Savant SPK-SUR3STAND-00 Reference guide

SPK-SUR3STANDx-xx | 009-1906-01 1 of 1 45 Perseverance Way, Hyannis, MA 02601

Speaker Stand Assembly

1. Insert the stand pillar into the top of the speaker stand base.

2. Install the three base screws into the bottom of the stand using the

hex tool provided.

3. Install mounting feet or carpet spikes as the deployment requires.

Note: Adjust position of nuts on mounting feet or carpet spikes as

needed to keep stand level.

Smart Audio Surround Speakers Installation

4. Adjust position of nuts on mounting feet or carpet spikes as

needed to keep stand level.

5. Thread the power cord through the bottom of the stand, pull it

through the lower cable port, and attach to the speaker.

Note: If cord is not long enough, attach the included extender

before threading.

6. Plug the power cord into the 120/240V power input.

7. Adjust position of nuts on mounting feet or carpet spikes as

needed to keep stand level.

The WiSA logo, WiSA, WiSA Ready, and WiSA Certiﬁed are

trademarks, or certiﬁcation marks of WiSA LLC. Third-party trade

names, trademarks and product names are the intellectual property of

their respective owners.

Stand for Smart Audio Surround Speakers [SPK-SUR3STANDx-xx] Installation Guide

Box Contents

(2) Stand Assemblies (SPK-SUR3STANDx-xx) includes:

(2) Pillar Satellite Stand (093-3176x-xx)

(2) Base Satellite Stand (093-3164x-xx)

(4) Speaker Mounting Screws M4 x 20mm Hex Shoulder Bolt (039-0540-xx)

(6) Stand Assembly Screws M4 x 20mm Hex Button Head (039-0575-xx)

(8) Stand Mounting Feet (015-0297-xx)

(8) Speaker Carpet Spikes (015-0317-xx)

(8) Fastener Nuts M6 x 1mm (039-0574-xx)

(2) Power Cord Extenders (064-0517-xx)

(1) Hex Allen Key (015-0321-xx)

(1) 10mm Card Wrench to secure feet (015-0320-xx)

(1) SPK-SUR3STAND Installation Guide (This document, 009-1906-xx)