Volkswagen RCD550 Installation guide

Brand: Volkswagen

Model: RCD550

Category: Car video systems

Type: Installation guide



 1/4



RCD550interfaceinstallationmanual_v120303

 [producttype:FV‐RCD550]



 This interface can insert High definition RGB navigation video,

AVandreversecameravideoontoRCD550carscreens.Thefeatures

are:

 A daughter board is used to insert High definition RGB

navigationandothervideoonto

theOEMscreen.

 Oem NAVIkeyisused

toswitch

the video input. Reverse

camera trigger signal is

automaticallygenerated.

 Guaranteeddigitalvideoquality

onscreen.Whichalsooffervery

nicereliability.



1．Systemconnection



Thedaughterboardwithisolationtubeisusedtoswitch

thevideofromboardtoLCD.

Insertthered ribbonofLCD ontothe daughterboard,

whileinsertthewhiteribbonbacktoOEMPCBsocket.



NAVIAV1,AV2Rearview

3 keys for

colortuning.

Extrakeypad

The 4P touch panel should go

through the daughter board

thus the touch can be used to

installed navigation

com

uter.

Touch to

externalnavi

To Interface’s

CTRLport

TheCANbox’s4inputwiresshouldbewiredtotherearoftheRCD550:

Redwithfuse‐‐‐‐to‐‐‐constantBATTorACC

Brown‐‐‐‐to‐‐‐carchassisforGround.

Blue‐‐‐‐to‐‐‐CANbus+[printedonthetopofheadunit.]

Gray‐‐‐‐to‐‐‐CANbus‐

Correctconnectionwillmakethecanbox’s

LEDwhenworking.



 2/4



DIPswitchsetting:

DIP =ON[DIP=Downside.] =OFF

1 RGBenabled RGBdisabled.

2, AV1forDVDenabled AV1disabled

3 AV2forTunerorextravideoenabled AV2disabled

4 RGB=HDRGB[800X480orVGA640X480]

Suggestedinput.

RGB=NormalNTSC[480X240]

5 Thisisreversecameratriggerwire

gotoCAMwhenGreenwire=12V]

gotocarvideowhenGreenwire=12V

6 IRprogrammewhenoncetoON

TouchcalibrationwhengettoON>5times.

OFFfornormalwork.

7,8 DIP8=DOWN:forRCD550(important)

DIP8=OFF(UPside)meansfactorytestmodeofthisinterface,thescreenmayshownoiseorblackscreen[notdamage

anything],iftheinstallercannotseetheinsertedvideo,probablythisdipgoeswrong.



2．InterfaceSettings



Thesignaldefinitionof6PoninterfacefromCANbox：

Yellow：constantpowerof12V。black：GNDofchassis。

RED[ACC]：whenthemonitorworks,thiswire=12V，otherwise=0V。

Green：reversesignalwire[=12Vwheninreverse],itcanbeused:

 Togivereversesignaltointerfacebox，alsogivingpowertocamera[max.1A]

 Whengivingpowertocamera,a100u

capacitorisnecessaryonthiswiretofilterthenoiseoncameralong

wires.

 Whenonlygivereversesignaltointerface,andcameraispoweredelsewhere,donotaddcapacitor。

Whitewire：switchsignalwire,when=12Vor5V,thisinterfaceswitches.

Graywire：CANbuscontroldatato

interface,itisusedtopopupthecontrolicons.Seenote2ontheendofthiswire.

 The3sidekeysare:menu,+,‐respectively.Whenmenuispressed,OSDstrings

willpopuponscreen,andtheinstallermayadjustthebestvideoeffect.The

+/‐willchangethevalue.

 The DVD/TUNER/NAVI is to set the IR code output to the installed device, so



peopleuseoriginalknobtocontrol

 Whensetto “none”，thecontroliconswillnotpopout

 Whensetto “Prog”，theinstallercanuseDIP6=DowntoprogramtheIRcode

intotheinterface,soextranewdevicescanbecontrolled.



When the menu is pressed twice, any menu will pop up to show the

horizontal/verticalvideolocationadjustment,the55/06isthebestvalue.

(defaultvalue.)



 3/4



4. Video switch among different inputs

 The user may press the LEFT key to switch the inputs of

interface.

 The RIGHT arrow key can be used to pop up the

multimedia control icons, the user pressed the down

arrow key to execute the icon.

 The user may also use extra keypad to switch the inputs,

in this case, the white wire of the 6P wire between CAN

box and interface should be cut off.[suggested.]



3. CTRL port

Thereisa8‐pin extraCTRLport on theinterface,the RCD550 isalready usingittoswitch thetouchpanel4P

signals.

Theinstallerdoesnotneedtousetheotherfunctionsofthis4Pinnormalsituation.Forexperiencedusers,this

portmaybeusedtogetextra

functions.



Ctrlportsignaldefinitions：

Pin1,2 +5Voutputvoltageforsound‐switch‐relay,whenAV1isselected=5V,0VwhenAV2selected.Max3A.

3: Constant+5V  Max.2A

4，8

Ground

5:

Dedicated control bus for camera。

ShouldnotbeconnectedtoGND,otherwiseCPUwillhalt.

6:

7 +5Voutputwhenininterfacemode,0VwheninCarmode.

Note2:

There is a gray wire between the can box and interface box, which is used to deliver control data, so that

multimediaiconswillpopoutandbeexecuted.Thiswirecanalsodeliverterminal‐modecontroldata.Soa3

party

computer can control this interface.[ terminal mode like: to directly go to RGB input,  to AV1 input, AV2

input,reverse camera input], to get the full implementation of fosp interface terminal mode operations, please

contactfospsalespeople.

TheprogrammingofIRcode：

 Thereare>10typesofDVD,NAVI,andTuners’IRcodearestoredinsidetheinterface.Theinstallerjustadjuststheoptionstoselectto

wantedone,thenitworks.Ifthewantedtypeisnotthere,hemaysettheoptiontobe“Prog”inthemenu.

 When

programming ,switchtheinputtoAV1,andsetDIP6downonce,thenthecontroliconswillbeshown,andoneofthethemwill

beblinking.Pointthe IR remote controllerto the IR port ofinterface,the blinkingiconwill be movedtothe next one. Which means

one

codeisprogrammed.Repeatthisstepuntilalliconsareprogrammed.

 TheprogrammingofAV2isthesameasabove.



 4/4



4.Parameters

No. name parameter

1 RGBvideoamplitude 0.7Vppwith75ohmimpedance

NTSCresolution[400X240,480X240]ofnavigationisallowed.

Suggested:800X480RGBHD.

2 syncamplitudeinRGB‐naviport 3~5Vppwith5Kohmimpedance

SyncshouldbeNTSCcompositewithnegativepolarity.

3 Av1,Av2,camvideoamplitude 0.7Vppwith75ohmimpedance

4 Av1,Av2,camstandard NTSC/PAL/SECAMautomaticswitch

5 

6 NormalworkPowerconsumption 2.4W[0.2A@12V]

7 Standbycurrent <5mA

8 Standbystart 10secondsaftertheusersswitchofftheCDunit.

9 Reversetriggerthreshold >5Vtrigger

10 Worktemperature‐40~+85C

11 dimensions

15.6X9.2X2.2Cm



Volkswagen RCD550 Installation guide

Brand: Volkswagen

Model: RCD550

Category: Car video systems

Type: Installation guide

Download PDF

report

Volkswagen RCD550 Installation guide

Volkswagen RCD550 Installation guide

Other documents