www.PyleUSA.com
4
Functions
1. SPEAKER IN: To connect an active device
2. MIC IN: Connect for Mic input
3. 3.5MM AUX IN: Connect Mobile device
4. TONE: Control the volume of the mic
5. VOL: Control the volume of the unit
6. BT: Will light up when wireless BT is connected
7. POWER: The unit display will light up
8. EXT SPEAKER: To connect a passive speaker
9. POWER SWITCH: Power switch ON/OFF the unit
10. POWER CORD CONNECTOR: Connect the IEC main power cable in order to
supply the unit with the fuse 250V/3.15A
Placement Tips
• Avoid placing loudspeakers in the corners of a room.
This increases the low-frequency output and can cause the sound to be muddy
and indistinct.
• Avoid placing loudspeakers against a wall. This, too, increases the low frequency
output, though not as much as corner placement. However, if you do need to
reinforce the low frequencies, this is a good way to do it.
• Avoid placing the active speakers directly on a hollow stage oor. A hollow stage
can resonate at certain frequencies, causing peaks and dips in the frequency
response of the room. It’s better to place the speakers on a sturdy table or tripod
stands.
• Position the speakers so the high-frequency drivers are two to four feet above ear
level to the audience to maintain high frequency quality.
Wireless Bluetooth Connectivity:
• Simple & Hassle-Free Pairing
• Instantly Receives Wireless Music Streaming
• Works with all of Today’s Latest Devices
• Smartphones, Tablets, Laptops, Computers, etc.
• Bluetooth Version: 4.2
• Bluetooth Name: PyleUSA
• Wireless Range: Up to 33’+ ft.