SMC GLSC Owner's manual

SMC
Brand
SMC
Model
GLSC
Category
Network media converters
Type
Owner's manual

SMC GLSC

Below you will find brief product information for SMC GLSC, a media converter compliant with IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX. The device supports auto-MDI/MDI-X for the RJ-45 port and auto-polarity correction. It has a low power consumption, status LEDs for quick and easy network monitoring, and is compatible with other Gigabit 1000BASE-T/LX devices. SMC GLSC features an SC fiber interface and external power supply. It is FCC Class A & CE approved.

SMC GLSC

Below you will find brief product information for SMC GLSC, a media converter compliant with IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX. The device supports auto-MDI/MDI-X for the RJ-45 port and auto-polarity correction. It has a low power consumption, status LEDs for quick and easy network monitoring, and is compatible with other Gigabit 1000BASE-T/LX devices. SMC GLSC features an SC fiber interface and external power supply. It is FCC Class A & CE approved.

V2.0
Quick Start Guide
Installationskurzanleitung
Guide d'installation
Media Converter
Medienkonverter
Convertisseur de média
SMC-GLSC
0100-03807-2403
1000Base-T to 1000Base-LX
Media Converter
English 2 - 5
Deutsch 6 - 9
Francais 10 -13
Copyright & Notes 14
Package Contents
The following items should be included in the package:
•One media converter unit
•One AC adapter
• Self-adhesive pads (4 pieces)
•User’s Manual CD-ROM
•Warranty Card
(unit with SC connector shown below)
adapter
NOTE: Please visit us at www.smc-europe.com to register your
product and become eligible for various support services and
product information up-date!
English
Media Converter
1 2
EnglishEnglish
Setting-Up
1. Installation
There are two options:
• Wall-mount - Insert two screws into the wall-mount hole fixtures
• Desktop - Affix the 4 self-adhesive pads as indicated.
Under Panel View of Housing
2. Setting N-Way
Use the N-Way switch located (on the rear panel) to
enable/disable auto-negotiation feature.
• ON - Enables auto-negotiation feature
• OFF - Disables auto-negotiation feature
NOTE: Connected device must have auto-negotiation capabilities
activate N Way
View of Switch on rear panel
English
English
Features
• Complies with IEEE 802.3ab 1000BASE-T and IEEE 802.3z
1000BASE-LX
•Auto-MDI/MDI-X support for RJ-45 port
•Auto-polarity correction for RJ-45 port
• Low power consumption
• Status LEDs for quick and easy network monitoring
• Compatible with other Gigabit 1000BASE-T/LX devices
• SC fiber interface
• External power supply
• FCC Class A & CE approved
General Guide
3 4
(unit only available with
SC connector)
Front Panel View
Rear Panel View
Self-adhesive
pads
Self-adhesive
pads
Holes for wall-mounting
English
Fiber optic port
Status LED
indicators
UTP port
(RJ-45)
1000BASE-T to 1000BASE-LX Media Converter
3.Powering On
Connect the power adapter to the power jack (located on the
rear panel). Plug the adapter into power source. The green PWR
LED will light to indicate normal power status.
4. Connecting & LED Guide
LED Status Interpretation
LNK On Link established
RCV On Data traffic
FD On Full-Duplex mode enabled
Packungsinhalt
Prüfen Sie, ob folgende Artikel enthalten sind:
•1 Medienkonverter
•1 Netzteil
•4 Selbstklebende Auflagepuffer
• CD-ROM mit Benutzerhandbuch
• Garantiekarte
(Einheit unten mit SC-Anschluss abgebildet)
Netzteil
HINWEIS: Bitte besuchen Sie uns unter www.smc-europe.com bzw.
www.smc.de, um Ihr Produkt zu registrieren. Damit stehen Ihnen
umfassende Supportleistungen, wie u.a. Support, Handbücher und
Updates, zur Verfügung!
Deutsch
English
Medienkonverter
5 6
AC Power jack
Fiber optic (SC interface)
UTP (RJ-45 interface)
Page is loading ...
Page is loading ...
Page is loading ...
3.Mise en marche
Branchez le câble du transformateur sur la prise d’alimentation CA
(située sur la façade arrière). Branchez le transformateur sur une
source d’alimentation. Le témoin lumineux PWR vert s’allume pour
indiquer que l’appareil est sous tension.
4. Fonctions des témoins et liaisons
Témoin État Signification
LNK Allumé Liaison active
RCV Allumé Transmission de données
FD Allumé Mode Full-Duplex activé
Warranty
Complete warranty information for all SMC products is available on
the SMC web site at www.smc-europe.com and in the English
manual on the CD-ROM.
Full Installation Manual
Full installation manual in English is provided on the
Installation CD-ROM.
Copyright
Information furnished by SMC Networks, Inc. (SMC) is believed to
be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for
any infringements of patents or other rights of third parties
which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of
SMC. SMC reserves the right to change specifications at any time
without notice.
Trademarks:
SMC is a registered trademark and EZ Connect is a trademark of
SMC Networks, Inc. Other product and company names are
trademarks or registered trademarks of their respective holders.
Copyright
Français
13 14
Prise CA
Fibre optique (interface SC)
UTP (interface RJ-45)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

SMC GLSC Owner's manual

SMC
Brand
SMC
Model
GLSC
Category
Network media converters
Type
Owner's manual

SMC GLSC

Below you will find brief product information for SMC GLSC, a media converter compliant with IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX. The device supports auto-MDI/MDI-X for the RJ-45 port and auto-polarity correction. It has a low power consumption, status LEDs for quick and easy network monitoring, and is compatible with other Gigabit 1000BASE-T/LX devices. SMC GLSC features an SC fiber interface and external power supply. It is FCC Class A & CE approved.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents