Kettler 07648-500 User manual

Brand: Kettler

Model: 07648-500

Type: User manual

SLO

SRB

Montageanleitung

Crosstrainer „CROSS P”

Art.–Nr. 07648-500

Abb. ähnlich

Auf 100% Altpapier!

A 150 cm

B 67,5 cm

C 169 cm

57 kg

max.

130 kg

30 – 45 Min.

Please read these instructions carefully prior to carrying out assembly and using for the ﬁrst time. They contain

information which is important for your safety as well as for the use and maintenance of the appliance. Keep these

instructions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! Any other use of the equipment is prohibited and may

be dangerous. The manufacturer cannot be held liable for

damage or injury caused by improper use of the equipment.

RISK! Instruct people using the equipment (in particular children)

on possible sources of danger during exercising.

RISK! Incorrect repairs and structural modiﬁcations (e.g. removal

or replacement of original parts) may endanger the safety of the

user.

RISK! Heart rate monitoring systems may be inaccurate. Over

exercise may result in serious injury or death. If you feel faint

stop exercising immediately.

WARNING! The training device should be used only for its

intended purpose, i.e. for physical exercise by adult people.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! Any interference with parts of the product that are

not described within the manual may cause damage, or endanger

the person using this machine. Extensive repairs must only be

carried out by KETTLER service staff or qualiﬁed personnel trained

by KETTLER.

• The training device has been designed in accordance with the

latest standards of safety. Any features which may have been a

possible cause of injury have been avoided or made as safe as

possible.

• The training device corresponds with DIN EN 957 -1/-9, class

HB.

• In case of enquiry, please contact your KETTLER dealer.

• If the equipment is in regular use, check all its components thor-

oughly every 1–2 months. Pay particular attention to the tightness

of bolts and nuts. This is particularly true for the attachment of

grip strap, running plate and fastening of the handlebar and front

tube.

• Before beginning your program of exercise, consult your doctor

to ensure that you are ﬁt enough to use the equipment.

Base your program of exercise on the advice given by your doctor.

Incorrect or excessive exercise may damage your health!

• Before use, always check all screws and plug-in connections as

well as respective safety devices ﬁt correctly.

• Always wear suitable shoes when using.

• Our products are subject to a constant innovative quality

assurance. We reserve the right to perform technical modiﬁca-

tions.

• In choosing the location of the apparatus, ensure a sufﬁcient safety

distance from any obstacles. The apparatus must not be mounted

in the immediate vicinity of main passageways (paths, doorways,

corridors).

• Always observe the general safety rules and precautions for

working with electrical equipment.

• All electric appliances emit electromagnetic radiation when in

operation. Please do not leave especially radiation-intensive

appliances (e.g. mobile telephones) directly next to the cockpit

or the electronic controlsystem as otherwise values displayed might

be distorted (e.g. pulse measurement.

• The product is not suitable for use by persons weighing over 110

kg.

• Nobody may be in the moving range of a training person during

training

• This exercise machine may only be used for exercises indicated

in the training instructions.

• The surface on which the unit is placed must be ﬁrm and even.

Place rubber or straw mats under it to deaden any noise or

impacts. Only for appliances with weights. Avoid powerful oscil-

lations of the dumbbells!

• When mounting the product please take the recommended

torque information into account (M = xx Nm).

Instructions for Assembly

RISK Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.

Always dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

WARNING! Please note that there is always a danger of

injury when working with tools or doing manual work. Therefore

please be careful when assembling this machine.

• Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

• Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.

The correct sequence is given in capital letters.

• The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-

sible technically talented.

• The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as

instructed. The required tools are supplied with the equipment.

• Bolt all the parts together loosely at ﬁrst, and check that they have

been assembled correctly. Tighten the locknuts by hand until resis-

tance is felt, then use spanner to ﬁnally tighten nuts completely

against resistance (locking device). Then check that all screw con-

nections have been tightened ﬁrmly. Attention: once locknuts have

been unscrewed they no longer function correctly (the locking

device is destroyed), and must be replaced.

• For technical reasons, we reserve the right to carry out prelim-

inary assembly work (e.g. addition of tubing plugs).

Important Instructions

Handling the equipment

• Before using the equipment for exercise, check carefully to

ensure that it has been correctly assembled.

• It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust. Please ensure that no part of

the machine comes in contact with liquids (drinks, perspiration

etc.). This may cause corrosion.

• The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave unpre-

dictably and dangerous situations may occur for which the man-

ufacturer cannot be held liable. If, in spite of this, children are

allowed to use the equipment, ensure that they are instructed in

its proper use and supervised accordingly.

• The equipment is independent of revolutions per minute.

• A slight production of noise at the bearing of the centrifugal mass

is due to the construction and has no negative effect upon oper-

ation. Possibly occurring noise during reverse pedalling result from

engineering and are absolutely safe.

• The training device has a magnetic brake system.

• To operate correctly, the pulse function requires a minimum

voltage of 2,7 volts (only for computers working with batteries).

• Before beginning your ﬁrst training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

Care and maintenance

• Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts

should be replaced immediately and the equipment taken out of

use until this has been done. Use only original KETTLER spare

parts.

• To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be

serviced regulary (once a year) by specialist retailers.

• Use for your regular cleaning, maintenance and care our

appliance maintenance set (Article no. 07921-000) speciﬁcally

licensed for KETTLER Sports apparatus and available from the

Sport specialized trade.

• Please ensure that liquids or perspiration never enter the machine

or the electronics.

List of spare parts page 32-33

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the product

(see handling).

Example order: Art. no. 07648-500 / spare-part no. 68003531

/ 1 pieces / S/N .................... Please keep original packaging

of this article, so that it may be used for transport at a later date,

if necessary.

Goods may only be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original

box if possible. It is important to provide a detailed defect description

/ damage report!

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should

be clearly stated on the order by adding the words „with fastening

material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please

dispose of this article correctly and safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

+44 1527 591901 +44 1527 62423

www.kettler.co.uk e-mail: [email protected]

KETTLER International Inc.

1355 London Bridge Road +1 888 253 8853

Virginia Beach, VA 23453 +1 888 222 9333

www.kettlerusa.com

USA

Checkliste (Packungsinhalt)

Stck.

Pos. 45

ø 10x26

ø 8x16

ø 7

3x20

M 8

ø 7

ø 6

M8x60

M8x40

M8x20

M7x30

M6x40

ø 17x25

ø 8x19

ø 10x25

PVC

3x25

M8x55

4x M5x12

4x M8x16

2/4x M5x14

2/1x M5x14

6x M5x14

ø 17x25

ø 8x25

ø 8

ø 6

M8x16

– GB – Checklist (contents of packaging)

– CZ – Kontrolní seznam (obsah balení)

– SK – Kontrolný zoznam (obsah balenia)

– H – (Csomagolás tartalmának) ellenőrző listája

– SLO – Kontrolni seznam (vsebina embalaže)

– HR – Kontrolni popis (sadržaj pakovanja)

– RO – Lista de veriﬁcare (conţinutul pachetului)

– BG – Списък за проверка (съдържание на опаковката)

– SRB – Ček-lista (sadržaj pakovanja)

– GR – Κατάλογος ελέγχου (Uεριεχόµενο συσκευασίας)

Messhilfe für Verschraubungsmaterial

– D – Beispiele; – CZ – Příklad; – SK – Príklad; – H – Példa; – SLO – Primer;

– HR – Primjer; – RO – Exemplu; – BG – Пример; – SRB – Primer; – GR – Παράδειγµα

Schraubverbindung regelmäßig kontrollieren

– GB – The screwed connections must be controled

at regular intervals.

– CZ – Šroubové spojení pravidelně kontrolujte.

– SK – Pravidelne kontrolujte skrutkové spoje.

– H – Ellenőrizze rendszeresen a csavarkötéseket.

– SLO – Redno preverjajte vijačni spoji.

– HR– Redovito provjeravajte vijčani spoj.

– RO – Veriﬁcaţi regulat îmbinarea cu şuruburi

– BG – Винтовото съединение да се проверява редовно.

– SRB – Redovno kontrolišite vijčane spojeve.

– GR – Ελέγχετε την κοχλιωτή σύνδεση τακτικά.

– D – Gehört nicht zum Lieferumfang.

– GB – Not included.

– CZ – Nepatří do rozsahu dodávky

– SK – nie je v cene.

– H – Nem is.

– SLO – niso vključeni.

– HR– nisu uključene.

– RO – nu este inclus.

– BG – Не влиза в обема на доставка!

– SRB – Ne spada u opseg isporuke.

– GR – Δεν υUάγεται στον Uαραδοτέο

εξοUλισµό.

Ø 8x19

M 8x60 = 15 Nm

– GB – Measuring help for screw connections

– CZ – Měřící pomůcka pro materiál k přišroubování

– SK – Meracia pomôcka pre skrutky

– H – Mérési segítség a csavarozásnál használt anyagokhoz

– SLO – Merilni pripomoček za material za privijanje

– HR– Mjerno pomagalo za vijčani materijal

– RO – Ajutor pentru măsurarea materialului de înşurubat

– BG – Помощ за измерване на материали за завинтване

– SRB – Pomoć za merenje materijala za pričvršćivanje

– GR – Βοήθηµα µέτρησης για υλικό βιδώµατος

M 7x30

Ø 7

3x25

M5x14

M5x12

D/E

A/C

Ø 8x19

M 8x16 = 20 Nm

M 8x16

Ø 8x12,9

Ø 8x25

Ø 17,5x25

A/D

M 6x40

Ø6

3x25

M5x14

A/B

M 8x55

M 8

Ø 8x16

M 8x20

Ø 10x26

Ø 10x25

PVC

Ø 17x25

PVC

3x20

10x

M8x40

M5x14

8x19

A/C

3x25

M5x14

A/C

XXXXXXXX

XXXXXXXXXXXXXXXXXXXXXX

– D – Beispiel Typenschild - Seriennummer

– GB – Example Type label - Serial number

– CZ – Primer tipske ploščice – serijske številke

– SK – Príklad: Typový štítok – sériové číslo

– H – Például a készülék ismertető címkéjén található so-

rozatszám

– SLO – Primer tipske ploščice – serijske številke

– HR – Primjer tipske pločice - serijskog broja

– RO – Exemplu plăcuţa de fabricaţie - seria

– BG – Пример типова табелка – сериен номер

– SRB – Primer tipske pločice - serijski broj

– GR – Παράδειγµα Πινακίδα τύUου – Αριθµός

σειράς

Handhabungshinweise

– BG – Указания за работа

– SRB – Uputstvo za rukovanje

– GR – ΥUοδείξεις χειρισµού

– GB – Handling

– CZ – āPokyny k manipulaci

– SK – Pokyny k manipulácii

– H – Kezelési utasítások

– SLO – Napotki za ravnanje

– HR – Napomene o rukovanju

– RO – Indicaţii privind manipularea

Ersatzteilzeichnung

07648-500

1 1x 68003473

2 1x 68003380

3 1x 68003951

4 1x 68003329

5 1x 68003253

6 1x 68003254

7 1x 68003954

8 1x 68003955

9 1x 68003407

10 1x 68003895

11 1x 68003953

12 1x 68003405

13 1x 68003406

14 1x 68003956

15 1x 68003957

16 1x 68003408

17 2x 68003409

18 1x 68003904

19 1x 68003387

20 1x 68003388

21 1x 68003142

23 1x 68003410

24 1x 68003711

25 1x 68003712

26 1x 68003713

27 1x 68003714

28 1x 68003715

29 1x 68003716

30 1x 68003241

31 1x 68003071

32 1x 68003172

33 1x 68003066

34 2x 68003460

35 1x 68003067

36 2x 68003411

37 2x 68003412

38 1x 68003334

39 2x 68003046

40 1x 68003331

41 1x 68003332

42 1x 68003333

43 1x 68003170

44 1x 68003531

45 1x 68003464

– GB – Spare parts order

– CZ – Objednání náhradních dílů

– SK – Objednávanie náhradných dielov

– H – Pótalkatrész rajz

– SLO – Načrt nadomestnih delov

– HR – Nacrt rezervnih dijelova

– RO – Comandarea pieselor de schimb

– BG – Резервни части за

– SRB – Naručivanje rezervnih delova

– GR – Ανταλλακτικά για ανταλλακτικά

Ersatzteilbestellung

HEINZ KETTLER GmbH & Co. KG · Postfach 1020 · D-59463 Ense-Parsit

www.kettler.de

docu 2859/06.11

Kettler 07648-500 User manual

Kettler 07648-500 User manual

Kettler 07648-500 User manual

Related papers

Other documents