Keating 48x30 FT Datasheet

Keating
Brand
Keating
Model
48x30 FT
Type
Datasheet

This manual is also suitable for

SPECIFICATIONS
FAX: 708-246-3100PHONE: 708-246-30001-800-KEATINGMcCOOK, IL, 60525 USA8901 WEST 50th STREETKEATING OF CHICAGO, INC.
ww w.keatingofchicago.com
PROJECT
QUANTITY
ITEM NO.
DATE
APPROVAL
SIGNATURE
48" MIRACLEAN
®
Gas Griddle
PRINTED IN THE USA 07/2011 48mrcln_2011
48" MIRACLEAN
®
Gas Griddle
□
4" Legs
□
Stand, or Stand with Shelf and Casters
□
Cutting Board (Stainless or Richlite)
□
Plate Shelf
□
Thermostat Knob Guard
□
Extra Thermostats
□
Belly Bar
□
Streaked Surface
□
Custom Griddle Styles or Confi gurations
□
Security Package
Standard Features:
Options:
As continuous product improvement occurs, specifi cations
may be changed without notice.
9902091 9902091
Stand with Casters or 4" Legs
and Streaked Sections are Optional
100% customer satisfaction
Saves 44% in clean up
Cooler kitchen
Uniform heat distribution allows you to cook
at lower temperatures, reducing shrinkage
Saves 32% in energy costs
Reduced fl avor transfer
Zoned temperature control
No electrical connections needed
The Keating MIRACLEAN
®
Griddle is designed to provide
maximum performance with many benefi ts to the opera-
tor. The mirror surface is achieved in a special eight step
process. High input burners rated at 30,000 BTU/hr. for
natural gas are mounted every 12" to ensure perfor-
mance and recovery allowing the operator to use zone
cooking for different products.
Saves on energy costs
Documented energy savings of 32% by Pacifi c Gas &
Electric means dollar savings of up to $400 per year in
energy costs on a 36" model. The MIRACLEAN
®
surface
also reduces radiated heat loss to less than 10% of a
conventional steel plate griddle. By keeping heat on the
surface and out of the kitchen, the MIRACLEAN
®
Griddle
reduces air conditioning demands and gives the chef a
cooler cooking environment.
Reduces fl avor transfer
The smooth MIRACLEAN
®
surface prevents food particles
from being trapped as they are in steel plate griddles.
The surface virtually eliminates fl avor transfer.
Saves 44% in clean up
A documented study by the University of Illinois General
Engineering department confi rmed what has long been
know by MIRACLEAN
®
operators - cleaning the MIRA-
CLEAN saves time! 44% savings means less labor
cost and high productivity. Cleaning a 36" MIRACLEAN
versus a conventional steel plate model 3x daily would
mean savings of $2,600 over the life of the unit. Clean-
ing the surface takes 3 easy steps:
1. scrape with the Keating scraper
2. wash with a Keating palmetto brush and water
3. polish with Keating Klenzer and a damp cloth
No more griddle bricks, grill screens or harsh chemicals
needed, and reseasoning the plate is not necessary.
Accurate temperature control
MIRACLEAN
®
Griddles feature zoned temperature
control to ensure temperature accuracy in cooking.
The MIRACLEAN surface allows the operator to cook at
lower temperatures to control the degree of carmeliza-
tion and product shrinkage.
FAX: 708-246-3100PHONE: 708-246-30001-800-KEATINGMcCOOK, IL, 60525 USA8901 WEST 50th STREETKEATING OF CHICAGO, INC.
ww w.keatingofchicago.com
48" MIRACLEAN
®
Gas Griddle
PRINTED IN THE USA 07/2011
48mrcln_2011
48" MIRACLEAN
®
Gas Griddle
As continuous product improvement occurs, specifi cations may be changed without notice.
Thermostat - Millivolt sealed contacts, close range,
hydraulic type, accurate to ±5° from 250° to 550°F. Ap-
plication of this thermostat is patented by Keating.
100% Safety Shut Off - Millivolt, thermocouple type with
100% safety shut off.
Standard Accessories - Keating razor scraper with a
packet of 10 blades, 4" wide spatula, long handle pal-
metto brush, egg turner and sample of Keating Klenzer.
Electrical Connections - Not required.
Gas Requirements - Install a 3/4" male NPT connec-
tion and 4" water column pressure (natural gas). Supply
pressure must be 7" (natural gas) and 11" (LP) water
column.
Special Order Options - 4" legs, stand, stand with shelf
and casters, cutting board (stainless or richlite), plate
shelf, thermostat knob guard, extra thermostats, belly
bar, streaked surface, custom griddle styles and confi gu-
rations, and security package.
SPECIFICATIONS
Griddle Plate -
High carbon, 3/4" steel plate with our
patented Trivalent Chromium surface applied in a special
8-step process to ensure a mirror smooth surface. The
MIRACLEAN
®
plate has an emissivity rating of .078.
Drain Trough - A 3" wide drain trough is on the left side,
and the front drain trough is 2" wide (FT models have
a front trough only), with a 4" x 1 1/2" drain in the left
front. It is located above a large stainless steel grease
drawer with baffl es and a rear handle. The perimeter and
grease trough are 14 gauge stainless steel. The perim-
eter is 4 1/2" high across the back with sides angling
from 4 1/2" in the rear to 1/2" at the front. Sides and
rear perimeter have an exterior trim of 22 gauge stain-
less steel.
Gas Burners - Atmospheric type “H” shaped cast iron
construction, with one burner for every 12" of linear
plate surface. Each pilot is manually ignited with a
(piezo) igniter.
Cabinet - The cabinet has an inner liner made of 20
gauge aluminized steel. The outer cabinet has 14 gauge
stainless steel sides, an 18 gauge stainless steel back
and 16 gauge aluminized steel bottom. A stainless steel
fl ue diverter has been added to extend fl ue.
NOT FOR OUTDOOR INSTALLATION - NOT FOR DOMESTIC INSTALLATION
A minimum of 24" at the front of the unit
should be allowed for servicing and operation;
a minimum of 6" on each side and at the rear
of each unit for combustible materials.
BTU/hr. BTU/hr. (A) (B) Working (C)
MODEL NG LP Burners T-Stats Width Depth Height Height Plate Size Weight
48x24 120,000 120,000 4 2 48 1/2" 24 5/8" 18" 12" 45" W x 18" D
405 lbs.
48x30 120,000 120,000 4 2 48 1/2" 30 5/8" 18" 12" 45" W x 24" D
485 lbs.
48x30 FT 120,000 120,000 4 2 48 1/2" 30 5/8" 18" 12" 48" W x 24" D
525 lbs.
48x36 FT 146,000 146,000 4 2 48 1/2" 36 5/8" 18" 12" 48" W x 30" D
600 lbs.
FT = Front Trough Only
INSTALLER - Check plumbing and gas codes for proper gas supply line sizing to sustain burner pressure when all gas
appliances are full on. Supply pressure must NOT be above 13.84" WC or gas valve damage may occur.
GAS REQUIREMENTS / DIMENSIONS
  • Page 1 1
  • Page 2 2

Keating 48x30 FT Datasheet

Keating
Brand
Keating
Model
48x30 FT
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents