HOME basics CDHD_LA2372-21 Installation guide

CDHD_LA2372-21
HOME basics
Brand
HOME basics
Model
CDHD_LA2372-21
Type
Installation guide
add 3” overlap
Blinds & Shades
Measuring Guidelines
Inside Mount
Blinds/Shades are mounted inside the window casing/frame.
Use a metal measuring tape (cloth tapes may stretch).
Measure the inside
width of the window
opening in 3 places;
top, middle and
bottom. (Fig A)
Record the widest
measurement.
Fig A
Measure the inside
height of the window
opening in 3 places; let,
middle and right. (Fig
B)
Record the longest
measurement.
Fig B
*Note:
Measure exactly to the nearest 1/16 in., do not make any deductions or allowances.
Use these recorded measurements to select the appropriate blinds/shades for your window opening.
Do not order blinds/shades shorter than your window opening.
Outside Mount
Blinds/Shades are mounted outside the window casing/frame.
Use a metal measuring tape (cloth tapes may stretch).
Measure the exact
width of the entire
area to be covered.
For added light control
and privacy, suggest to
add 1 ½ " on each side.
Measure the exact
height of the entire
area to be covered.
For added light control
and privacy, suggest to
add 1 ½" to the height.
*Note:
Measure exactly to the nearest 1/16 in., do not make any deductions or allowances.
Select the width and height closest to the area you want to cover.
Do not order blinds/shades less than the area you want to be covered.
For better light and privacy control, approximately 3" for overall width and 3” for overall height.
1 1/2”
  • Page 1 1

HOME basics CDHD_LA2372-21 Installation guide

CDHD_LA2372-21
HOME basics
Brand
HOME basics
Model
CDHD_LA2372-21
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents