2. Chipolino
  3. Kid's toy tricycle Pulse

Chipolino Kid's toy tricycle Pulse Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Chipolino Kid's toy tricycle Pulse Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
This product is produced in accordance with requirements
of Toy safety Directive 2009/48/EC of the European Parliament and the Council,
Regulation regarding Essential Requirements and Conformity Assessment of
Toys, Regulation regarding Conformity Marking and the European standards
applicable for this toy.
PLEASE READ CAREFULLY THIS INSTRUCTION MANUAL
AND KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE!
INSTRUCTION MANUAL OF
KID’S TOY TRICYCLE
“PULSE”
1
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN
THIS MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT:
CAUTION! WARNINGS!
CAUTION! USE ONLY UNDER DIRECT ADULT SUPERVISION!
CAUTION! THIS TOY HAS NO BRAKES!
CAUTION! THE TOY IS NOT SUITBALE FOR CHILDREN UNDER 18 MONTHS!
CAUTION! USE FOR CHILDREN OLDER THAN 18 MONTHS AND WEIGHT UP TO 25kg.
CAUTION! DO NOT USE FOR CHILDREN OVER 25 kg – DANGER OF OVERLOADING THE TOY!
CAUTION! BEFORE USING THE TRICYCLE, TEACH THE CHILD THE CORRECT WAY TO USE
IT AND THE SAFETY RULES.
CAUTION! USE THE TOY ONLY FOR ITS PURPOSE.
CAUTION! USE THE TOY ONLY DURING THE DAY ON EVEN PLAYGROUNDS AND AT A SAFE
DISTANCE FROM STREETS OR ROAD LANES FOR VEHICLES.
CAUTION! TO AVOID THE DANGER OF INJURY ALWAYS REMOVE THE PUSH HANDLE
WHENEVER THE CHILD IS RIDING THE TOY ON HIS OWN!
CAUTION! KEEP AWAY FROM FIRE OR OTHER HEAT SOURCES!
ONLY adult assembly of TOY is required!
DO NOT allow presence of children under 3 years before assembly of the TOY is complete.
In this way, you will avoid their access to small or loose parts!
The TOY is intended for one child at a time ONLY!
DO NOT let other children push the tricycle!
The TOY is NOT suitable for running or skating!
StopusingtheTOYifyoundmissingordamagedparts.
DO NOT let the child stand on the footrest or the seat to avoid injury.
The child must wear shoes when using the TOY!
DO NOT tie strings or accessories to the TOY in order to avoid the risk of suffocation.
DO NOT place more than 0,2 kg load in the front storage basket.
DO NOT place more than 0,5 kg load in the rear storage basket.
DO NOT put items or luggage in the handle bar or the parent handle in order to avoid risk of injury
resulting from the toy’s instability and tipping over!
DO NOT place items or heavy objects in the TOY or on it during storage or transportation to avoid
damage to the frame.
DO NOT use another transport means to move the TOY by pulling it.
DO NOT allow the child using the TOY or other children around it to touch the wheels or put items in
them.
Use away from rivers, pools, stairs or hurdles!
Do notmakechangesormodicationstotheTOYframe!Ifnecessary,contacttheretaileroran
authorized service center for advice and repair.
Use only spare parts, which are approved by the producer and recommended by the distributor or
company service! The producer revokes all responsibility in case parts different from the original
ones have been used.
Keep nylon packages away from children to avoid risk of suffocation!
2
Suitable for children older than 18 months with weight up to 25 kg.;
TOY can be driven by the child using the pedals;
TOY can be pushed by an adult and the child lays his feet on the foot rest;
Safety bumper;
Foot rest;
Adjustable canopy;
Front and rear storage baskets.
This is a functional TOY whose purpose is to create in the child initial skills to coordinate its arms
and feet when riding a tricycle or bicycle.
IMPORTANT! Remove the parent handle when you are sure that the child can ride the tricycle on
his own and unaided.
PRODUCT FEATURES
MAIN PARTS
Please, make sure if these parts are in the package.
Some of the parts may be pre-installed by the manufacturer.
Front wheel
Front fork
Rear storage basket
Steering rod
Fabric
cover
Handle II
Mud guard
Screw and cover
for steering bar
Connector
for handle
Steering
bar
Handle I
Canopy
Frame
Seat
Leg rest
Front storage
basket
Front
bumper
Rear
wheels
Head
support
Decorative
caps
Fasteners
(screws and nuts)
Seat
holder
3
NAME TYPE QUANTITY
Frame piece 1
Seat piece 1
Parent handle I piece 1
Parent handle II piece 1
Canopy piece 1
Front bumper piece 1
Fabric cover piece 1
Steering bar piece 1
Decorative caps piece 2
Front fork piece 1
Head rest piece 1
Steering rod piece 1
Front wheel piece 1
Rear wheel piece 2
Front storage basket piece 1
Rear storage basket piece 1
Leg rest piece 1
Screw and cover for steering bar piece 1
Connector for parent handle piece 1
Mud guard piece 1
Seat holder piece 1
Screws and nuts set 1
IMPORTANT! Follow exactly the instructions given and check the pictures.
IMPORTANT! AFTER EACH OPERATION, MAKE SURE THAT YOU HAVE FOLLOWED
THE INSTRUCTIONS CORRECTLY AND THE FIXING IS STABLE!
CAUTION! Make sure all
are tight but not overtighten them. If some parts are loose this could
cause disintegration of the tricycle and injury to your child.
ASSEMBLY INSTRUCTIONS
Needed tools: screwdriver and wrench (not included).
4
ASSEMBLY
1. ASSEMBLY OF REAR WHEELS
1-1 – Place the rear wheels onto rear axles.
1-2and1–3–Assembletherearaxlestothetubesoftheframeuntiltheyxandyouhearaclicksound
1-4 – Place the decorative caps on both rear wheels
2. ASSEMBLY OF FORK AND FRENOT WHEEL
2-2–Firstassemblethemudguardtotheforkandxitwiththescrew.Afterthatplacethewheeltothe
tubes of fork and press until you hear click and pins jump out of the openings.
Insert the tube of the fork through the opening at front frame.
2-1 – Put the handlebar through the front basket and to the fork tube.
2-2 – Fix it by moving the red lever up.
3. ASSEMBLY OF STEERING BAR
3-2 – Place the cover with screw on the steering bar and after that the front storage basket
3-3–Attachthesteeringbartotheforkwithpressureuntilyouhearclickanditxes.
Tighten the screw on the cover.
4. ASSEMBLY OF SEAT
4-2 – Attach the seat holder to the frame with screw and nut.
4-3 – Assemble the seat to the seat holder with screws and nuts.
5. ASSEMBLY OF FRONT BUMPER AND FABRIC COVER
5-2 – Place the front bumper onto the tubes of hear holder.
5-3 – Assemble the head rest to the tubes of seat holder with screws and nuts. Place the fabric cover
overtheseatandheadsupportasgureshows.
6. ASSEMBLY OF CANOPY
Place the tubes of the canopy to the corresponding holes of the head support. Fix with screws and nuts.
7. ASSEMBLY OF REAR STORAGE BASKET
Placetherearstoragebaskettotheframeandxwithscrewwithplastichead.
8. ASSEMBLY OF PARENT HANDLE
8-1–InserthandleIIfromdownsidethroughthereartubeoftheframeasgureshowsandplacethe
washer.
8-2–PlacetheconnectoronhandleIandxitwithscrewandnut.InserthandleIinhandleII.Fixwith
screw and nut and tighten with the red lever.
9. ASSEMBLY OF LEG REST
Press the pin and assemble the leg rest to the frame of tricycle until you hear click sound and leg rest
xes.
10. ASSEMBLY OF STEERING ROD
Insert one end of the steering rod into the fork and the other one – to the parent handle with screw and
nut.
5
1-1
2-1
3-1
4-1
5-1
6 7
5-2
5-3
4-2 4-3
3-2 3-3
2-2
1-2 1-3 1-4
rear wheels
front
wheel
frame
mudguard
fork
Steering bar
headrest
canopy
fabric
cover
screw
seat holder
front bumper
screw
nut
screw
nut
screw and cover
front
storage
basket
pin
pin
“click”
screw
cover
cover
rear
axles
6
FUNCTIONS
FOLDING (1) AND UNFOLDING (2)
OF CANOPY
FOLDING OF LEG REST TO THE FRAME
ATTENTION! When you push the tricycle the leg
rest must be unfolded and when child rides the
tricycle the leg rest must be folded to the frame.
8-1 8-2
9
10
handle II
seal
handle I
Leg rest
Steering rod
2 - folding
1 - unfolding
1
2
pin
folding
mechanism
openings for
steering rod
7
OPEN AND LOCK OF FRONT BUMPER
Press the button to open the front bumper.
USING THE TRICYCLE WITH PARENT CONTROL.
USING THE TRICYCLE BY THE CHILD
(AFTER YOU REMOVE THE CANOPY AND PARENT HANDLE).
MAINTENANCE GUIDELINES
Periodically check the good working order of the tricycle parts.
Do not wash the TOY and do not soak it in water. Use a soft damp cloth and water or neutral liquid
detergent.
Do not use aggressive detergents, containing abrasive particles, ammonia, bleach or spirits.
Regularly oil the moving parts.
Do not use on sand.
Do not store the TOY in hot environment, in order to avoid the plastic parts from deforming.
the TOY to dry out fully Store the TOY in clean and dry place indoors. Do not expose to direct
sunlight, moisture or harsh weather!
Always let before storing or using the TOY fully dry, in order to avoid mold and rust.
Contact your authorized dealer if consultation or repair is needed.
Materials used:plastic,metal,textileandtextilelling–100%polyester.
TRKPL021xххх / H01B-Y805
Button
Bulgaria, Plovdiv, Str. Golyamokonarsko shosse № 1
www.chipolino.com
/