Hampton Bay HB1521L4-07 Operating instructions

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. – 7 p.m., EST, Monday – Friday

9 a.m. – 6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

USE AND CARE GUIDE

____________________________________

LED CEILING FLUSH MOUNT

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this LED ceiling

flush mount. We strive to continually create quality products designed to enhance your home. Visit us online to see our

full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Item:

Model:

1002659188

HB1521L4-07

 Before starting installation of this fixture or

removal of a previous fixture, disconnect

the power by turning off the circuit breaker

or by removing the fuse at the fuse box.

 Consult a qualified electrician if you have

any electrical questions or need to replace

the driver.

 If you have any non-electrical questions

about this fixture, please contact our

Customer Service Team at

1‐855‐HD‐HAMPTON or

HAMPTONBAY.COM.

WARNING: Disconnect the power prior to

removing or installing a light fixture.

Table of Contents

Safety Information

Warranty

WHAT IS COVERED

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship

for a period of five (5) years from date of purchase. This warranty applies only to the original

consumer purchaser and only to products used in normal use and service. If this product is found to

be defective, the manufacturer‟s only obligation, and your exclusive remedy, is the repair or

replacement of the product at the manufacturer‟s discretion, provided that the product has not been

damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up,

or used in any way not in accordance with the instructions supplied with the product. This warranty

shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or

weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether expressed or

implied, of fitness for a particular purpose, other than the warranty contained herein. The

manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor/expense costs involved in the

replacement or repair of said product.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

2

Operation 7

Care and Cleaning 7

Exterior Maintenance 7

Interior Maintenance 7

Driver Replacement 8

Dimming 8

FCC Notice 8

Troubleshooting 9

Table of Contents 2

Safety Information 2

Warranty 2

Pre-Installation 3

Planning the Installation 3

Tools 3

Hardware 3

Package Contents 4

Installation 5

WARNING: Changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to

operate the equipment.

Pre-Installation

PLANNING THE INSTALLATION

Read all instructions before assembly and installation. Before starting installation of the fixture or

removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing

the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive

surface such as carpet or cardboard.

NOTE: Keep your receipt and these instructions

for Proof of Purchase.

TOOLS REQUIRED

HARDWARE REQUIRED

NOTE: Hardware not shown to actual size.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

3

Hammer

Ladder

Safety

Goggles

Electrical

Tape

Drill

1/4” Drill

Bit

Phillips

Screwdriver

Wire

Cutter

Wire

Stripper

Flathead

Screwdriver

Pencil

Part

Description

Quantity

AA

Wire Nut

3

BB

Anchor

4

CC

Anchor Screw

4

AA BB CC

Pre-Installation (continued)

PACKAGE CONTENTS

4

Part

Description

Quantity

A

Mounting Bracket

1

B

Fixture

1

A

B

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

1

Mounting the hardware

 Align the mounting bracket (A) over the

outlet box.

 Mark the location of the keyhole slots of

the mounting bracket (A) onto the ceiling.

Remove the mounting bracket (A) from the

ceiling.

 Drill a 1/4 in. (6.4 mm) hole at the narrow

end of each keyhole slot marking on the

ceiling.

 Carefully hammer an anchor (BB) into

each drilled hole.

 Screw an anchor screw (CC) into each

anchor (BB), but allow a small portion of

the anchor screw (CC) to remain away

from the ceiling.

2

Installation

5

BB

CC

A

 Place the mounting bracket (A) over the

outlet box and feed the anchor screws

(CC) through the keyhole slots.

 Slide the mounting bracket (A) so that the

anchor screws (CC) slide into the narrow

ends of the keyhole slots.

 Tighten the anchor screws (CC) so that

the mounting bracket (A) is secured flush

against the ceiling.

Securing the mounting bracket

A

CC

BB

A

CC

3

Securing the lanyards

 Unhook the lanyards located on the back

of the fixture (B) from each other.

 Hook a lanyard into a hole near the corner

of the mounting bracket (A).

 Hook the remaining lanyard into a hole on

the mounting bracket (A) diagonally across

from the first lanyard.

4

Connecting the wires

 Pull the power supply wires out from the

outlet box.

 Connect the black supply wire to the

black fixture wire using wire nuts (AA).

 Connect the white supply wire to the

white fixture wire using wire nuts (AA).

 Connect the fixture ground wire and the

supply ground wire together using a wire

nut (AA).

 Wrap all wire connections with electrical

tape for a more secure connection.

 Carefully tuck all the wires and wire

connections into the outlet box.

Installation (continued)

6

NOTE: If you have electrical questions consult

your local electrical code for approved

grounding methods.

B

AA

A

BB

B

A

BB

Lanyard

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

5

Securing the fixture

 Place the fixture (B) onto the mounting

bracket (A).

 Align the pins on the fixture (B) with the

slots on the mounting bracket (A).

 Slide the fixture (B) to secure it in place.

Installation (continued)

7

Operation

 Turn on power at the circuit breaker or fuse box.

 Turn the light switch on to activate the fixture.

Care and Cleaning

EXTERIOR MAINTENANCE

 Use a dry or slightly dampened clean

cloth and wipe the surface of the

fixture.

INTERIOR MAINTENANCE

 Disconnect power to the fixture by

turning off the circuit breaker or by

removing the fuse at the fuse box.

 Use a dry or slightly dampened clean

cloth to wipe the interior surface of the

fixture.

NOTE: Do not use any cleaners with chemicals,

solvents, or harsh abrasives. Use only a dry

soft cloth to dust or wipe carefully.

B

A

BB

Driver Replacement

This product is ENERGY STAR ® listed. Please contact a qualified electrician if driver replacement is

needed.

Dimming

Although this product is compatible with most common residential type dimmers, dimming

performance depends on dimmer, dimmer setting (for dimmers with brightness range adjustments),

wiring method, and the number of LED modules. For best results, set dimmer position at maximum

before adjusting to a lower light level.

For a complete list of compatible dimmers, please look up the item number listed on the cover of this

instruction manual at www.homedepot.com/.

FCC Notice

NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FBB Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. However, there is no guarantee

that interference can be determined by turning the equipment off and on. The user is encouraged to

try to correct the interface by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the device and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

8

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Troubleshooting

9

Problem

Solution

The light will not turn on.

 Make sure the power supply is on.

 Test or replace the switch.

 Check the wiring.

 Replace the driver.

The fuse blows or circuit breaker trips

when the light is turned on.

 Check the wire connections.

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. – 7 p.m., EST, Monday-Friday

9 a.m. – 6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

Retain this manual for future use.

Page is loading ...

Hampton Bay HB1521L4-07 Operating instructions

Hampton Bay HB1521L4-07 Operating instructions

in other languages

Related papers

Other documents