Garmin GDL® 82 Quick start guide

Type
Quick start guide

This manual is also suitable for

Garmin GDL® 82: Fly confidently with enhanced situational awareness and meet ADS-B Out requirements with this compact and lightweight transmitter. Transmit ADS-B Out messages to ATC and other aircraft, obtaining critical data from your transponder like squawk codes and altitude. Experience optional features like Anonymous Mode for added privacy and an ADS-B Out Fail Annunciator for peace of mind.

Garmin GDL® 82: Fly confidently with enhanced situational awareness and meet ADS-B Out requirements with this compact and lightweight transmitter. Transmit ADS-B Out messages to ATC and other aircraft, obtaining critical data from your transponder like squawk codes and altitude. Experience optional features like Anonymous Mode for added privacy and an ADS-B Out Fail Annunciator for peace of mind.

GDL 82
Pilot's Quick Start Guide
1 190-01810-03 Rev. B
GDL 82 SYSTEM
The GDL 82 is a UAT ADS-B transmitter that integrates with the
aircraft’s existing transponder, creating an ADS-B Out compliant
solution for flight in the U.S. below 18,000 feet.
GDL 82 SYSTEM FEATURES
GDL 82 Series
Transmits ADS-B Out messages to ATC and
other aircraft
Interrogates the interfaced transponder to
obtain squawk codes, IDENT status, and
pressure altitude
Optional Anonymous Mode
Optional ADS-B Out Fail Annunciator
GDL 82 w/ GPS/SBAS
Unit functions as its own position source for
ADS-B Out messages
190-01810-03 Rev. B 2
NOTE
When the aircraft is on any airport movement area, the
transponder should be in Altitude Reporting (ALT) mode.
NOTE
If filing a flight plan or requesting ATC services, do not
use Anonymous Mode.
TRANSPONDER
OPERATING MODE
GDL 82 OPERATION
ADS-B OUT MESSAGES
OFF - Turned off or no power Do not transmit.
STBY (standby) Do not transmit.
ON - Non-altitude reporting
Do not provide pressure
altitude information.
ALT (altitude reporting)
Provide all required
information.
ENABLE ANONYMOUS MODE
1. Set the Anonymous Mode switch to the enabled position.
2. Set the transponder to squawk VFR code 1200.
OPTIONAL ADS-B OUT FAIL ANNUNCIATOR
An illuminated annunciator lamp indicates the unit is not
transmitting ADS-B Out messages. Or, messages do not contain
all required information.
© 2017-2018
Garmin International, Inc., or its subsidiaries
All Rights Reserved
Except as expressly provided herein, no part of this guide may be
reproduced, copied, transmitted, disseminated, downloaded or
stored in any storage medium, for any purpose without the
express prior written consent of Garmin.
Garmin hereby grants permission to download a single copy of this
guide and of any revision to this guide onto a hard drive or other
electronic storage medium to be viewed and to print one copy of
this guide or of any revision hereto, provided that such electronic
or printed copy of this guide or revision must contain the complete
text of this copyright notice and provided further that any
unauthorized commercial distribution of this guide or any revision
hereto is strictly prohibited.
For warranty information, visit:
garmin.com/en-US/legal/aviation-limited-warranty
For aviation product support, visit:
flyGarmin.com
For ADS-B informational videos, visit:
garmin.com/en-US/learning-center/ads-b
190-01810-03 Rev. B
Made in the U.S.A.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Garmin GDL® 82 Quick start guide

Type
Quick start guide
This manual is also suitable for

Garmin GDL® 82: Fly confidently with enhanced situational awareness and meet ADS-B Out requirements with this compact and lightweight transmitter. Transmit ADS-B Out messages to ATC and other aircraft, obtaining critical data from your transponder like squawk codes and altitude. Experience optional features like Anonymous Mode for added privacy and an ADS-B Out Fail Annunciator for peace of mind.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI