UniTherm HH User manual

Hello! I am an AI chatbot trained to assist you with the UniTherm HH User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

HOW TO INSTALL: HEATER HAT

This instructional guide will walk you through how to install the Heater Hat onto your Patio Heater.

Tools Needed:

• Power Drill

• Phillips Bit

• Four (4) 1” Self-Tapping Screws (Provided)

• Four (4) 1” Stainless steel Fender Washers (Provided)

Step 1:

Center the Heater Hat over the hood of the heater.

Step 2:

Insert the self-tapping screw through the washer hole.

Step 3:

Place the screw and washer combo over the predetermined holes on the Heater

Hat.

Step 4:

Using the power drill, drill the screws to a snug t, on the hood of the heater.

Self-Tapping Screws,

& Stainless Steel

Fender Washers

Power Drill and Phillips

Bit

/

Other documents