Eurotech Adbc8037 Owner's manual

Adbc8037
Eurotech
Brand
Eurotech
Model
Adbc8037
Type
Owner's manual

Eurotech Adbc8037 is a COM Express carrier board designed for industrial applications. It supports COM Express Type 6 modules and offers a range of features including PCI Express, USB 3.0, SATA, DisplayPort, and Gigabit Ethernet connectivity. The board also has an onboard CFast socket for solid-state storage. With its rugged construction and wide range of features, the Eurotech Adbc8037 is an ideal solution for demanding industrial applications.

Eurotech Adbc8037 is a COM Express carrier board designed for industrial applications. It supports COM Express Type 6 modules and offers a range of features including PCI Express, USB 3.0, SATA, DisplayPort, and Gigabit Ethernet connectivity. The board also has an onboard CFast socket for solid-state storage. With its rugged construction and wide range of features, the Eurotech Adbc8037 is an ideal solution for demanding industrial applications.

Adbc8037-CAR
COM Express Carrier Board
USER MANUAL
First edition – June 2014 – B31058B1-MN002-00_UserMan_En_1
© 2014 Eurotech
Preface
Thank you for choosing the Adbc8037-CAR. Please read this manual before using the Adbc8037-CAR so that
you may obtain the greatest benefit from using the device.
This manual presents the specifications, functions, and method of use of the Adbc8037-CAR.
Eurotech has made every effort to carefully inspect each product and has taken great care to package and to
ship the product. In the unlikely event of the product’s failure to operate normally due to problems in shipping or
otherwise, the company will repair or replace the product at its own responsibility.
If you have any questions, contact your local Eurotech Sales Office.
Trademarks
All trademarks both marked and not marked appearing in this document are the property of their respective
owners.
This document does not give permission to the implementation of patents or other rights held by Eurotech or third
parties.
Revision history
Revision
Description
Date
1
First release
20 June 2014
Adbc8037-CAR USER MANUAL Table of contents
3
B31058B1-MN002-00_UserMan_En_1
Table of contents
Preface ........................................................................................................................................................................ 2
Trademarks .................................................................................................................................................................. 2
Revision history ........................................................................................................................................................... 2
Table of contents .......................................................................................................................................................... 3
1. Important User Information ...................................................................................................................................... 5
1.1 Safety Notices and Warnings ................................................................................................................................ 5
1.2 Life Support Policy ................................................................................................................................................. 7
1.3 Warranty ................................................................................................................................................................ 7
1.4 RoHS ..................................................................................................................................................................... 7
1.5 Technical Assistance ............................................................................................................................................. 7
1.6 Conventions ........................................................................................................................................................... 7
1.7 Electromagnetic Compatibility ............................................................................................................................... 7
2. Summary .................................................................................................................................................................... 9
2.1 Features ................................................................................................................................................................. 9
2.2. Block Diagram .................................................................................................................................................... 10
3. Hardware Specifications ........................................................................................................................................ 11
4. Mechanical Specifications ..................................................................................................................................... 12
4.1 External Dimention .............................................................................................................................................. 12
4.2 Method of installation/removal ............................................................................................................................. 13
5. System Specification .............................................................................................................................................. 14
5.1 Power Supply....................................................................................................................................................... 14
5.2 Environmental ...................................................................................................................................................... 14
6. Onboard Component .............................................................................................................................................. 15
6.1 Component Layout .............................................................................................................................................. 15
6.2 Indicator ............................................................................................................................................................... 17
6.2.1 LED1,2 ........................................................................................................................................................ 17
6.2.2 LED8,9,11,14 .............................................................................................................................................. 17
6.2.3 LED7 ........................................................................................................................................................... 17
6.3 Switches .............................................................................................................................................................. 17
6.3.1 SW1: Reset Switch ..................................................................................................................................... 17
6.3.2 SW2: Power Button ..................................................................................................................................... 17
6.4 Other .................................................................................................................................................................... 18
6.4.1 CN6: CFast ................................................................................................................................................. 18
6.5 PIN Layout ........................................................................................................................................................... 19
6.5.1 CN11: COM Express stacking connector ................................................................................................... 19
6.5.2 CN20: Ethernet connector .......................................................................................................................... 21
6.5.3 CN12: USB3.0 connector ............................................................................................................................ 21
6.5.4 CN3: USB2.0 connector .............................................................................................................................. 22
6.5.5 CN13,300,301: DisplayPort connector........................................................................................................ 22
6.5.6 CN15,16,18: SATA connector ..................................................................................................................... 23
6.5.7 CN6: CFast connector................................................................................................................................. 23
6.5.8 CN2,4: PCI Express slot ............................................................................................................................. 24
6.5.9 CN14: PCI Express slot .............................................................................................................................. 25
6.5.10 CN10: PCI Express slot ............................................................................................................................ 26
6.5.11 CN23: Analog VGA connector .................................................................................................................. 27
6.5.12 CN21,302: RS-232C D-Sub connector ..................................................................................................... 27
6.5.13 JP4: LED connector (for case) .................................................................................................................. 28
Table of contents Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
6.5.14 JP6: GPIO connector ................................................................................................................................ 28
6.5.15 CN18: ATX power connector (24pin) ........................................................................................................ 29
6.5.16 CN19: ATX power connector (4pin) .......................................................................................................... 29
6.5.17 CN7,9: FAN power connector ................................................................................................................... 30
Notes ............................................................................................................................................................................ 31
Adbc8037-CAR USER MANUAL Important User Information
5
B31058B1-MN002-00_UserMan_En_1
1. Important User Information
In order to lower the risk of personal injury, electric shock, fire, or equipment damage, users must observe the
following precautions as well as good technical judgment, whenever this product is installed or used.
All reasonable efforts have been made to ensure the accuracy of this document; however, Eurotech assumes
no liability resulting from any error/omission in this document or from the use of the information contained herein.
Eurotech reserves the right to revise this document and to change its contents at any time without obligation to
notify any person of such revision or changes. Reproduction of all or part of this document without Eurotech’s
permission is prohibited.
1.1 Safety Notices and Warnings
The following general safety precautions must be observed during all phases of operation, service, and repair of
this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of the equipment. Eurotech assumes no
liability for the customer’s failure to comply with these requirements.
The safety precautions listed below represent warnings of certain dangers of which Eurotech is aware. You, as
the user of the product, should follow these warnings and all other safety precautions necessary for the safe
operation of the equipment in your operating environment.
Alerts that can be found throughout this manual
The following alerts are used within this manual and indicate potentially dangerous situations.
Danger, electrical shock hazard:
Information regarding potential electrical shock hazards:
Personal injury or death could occur. Also damage to the system, connected peripheral
devices, or software could occur if the warnings are not carefully followed.
Appropriate safety precautions should always be used, these should meet the
requirements set out for the environment that the equipment will be deployed in.
Warning:
Information regarding potential hazards:
Personal injury or death could occur. Also damage to the system, connected peripheral
devices, or software could occur if the warnings are not carefully followed.
Appropriate safety precautions should always be used, these should meet the
requirements set out for the environment that the equipment will be deployed in.
Information and/or Notes:
These will highlight important features or instructions that should be observed.
Protect the device from vibration and impact
Do not place the product in a location where it can fall or can be subject to vibration or impact because this may
cause device failure.
Do not modify the device
For safety reasons, under no circumstances should you modify the device. Eurotech will not repair products
that have been modified.
Important User Information Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
Protect the product from water and chemicals
Contact between the product and water or chemicals can result in product failure, electrocution, or fire.
Protect the product from foreign material
Make sure that foreign material does not get into the product during use, storage, or transport because this can
result in product failure.
Use precautions in handling to ensure that you are not injured
The sharp projections on this product may cause injury. Take care in handling this product in order to avoid
injury.
Do not disassemble the product
In order to maintain guaranteed product performance, do not disassemble this product under any circumstances.
Keep the product away from radios and TVs
Do not use the product near radios, television sets, or other devices generating strong magnetic or electrical
fields. This could result in failure or malfunction.
Keep the product away from flame, humidity, and direct sunlight
Do not use or store the product in any of the following locations, as this could result in product failure:
Places where there is fire
Locations high in humidity or exposed to rain
Locations exposed to direct sunlight
Dusty or dirty locations
Locations containing excessive water or chemical vapors
Install the product in well-ventilated locations
Install the product in well-ventilated locations to efficiently disperse heat generated by the product.
Remove the power plug from the receptacle when not using the product
Turn off the main switch and remove the power plug from the receptacle when not using the product or when
there is the risk of lightning strike.
Use the device within rated parameters
Be sure to use the product within the ratings specified in this manual. Failure to do so may result in malfunction.
Use care when cleaning the product
If the product becomes dirty, wipe it with a dry soft cloth. A thinned neutral cleaner may be used if the product is
particularly dirty. Do not use benzene, thinners, or other solvents under any circumstances.
Ground the product in order to prevent electrocution
Be sure to ground the product by connecting it to a 3-pole AC receptacle or by using an AC receptacle having a
grounding terminal.
Dispose of the product properly
Use appropriate methods for handling industrial wastes when disposing of this product.
Wire the product correctly
Failure to wire the product correctly can result in malfunction or fire. Read this manual and wire the product
correctly.
Adbc8037-CAR USER MANUAL Important User Information
7
B31058B1-MN002-00_UserMan_En_1
Use antistatic precautions
This product comprises electronic parts that are highly susceptible to static electricity. Static electricity can
cause the product to malfunction. Take care not to touch any of the terminals, connectors, ICs, or other parts
with the hands.
Do not use a malfunctioning product
Stop using the product if you believe it is malfunctioning. Continuing to use a malfunctioning product can cause
the malfunction to spread to other products and can cause short circuits or fire.
1.2 Life Support Policy
Eurotech products are not authorized for use as critical components in life support devices or systems without
the express written approval of Eurotech.
1.3 Warranty
For warranty terms and conditions users should contact their local Eurotech Sales Office.
Refer to the back covers of this manual for full contact details.
1.4 RoHS
This device, including all its components, subassemblies and the consumable materials that are an integral part
of the product, has been manufactured in compliance with the European directive 2011/65/EU known as the
RoHS directive (Restrictions on the use of certain Hazardous Substances). This directive targets the reduction
of certain hazardous substances previously used in electrical and electronic equipment (EEE).
1.5 Technical Assistance
If you have any technical questions, cannot isolate a problem with your device, or have any enquiry about repair
and returns policies, contact your local Eurotech Technical Support Team.
See the back cover for full contact details.
Transportation
When transporting any module or system, for any reason, it should be packed using anti-static material and
placed in a sturdy box with enough packing material to adequately cushion it.
Warning:
Any product returned to Eurotech that is damaged due to inappropriate packaging will not be covered by the
warranty.
1.6 Conventions
The following table describes the conventions for signal names used in this document.
1.7 Electromagnetic Compatibility
This product is intended for industrial assembly only and is not for commercial use. Therefore, this product is not
an apparatus and so does not need to be subject to the EMC Directive.
Convention
Explanation
GND
Digital ground plane
#
Active low signal
+
Positive signal in differential pair
-
Negative signal in differential pair
NC
No connection
RSVD
Use is reserved to Eurotech
Adbc8037-CAR USER MANUAL Summary
9
B31058B1-MN002-00_UserMan_En_1
2. Summary
The Adbc8037-CAR is a carrier board for evaluating the Adbc8037 (COM Express CPU Module).
Connected to the Adbc8037 with a stacking connector, this board supplies to the Adbc8037 and interfaces the
rich functions of Adbc8037 with external environment.
The board size is microATX (244mm×244mm). The board is equipped with two ATX power connectors of 24-pin
and 4-pin for power supply.
2.1 Features
The Adbc8037-CAR has the following features:
Embedded board for industrial equipment application
USB2.0 connector ×2
USB3.0 connector ×2
16 lane PCI Express Slot ×1
4 lane PCI Express Slot ×1
1lane PCI Express Slot ×2
analog VGA connector ×1
Display Port connector ×3
SATA connector ×3
CFast connector ×1
SIO(D-sub 9-pin) connector ×2
LAN(RJ-45) connector ×1
I
2
C serial EEPROM ×1
SMBus serial EEPROM ×1
cooling fan
accessories
o PAN-SCREW(M2.5x6mm) ×5
o PAN-SCREW(M2x6mm) ×1
o RASIN-SPACER(M2x5) ×1
RoHS compliant (2011/65/EU)
Summary Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
2.2. Block Diagram
Figure 1. Block Diagram
CPLD
GbE
connector
X16
X4
X1
X1
COM Express
Connector
PCIe
PCIe
PCIe
DisplayPort
DisplayPort
DisplayPort
VGA
SATA
SATA
SATA
SATA
USB2.0
USB2.0
USB3.0
USB3.0
LAN(GbE)
I
2
C
SMBus
LPC
USB2.0
USB2.0
4
4
4
X4
X4
X4
PCIe
DisplayPort
DisplayPort
DisplayPort
VGA
USB2.0
connector
USB2.0
connector
USB3.0
connector
USB3.0
connector
SATA
connector
SATA
connector
SATA
connector
CFast
connector
PCIe slot
(X4)
PCIe slot
(X1)
PCIe slot
(X1)
PCIe slot
(X16)
SuperIO
SIO
connector
SIO
connector
7seg-LED
(POST)
EEPROM
EEPROM
GPIO
Jumper
Post
PWRBTN#
Power
Switch
SYS_RESET#
Reset
Switch
Adbc8037-CAR USER MANUAL Hardware Specifications
11
B31058B1-MN002-00_UserMan_En_1
3. Hardware Specifications
Table 1. Specifications List
Item
Discription
Rear I/O Area
I/F
Ethernet
1 port, 10/100/1000Base-T
RJ-45(with Link LED and Activity LED)
Link LED：yellow(1000Base-T)/green(100Base-TX)
Activity LED：green
USB3.0
2 ports, TypeA
DisplayPort
3 ports
VGA
1 port
Onboard
I/F
PCIe(X16)
1 port
PCIe(X4)
1 port
PCIe(X1)
2 ports
CFast
1 port
GPIO
GPI0 to 3 / GPO0 to 3
USB2.0
2 ports, TypeA
SIO
2 ports, SuperIO (Microchip : LPC47M107S-MS) connected to the LPC bus.
max:115200bps
Switches
Reset switch
Assert the SYS_RESET# signal to the CPU module
Power switch
Assert the PWRBTN# signal to the CPU module
(with Power LED, green：Power-on, red：reset signal assarted)
Other
I
2
C EEPROM
2kbit
SMBus EEPROM
2kbit
Battery holder
CR2032 implemented (factory default)
LED
POST code, power status
FAN
wind velocity:max5m/s
FAN power connector
2 ports
ATX power connector(24-pin)
1 port
ATX power connector(4-pin)
1 port
Mechanical Specifications Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
4. Mechanical Specifications
Table 2. Mechanical
Item
Discription
Form Factor
microATX
Board Size
244mm×244mm(9.6inch x 9.6inch)
PCB thickness
1.6mm
Weigth
475g(board + fan + battery)
4.1 External Dimention
unit : mm
Figure 2. External Dimention
243.84
34.29
45.72
157.48
33.02
132.08
72.39
243.84
10.16
13.97
Adbc8037-CAR USER MANUAL Mechanical Specifications
13
B31058B1-MN002-00_UserMan_En_1
4.2 Method of installation/removal
The following diagram illustrates removal the mounting of the Adbc8037 to the Adbc8037-CAR.
Please handle the board with ESD measures such as wearing an antistatic bracelet so as not to damage the
device by static electricity.
Figure 3. Installation/Removal of Adbc8037 and Adbc8037-CAR
Installation Procedure
Use the following procedure to install the Adbc8037 onto the Adbc8037-CAR
1. Turn off the power.
2. Make the Adbc8037 matched with the 440pin-connector pair and five spacer securing holes in the Adbc8037-
CAR, and push the Adbc8037 into the Adbc8037-CAR(refer to Figure 3). Make sure the Adbc8037-CAR
connector is properly braced from behind to keep it straight and to insure a good fit between connectors. After
the connectors have been connected completely, make sure that there are no clearances between all the
stacking connectors and the Adbc8037-CAR.
3. Attach the supplied M2.5 x 5mm SEMS screws(5 pcs.) to the Adbc8037-CAR from behind.
Removal Procedure
Use the following procedure to remove the Adbc8037 from the Adbc8037-CAR
1. Turn off the power.
2. Remove the five screws located on the rear of the carrier board that are securing the Adbc8037.
3. Disconnect the Adbc8037 from the Adbc8037-CAR, lifting it upward in a horizontal position.
Adbc8037-CAR
System Specification Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
5. System Specification
5.1 Power Supply
Table 3. Power Supply
Item
Symbol
Min
Typ.
Max
Unit
Supply voltage
VCC_12V
11.4
12
12.6
V
VCC_5V_SBY
4.75
5
5.25
V
VCC_RTC
2.0
3
3.3
V
5.2 Environmental
Table 4. Environmental
Item
Min
Max
Unit
Operating temperature
0
60
℃
Operating humidity, non-condensing
35
80
%
Storage temperature
-10
70
℃
Storage humidity, non-condensing
90
%
Adbc8037-CAR USER MANUAL Onboard Component
15
B31058B1-MN002-00_UserMan_En_1
6. Onboard Component
6.1 Component Layout
Figure 4. Component Layout
CN23
CN13
CN300
CN301
CN12
CN20
CN4
CN2
CN14
CN10
CN15
CN16
JP5
JP6
JP4
CN21
CN19
CN6
CN9
CN7
CN5
CN8
CN1
CN302
CN3
CN18
LED5
LED7
LED10
LED3
LED8
LED9
LED11
LED14
LED1
LED2
SW2
SW1
JP1
BT1
CPU Module
FAN
CN11
LED12
Onboard Component Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
Referens
Description
Comment
CN11
COM Express(Type6)
CN20
LAN
CN12(Upper)
USB3.0_1 & USB2.0_1
CN12(Lower)
USB3.0_0 & USB2.0_0
CN3(Upper)
USB2.0_2
CN3(Lower)
USB2.0_3
CN13
DisplayPort1 (DDI1)
CN300
DisplayPort2 (DDI2)
CN301
DisplayPort3 (DDI3)
CN23
VGA
CN18
SATA0
CN16
SATA1
CN15
SATA2
CN6
CFast(SATA3)
CN10
16 lane PCI Express Slot
CN14
4 lane PCI Express Slot
CN2
1 lane PCI Express Slot
CN4
1 lane PCI Express Slot
CN1
COM0
CN302
COM1
CN21
SPI Flash write connector
Not used(used during shipment inspection)
CN19
CPLD write connector
Not used(used during shipment inspection)
SW1
Reset Switch
refer to 6.3.1 SW1: Reset Switch page 17
SW2
Power Button
refer to 6.3.2 SW2: Power Button page17
JP1
For Case Power Button
JP4
For Case Power LED
JP5
BIOS_DISABLE# signal
Not used(used during shipment inspection)
JP6
GPIO
LED1
7 Segment LED
refer to 6.2.1 LED1,2 page 17
LED2
7 Segment LED
LED5
THRMTRIP#
Not used(used during shipment inspection)
LED7
ATA-ACT#
refer to 6.2.3 LED7 page 17
LED10
SATA-PHY
Not used(used during shipment inspection)
LED3
SATA-ACT
Not used(used during shipment inspection)
LED8
SUS-STAT#
refer to 6.2.2 LED8,9,11,14 page 17
LED9
SUS-S3#
LED11
SUS-S4#
LED14
SUS-S5#
LED12
SPKR
Not used(used during shipment inspection)
BT1
Battery holder
CN7
FAN power connector
CN9
FAN power connector
Used Onboard fan
CN5
ATX power connector(24-pin)
CN8
ATX power connector(4-pin)
Adbc8037-CAR USER MANUAL Onboard Component
17
B31058B1-MN002-00_UserMan_En_1
6.2 Indicator
6.2.1 LED1,2
LED1 and 2 indicate POST code.
6.2.2 LED8,9,11,14
These LED lights when each signal from SUS_S3# through SUS_S5# and SUS_STAT# from the CPU module
turns into “Low”.
Table 5. Reference fo SUS_xx signals
LED
Signal
LED8
SUS_STAT#
LED9
SUS_S3#
LED11
SUS_S4#
LED14
SUS_S5#
6.2.3 LED7
This LED lights when ATA_ACT# from the CPU module turns into “Low”.
6.3 Switches
6.3.1 SW1: Reset Switch
During this switch is pressed , the SYS_RESET# signal to the CPU module is asserted at “Low”.
6.3.2 SW2: Power Button
During this switch is pressed , the PWRBTN# signal to the CPU module is asserted at “Low”.
LED2
LED1
Onboard Component Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
6.4 Other
6.4.1 CN6: CFast
In order to prevent the falling off of CFast, the supplied screw and spacer can be used. After inserting CFast in
the connector, please fix a spacer as shown in the following.
Adbc8037-CAR USER MANUAL Onboard Component
19
B31058B1-MN002-00_UserMan_En_1
6.5 PIN Layout
6.5.1 CN11: COM Express stacking connector
CN11 is stacking connector for mounting a Adbc8037 CPU module. The connector is Tyco Electronics’s model
3-5353652-6 or equivalent. The following table describes pin assignment.
Table 6. COM Express connector
RowA
RowB
RowC
RowD
Pin
Signal
Pin
Signal
Pin
Signal
Pin
Signal
A1
GND
B1
GND
C1
GND
D1
GND
A2
GBE0_MDI3-
B2
NC
C2
GND
D2
GND
A3
GBE0_MDI3+
B3
LPC_FRAME#
C3
USB_SSRX0-
D3
USB_SSTX0-
A4
GBE0_LINK100#
B4
LPC_AD0
C4
USB_SSRX0+
D4
USB_SSTX0+
A5
GBE0_LINK1000#
B5
LPC_AD1
C5
GND
D5
GND
A6
GBE0_MDI2-
B6
LPC_AD2
C6
USB_SSRX1-
D6
USB_SSTX1-
A7
GBE0_MDI2+
B7
LPC_AD3
C7
USB_SSRX1+
D7
USB_SSTX1+
A8
GBE0_LINK#
B8
LPC_DRQ0#
C8
GND
D8
GND
A9
GBE0_MDI1-
B9
NC
C9
NC
D9
NC
A10
GBE0_MDI1+
B10
LPC_CLK
C10
NC
D10
NC
A11
GND
B11
GND
C11
GND
D11
GND
A12
GBE0_MDI0-
B12
PWRBTN#
C12
NC
D12
NC
A13
GBE0_MDI0+
B13
SMB_CK
C13
NC
D13
NC
A14
GBE0_CTREF
B14
SMB_DAT
C14
GND
D14
GND
A15
SUS_S3#
B15
NC
C15
NC
D15
DDI1_CTRLCLK_AUX+
A16
SATA0_TX+
B16
SATA1_TX+
C16
NC
D16
DDI1_CTRLCLK_AUX-
A17
SATA0_TX-
B17
SATA1_TX-
C17
NC
D17
NC
A18
SUS_S4#
B18
SUS_STAT#
C18
NC
D18
NC
A19
SATA0_RX+
B19
SATA1_RX+
C19
NC
D19
NC
A20
SATA0_RX-
B20
SATA1_RX-
C20
NC
D20
NC
A21
GND
B21
GND
C21
GND
D21
GND
A22
SATA2_TX+
B22
SATA3_TX+
C22
NC
D22
NC
A23
SATA2_TX-
B23
SATA3_TX-
C23
NC
D23
NC
A24
SUS_S5#
B24
PWR_OK
C24
DDI1_HDP
D24
NC
A25
SATA2_RX+
B25
SATA3_RX+
C25
NC
D25
NC
A26
SATA2_RX-
B26
SATA3_RX-
C26
NC
D26
DDI1_PAIR0+
A27
BATLOW#
B27
NC
C27
NC
D27
DDI1_PAIR0-
A28
ATA_ACT#
B28
NC
C28
NC
D28
NC
A29
NC
B29
NC
C29
NC
D29
DDI1_PAIR1+
A30
NC
B30
NC
C30
NC
D30
DDI1_PAIR1-
A31
GND
B31
GND
C31
GND
D31
GND
A32
NC
B32
SPKR
C32
DDI2_CTRLCLK_AUX+
D32
DDI1_PAIR2+
A33
NC
B33
I
2
C_CK
C33
DDI2_CTRLCLK_AUX-
D33
DDI1_PAIR2-
A34
(
*
7)
BIOS_DISABLE#
B34
I
2
C_DAT
C34
DDI2_DDC_AUX_SEL
D34
DDI1_DDC_AUX_SEL
A35
THRMTRIP#
B35
THRM#
C35
NC
D35
NC
A36
NC
B36
NC
C36
DDI3_CTRLCLK_AUX+
D36
DDI1_PAIR3+
A37
NC
B37
NC
C37
DDI3_CTRLCLK_AUX-
D37
DDI1_PAIR3-
A38
NC
B38
NC
C38
DDI3_DDC_AUX_SEL
D38
NC
A39
NC
B39
NC
C39
DDI3_PAIR0+
D39
DDI2_PAIR0+
A40
NC
B40
NC
C40
DDI3_PAIR0-
D40
DDI2_PAIR0-
A41
GND
B41
GND
C41
GND
D41
GND
A42
USB2-
B42
USB3-
C42
DDI3_PAIR1+
D42
DDI2_PAIR1+
A43
USB2+
B43
USB3+
C43
DDI3_PAIR1-
D43
DDI2_PAIR1-
A44
USB_2_3_OC#
B44
USB_0_1_OC#
C44
DDI3_HPD
D44
DDI2_HPD
A45
USB0-
B45
USB1-
C45
NC
D45
NC
A46
USB0+
B46
USB1+
C46
DDI3_PAIR2+
D46
DDI2_PAIR2+
A47
VCC_RTC
B47
NC
C47
DDI3_PAIR2-
D47
DDI2_PAIR2-
A48
NC
B48
NC
C48
NC
D48
NC
A49
NC
B49
SYS_RESET#
C49
DDI3_PAIR3+
D49
DDI2_PAIR3+
A50
LPC_SERIRQ
B50
CB_RESET#
C50
DDI3_PAIR3-
D50
DDI2_PAIR3-
Onboard Component Adbc8037-CAR USER MANUAL
B31058B1-MN002-00_UserMan_En_1
RowA
RowB
RowC
RowD
Pin
Signal
Pin
Signal
Pin
Signal
Pin
Signal
A51
GND
B51
GND
C51
GND
D51
GND
A52
PCIE_TX5+
B52
PCIE_RX5+
C52
PEG_RX0+
D52
PEG_TX0+
A53
PCIE_TX5-
B53
PCIE_RX5-
C53
PEG_RX0-
D53
PEG_TX0-
A54
GPI0
B54
GPO1
C54
Type0#
D54
NC
A55
PCIE_TX4+
B55
PCIE_RX4+
C55
PEG_RX1+
D55
PEG_TX1+
A56
PCIE_TX4-
B56
PCIE_RX4-
C56
PEG_RX1-
D56
PEG_TX1-
A57
GND
B57
GPO2
C57
Type1#
D57
Type2#
A58
PCIE_TX3+
B58
PCIE_RX3+
C58
PEG_RX2+
D58
PEG_TX2+
A59
PCIE_TX3-
B59
PCIE_RX3-
C59
PEG_RX2-
D59
PEG_TX2-
A60
GND
B60
GND
C60
GND
D60
GND
A61
PCIE_TX2+
B61
PCIE_RX2+
C61
PEG_RX3+
D61
PEG_TX3+
A62
PCIE_TX2-
B62
PCIE_RX2-
C62
PEG_RX3-
D62
PEG_TX3-
A63
GPI1
B63
GPO3
C63
NC
D63
NC
A64
PCIE_TX1+
B64
PCIE_RX1+
C64
NC
D64
NC
A65
PCIE_TX1-
B65
PCIE_RX1-
C65
PEG_RX4+
D65
PEG_TX4+
A66
GND
B66
WAKE0#
C66
PEG_RX4-
D66
PEG_TX4-
A67
GPI2
B67
NC
C67
NC
D67
GND
A68
PCIE_TX0+
B68
PCIE_RX0+
C68
PEG_RX5+
D68
PEG_TX5+
A69
PCIE_TX0-
B69
PCIE_RX0-
C69
PEG_RX5-
D69
PEG_TX5-
A70
GND
B70
GND
C70
GND
D70
GND
A71
NC
B71
NC
C71
PEG_RX6+
D71
PEG_TX6+
A72
NC
B72
NC
C72
PEG_RX6-
D72
PEG_TX6-
A73
NC
B73
NC
C73
GND
D73
GND
A74
NC
B74
NC
C74
PEG_RX7+
D74
PEG_TX7+
A75
NC
B75
NC
C75
PEG_RX7-
D75
PEG_TX7-
A76
NC
B76
NC
C76
GND
D76
GND
A77
NC
B77
NC
C77
NC
D77
NC
A78
NC
B78
NC
C78
PEG_RX8+
D78
PEG_TX8+
A79
NC
B79
NC
C79
PEG_RX8-
D79
PEG_TX8-
A80
GND
B80
GND
C80
GND
D80
GND
A81
NC
B81
NC
C81
PEG_RX9+
D81
PEG_TX9+
A82
NC
B82
NC
C82
PEG_RX9-
D82
PEG_TX9-
A83
NC
B83
NC
C83
NC
D83
NC
A84
NC
B84
VCC_5V_SBY
C84
GND
D84
GND
A85
GPI3
B85
VCC_5V_SBY
C85
PEG_RX10+
D85
PEG_TX10+
A86
NC
B86
VCC_5V_SBY
C86
PEG_RX10-
D86
PEG_TX10-
A87
NC
B87
VCC_5V_SBY
C87
GND
D87
GND
A88
PCIE_CK_REF+
B88
NC
C88
PEG_RX11+
D88
PEG_TX11+
A89
PCIE_CK_REF-
B89
VGA_RED
C89
PEG_RX11-
D89
PEG_TX11-
A90
GND
B90
GND
C90
GND
D90
GND
A91
SPI_POWER
B91
VGA_GRN
C91
PEG_RX12+
D91
PEG_TX12+
A92
SPI_MISO
B92
VGA_BLU
C92
PEG_RX12-
D92
PEG_TX12-
A93
GPO0
B93
VGA_HSYNC
C93
GND
D93
GND
A94
SPI_CLK
B94
VGA_VSYNC
C94
PEG_RX13+
D94
PEG_TX13+
A95
SPI_MOSI
B95
VGA_I
2
C_CK
C95
PEG_RX13-
D95
PEG_TX13-
A96
GND
B96
VGA_I
2
C_DAT
C96
GND
D96
GND
A97
NC
B97
SPI_CS#
C97
NC
D97
NC
A98
NC
B98
NC
C98
PEG_RX14+
D98
PEG_TX14+
A99
NC
B99
NC
C99
PEG_RX14-
D99
PEG_TX14-
A100
GND
B100
GND
C100
GND
D100
GND
A101
NC
B101
NC
C101
PEG_RX15+
D101
PEG_TX15+
A102
NC
B102
NC
C102
PEG_RX15-
D102
PEG_TX15-
A103
NC
B103
NC
C103
GND
D103
GND
A104
VCC_12V
B104
VCC_12V
C104
VCC_12V
D104
VCC_12V
A105
VCC_12V
B105
VCC_12V
C105
VCC_12V
D105
VCC_12V
A106
VCC_12V
B106
VCC_12V
C106
VCC_12V
D106
VCC_12V
A107
VCC_12V
B107
VCC_12V
C107
VCC_12V
D107
VCC_12V
A108
VCC_12V
B108
VCC_12V
C108
VCC_12V
D108
VCC_12V
A109
VCC_12V
B109
VCC_12V
C109
VCC_12V
D109
VCC_12V
A110
GND
B110
GND
C110
GND
D110
GND
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Eurotech Adbc8037 Owner's manual

Adbc8037
Eurotech
Brand
Eurotech
Model
Adbc8037
Type
Owner's manual

Eurotech Adbc8037 is a COM Express carrier board designed for industrial applications. It supports COM Express Type 6 modules and offers a range of features including PCI Express, USB 3.0, SATA, DisplayPort, and Gigabit Ethernet connectivity. The board also has an onboard CFast socket for solid-state storage. With its rugged construction and wide range of features, the Eurotech Adbc8037 is an ideal solution for demanding industrial applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents