support your client (e.g. IntranetWare Client for
Windows 95)
• PCMCIA revision 2.10-compliant card and socket services
Unpack the Box
These items are included in the box:
• MobileLAN card 11 PC card
• MobileLAN card 11 CD (in paper sleeve)
• MobileLAN card 11 Quick Start Guide
• (ETSI versions only) MobileLAN card 11 Safety Supplement
1
™
76
Install the Software
1. Insert the MobileLAN card 11 CD into your client.
2
2. Verify the File Download dialog box appears.
3. Click Run this program from its current location and then click OK.
You may see a Security Warning message box. Click Yes to continue
the installation.
Or, click Save this program to disk and then click OK. Browse to a
directory where you want to save SETUP.EXE. You will need to run
SETUP.EXE to continue the installation.
4. Verify that the Installation Wizard starts. When the Welcome screen
appears, click Next.
The CD starts automatically and you will see the CD home page with
menu buttons. If you do not see this home page, from the Start menu
choose Run. In the Open field, type
X
:\INDEX.HTM, where X is the
CD-ROM drive.
BJU005 .eps
CD
CD drive
5. For a default installation, click Next three more times. The software is
copied to your client.
6. (Windows 95 only) When the Winsock2 Setup message box appears,
click OK.
7. When the Installation Complete screen appears, click Finish.
8. (Windows 95 only) Reboot the client.
Click Next.
Click
Install
Software.
98
Install the MobileLAN card 11 Driver
Note: These screens are from a client that is running Windows 98. If
your client is running Windows 95/ME/2000, the screens should look
similar. If your client is running Windows NT 4.0, follow the procedure
“Configuring the PC Card for Windows NT 4.0” in Chapter 2 in the
MobileLAN card 11 User’s Guide (Part No. 071789).
1. Insert the MobileLAN card 11 into your client.
3. Browse to the directory where the driver was installed, choose
CW10.SYS, and click OK. The default directory is c:\Program
Files\MobileLAN card 11\Driver.
4. Click OK twice. The Intermec MobileLAN card 11 Properties dialog
box appears.
5. Click OK. You will configure these properties later using the Intermec
CORE application and the MobileLAN card 11 module.
6. Verify that the Copying Files message box appears.
BJU004.eps
PC card
slot
MobileLAN card 11
Windows automatically detects the PC card. The Found New
Hardware message box and then the Building Driver Information
Database message box appear.
2. When you see a message box stating, “Please insert the disk labeled
‘Intermec MobileLAN card 11 Driver and then click OK,’” click OK.
The New Hardware Found dialog box appears.
7. As the driver files are being copied to the appropriate locations, you
may be prompted to insert the Windows CD or other CDs that support
your client. Insert the CDs and click OK or click Browse and navigate
to the files.
Also, you may see Version Conflict dialog boxes. Usually, you should
click Yes to use the most recent files.
You may hear a beep when you have successfully installed the
MobileLAN card 11 driver.
3
Click
Browse.
1110
Configure the PC Card’s TCP/IP Properties
1. Open the Control Panel and double-click the Network icon. The
Network dialog box appears.
If you do not see TCP/IP -> Intermec MobileLAN card 11, follow the
procedure “Verifying and Installing the PC Card’s Network Protocols”
in Chapter 2 in the MobileLAN card 11 User’s Guide.
Configure the Radio Parameters
• From the Start menu choose Programs, Intermec, and then MobileLAN
card 11. The Intermec CORE application with the MobileLAN card 11
module opens.
4
5
Click
TCP/IP and
then click
Properties.
2. Contact your system administrator to determine which properties you
need to set.
The MobileLAN card 11 Configuration dialog box appears.
For help, see the online help.
Click Advanced to
configure more
parameters.
From the Configure menu
choose Configure
MobileLAN card 11.
12
Part No. 071788-001
*071788-001*
*071788-001*
Specifications
Physical Specifications
Dimensions (LxWxH): 114.3 x 54 x 5 mm (4.5 x 2.1 x 0.2 in)
Weight: 50 g (1.75 oz)
Environmental Specifications
Operating Temperature: 0°C to 55°C (32°F to 131°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Operating Humidity: 0 to 70% non-condensing
Storage Humidity: 0 to 95% non-condensing
Radio Specifications
Frequency Band: 2400 ~ 2483.5 MHz (U.S., Canada, ETSI)
2400 ~ 2497 MHz (Japan)
Operating Channels: IEEE 802.11b High Rate (HR) compliant
Radio Technology: Direct Sequence Spread Spectrum
Data Rate: 1/2/5.5/11 Mbps
Output Power: 13 dBm to 20 dBm (50 mW) maximum
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Intermec MobileLAN Card11 Quick start guide
- Category
- Networking
- Type
- Quick start guide
Intermec MobileLAN Card11 is a Wi-Fi-certified PC card that enables wireless LAN connectivity for various client devices. It supports data rates up to 11 Mbps and offers enhanced security features, allowing users to connect to wireless networks and access data and resources securely. The card provides seamless roaming capabilities, enabling users to move freely within the coverage area without losing connectivity. It has a compact design and is easy to install, making it suitable for mobile professionals and users who require wireless connectivity on the go.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Intermec MobileLAN access 2102 System Manual
-
Intermec MobileLAN access WA21 System Manual
-
Intermec MobileLAN access WA2XG System Manual
-
-
-
-
-
Intermec EasyADC Installation guide
-
-
Intermec Trakker Antares 2400 User manual
