Hobart HS9N User manual

Type
User manual

This manual is also suitable for

Hobart HS9N is a versatile meat slicer capable of slicing a wide variety of meats, cheeses, and vegetables with precision and ease. Its durable construction and powerful motor ensure reliable performance in commercial kitchens. The thickness of the slices can be adjusted to suit your needs, and the built-in sharpener keeps the blade in optimal condition. Cleaning the Hobart HS9N is also a breeze thanks to its removable parts and dishwasher-safe components.

Hobart HS9N is a versatile meat slicer capable of slicing a wide variety of meats, cheeses, and vegetables with precision and ease. Its durable construction and powerful motor ensure reliable performance in commercial kitchens. The thickness of the slices can be adjusted to suit your needs, and the built-in sharpener keeps the blade in optimal condition. Cleaning the Hobart HS9N is also a breeze thanks to its removable parts and dishwasher-safe components.

INSTRUCTION MANUAL
FOR
MEAT SLICER, HOBART MODEL HS6N
THROUGH HS9N
DISTRIBUTION STATEMENT C: AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRAC-
TORS; ADMINISTRATIVE/OPERATIONAL USE; 30 SEPTEMBER 2014. OTHER REQUESTS FOR THIS
DOCUMENT SHALL BE REFERRED TO NSWC PHILADELPHIA, CODE 944.
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE
ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT ADMINISTRA-
TION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C., APP. 2401 ET. SEQ.). VIOLATIONS OF THESE
EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.
DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS
OR RECONSTRUCTION OF THE DOCUMENT.
S6163-E4-FSE-010
TITLE-1 / (TITLE-2 Blank)@@FIpgtype@@TITLE@@!FIpgtype@@
@@FIpgtype@@TITLE@@!FIpgtype@@
PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND
*0910LP1137726* 30 SEP 2014
TITLE-2
@@FIpgtype@@BLANK@@!FIpgtype@@
RECORD OF CHANGES
REVISION NO. TITLE AND/OR BRIEF DESCRIPTION DATE
S6163-E4-FSE-010
RECORD OF CHANGES-1 / (RECORD OF CHANGES-2 Blank)
RECORD OF CHANGES-2
@@FIpgtype@@BLANK@@!FIpgtype@@
FOREWORD
Ships, training activities, supply points, depots, Naval Shipyards, and Supervisors of Shipbuilding are
requested to arrange for the maximum practical use and evaluation of NAVSEA technical manuals (TMs). All
errors, omissions, discrepancies, and suggestions for improvement to NAVSEA TMs shall be submitted as a
Technical Manual Deficiency/Evaluation Report (TMDER). All feedback comments shall be thoroughly investi-
gated and originators will be advised of action resulting therefrom. Three copies of the NAVSEA/SPAWAR
Technical Manual Deficiency/Evaluation Report form, NAVSEA 4160/1 are included at the end of each separately
bound hardcopy TM. Copies of form NAVSEA 4160/1 may also be downloaded from: https://
nsdsa.nmci.navy.mil/nsdsarepository/TMDER_BLANK_REV_9-2010-1.pdf
The Following methods are available for generation and submission of TMDERs:
The most expedient and preferred method of TMDER generation and submission is via the Technical
Data Management Information System (TDMIS) website at: https://nsdsa.nmci.navy.mil/
TDMIS accounts can be requested at: https://nsdsa.nmci.navy.mil/
When internet access is not available, submit TMDER via hardcopy to: COMMANDER, CODE 310
TMDERs, NAVSURFWARCENDIV NSDSA, 4363 MISSILE WAY, BLDG 1389, PORT HUENEME,
CA 93043-4307
TMDERs against classified TMs must be submitted using the hardcopy method cited above.
Urgent priority TM deficiencies shall be reported by Naval message with transmission to Port Huen-
eme Division, Naval Surface Warfare Center (Code 310), Port Hueneme, CA. Local message handling
procedures shall be used. The message shall identify each TM deficiency by TM identification num-
ber and title. This method shall be used in those instances where a TM deficiency constitutes an urgent
problem, (i.e., involves a condition, which if not corrected, could result in injury to personnel, damage
to the equipment or, jeopardy to the safety or success of the mission).
Complete instructions for TMDER generation and submission are detailed on the NSDSA website at:
https://nsdsa.nmci.navy.mil/tmder/tmder.asp
S6163-E4-FSE-010
FOREWORD-1 / (FOREWORD-2 Blank)
FOREWORD-2
@@FIpgtype@@BLANK@@!FIpgtype@@
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Hobart HS9N User manual

Type
User manual
This manual is also suitable for

Hobart HS9N is a versatile meat slicer capable of slicing a wide variety of meats, cheeses, and vegetables with precision and ease. Its durable construction and powerful motor ensure reliable performance in commercial kitchens. The thickness of the slices can be adjusted to suit your needs, and the built-in sharpener keeps the blade in optimal condition. Cleaning the Hobart HS9N is also a breeze thanks to its removable parts and dishwasher-safe components.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI