Delfield Shelleysteel SLT4-R Specification

Type
Specification

This manual is also suitable for

PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Short Form Specifications
Exterior Body is constructed of 20-gauge stainless steel. Stress points are
internally reinforced.
Exterior Top is constructed of 16-gauge stainless steel welded, ground and
polished into one integral unit. Top has square exterior corners.
Top has (4) electrically heated, recessed, die stamped stainless steel hot food
warmers. Food warmers are fully insulated on all sides and bottom with (1”
(2.54cm) of fiberglass matting and each is covered with a galvanized steel
jacket. Each food warmer has (1) heating element, rated at 1000 watts for
208 volt electrical service and wired to an individually adjustable temperature
control indicator light in the control panel. Food warmers are wired together to
an ON/OFF switch in the control panel. Each food warmer accommodates (1)
12.75” x 20.75” x 6” deep pan (32.4cm x 52.7cm x 15.2). Pans are provided
by others. NOTE: Drains are optional.
Control Panel is die-stamped stainless steel and is installed on the exterior at
the inner corner of the “L”.
Electrical connection is 208-230 volts, 60 Hertz, single phase. Unit has 10’
(2.7m) long cord and NEMA 6-30P plug.
Unit is mounted on 6” (15.2cm) flanged stainless steel feet.
NOTE: Model SLT4-L has the “L” corner on the left hand side of the server;
model SLT4-R has the “L” corner on the right hand side of the server.
Optional Accessories and Modifications
Q) *115/208 volt, 15 amp electrical outlet with 10 amp breaker
J) 12” (30.5cm) wide stainless steel overshelf
E) Stainless steel fold-down work shelf
QQ) Drains plumed to a common valve
* Inclusion of this option will alter
electrical specifications of the unit.
Model SLT4
TrimLine L-Shaped Heated Tray Make-Up Serving Counters
SLT4
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
SSSLT4 02/02
Mechanical Data–Standard Unit
MODEL PAN VOLTS/HERTZ/ AMPS AMPS NEMA SHIP
NUMBER CAPACITY PHASE @ 208V @ 230V PLUG WEIGHT
SLT4-L
4 120/208-230/60/1 20.0 29.0 6-30P 300 lbs/136 kg
SLT4-R
4 120/208-230/60/1 20.0 29.0 6-30P 300 lbs/136 kg
6"
15.2cm
36"
91.4cm
6"
15.2cm
36"
91.4cm
ELEVATION VIEW
SLT4-L
ELEVATION VIEW
SLT4-R
PLAN VIEW
SLT4-L
PLAN VIEW
SLT4-R
END VIEW
SLT4-L
END VIEW
SLT4-R
15.50"
39.4cm
68.62"
174.3cm
30.25"
76.8cm
15.50"
39.4cm
68.62"
174.3cm
30.25"
76.8cm
SLT4
TrimLine L-Shaped Heated Tray Make-Up Serving Counters
  • Page 1 1
  • Page 2 2

Delfield Shelleysteel SLT4-R Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI