Manual
Nero Move it
Nero Move it
Copyright and Trademark Information
Copyright and Trademark Information
This document, like the software described therein, is provided as a license and may only be used or reproduced in accordance with
the licensing agreement. The contents of this document, as well as the associated software, is subject to change without prior notice.
Nero AG rejects any responsibility for the correctness of the contents of this document and rejects any claims that transcend the
clauses of the guarantee agreement.
This document and all of its contents are protected by copyright and are the property of Nero AG. All rights reserved. In addition, this
document contains material that is protected by internationally valid copyright. This document may not be reproduced, transmitted, or
transcribed in whole or in part without the express written permission of Nero AG.
Please keep in mind that existing graphics, pictures, videos, music titles or other materials that you may wish to insert or transcribe
into projects may be protected by copyright. The unauthorized use of this type of material in your projects may violate the rights of
the owner of the copyright. Make sure that you obtain all necessary authorizations from the owner of the copyright.
Unless you own the copyright, have permission from the copyright owner or your actions fall under the "fair use" provisions of copy-
right law, you may be violating national or international copyright laws. The transcribing, re-formation, modification or publication of
copyright-protected material may lead to claims for damages and the enforcement of other legal measures against you. If you are
unsure of your rights, you should contact your legal advisor.
Nero Move it requires technologies developed by third party manufacturers, some of which are contained in Nero Move it as demo
versions. These applications can be activated online free of charge or by sending an activation fax to have unlimited use of the ver-
sion. Only the the data necessary for activation of technology licensed from third parties will be transmitted. For unlimited use of
Nero Move it, it is therefore necessary to have an Internet connection or a fax machine.
Copyright © 2006 - 2008 Nero AG and its licensors. All rights reserved.
Nero, the Nero logo, Nero Digital, Nero Essentials, Nero Express, Nero ImageDrive, Nero LiquidTV, Nero MediaHome, Nero Pho-
toSnap, Nero Recode, Nero RescueAgent, Nero ShowTime, Nero SecurDisc, Nero StartSmart, Nero Vision, InCD, Move it, and Ul-
traBuffer are trademarks or protected trademarks of Nero AG.
Adobe, Acrobat, Acrobat Reader and Premiere are trademarks or protected trademarks of Adobe Systems, Incorporated.
AMD Athlon, AMD Opteron, AMD Sempron, AMD Turion, ATI Catalyst and ATI Radeon are trademarks or registered trademarks of
Advanced Micro Devices, Inc.
ATSC is a trademark of the Advanced Television Committee.
ICQ is a registered trademark of AOL, LLC.
Apple, iPhoto, iPod, iTunes, iPhone, FireWire, and Mac are brands or registered trade names of Apple, Inc.
ARM is a registered trademark of ARM, Ltd.
AudibleReady is a registered trademark of Audible, Inc.
BenQ is a trademark of the BenQ Corporation.
Blu-ray Disc is a brand of Blu-ray Disc Association.
CyberLink is a registered trademark of CyberLink Corp.
DLNA is a registered trademark of Digital Living Network Alliance.
DivX and DivX Certified are registered trademarks of DivX, Inc.
Dolby, Pro Logic and the double-D symbol are brands or registered trademarks of Dolby Laboratories, Inc.
DTS and DTS Digital Surround are trademarks or registered trademarks of DTS, Inc.
DVB is a registered trademark of the DVB Project.
Freescale is a trademark of Freescale Semiconductor, Inc.
Google and YouTube are trademarks of Google, Inc.
WinTV is a registered trademark of Hauppauge Computer Works, Inc.
Intel, Pentium and Core are trademarks or registered trademarks of Intel Corporation.
Linux is a registered trademark of Linus Torvalds.
Memorex is a registered trademark of Memorex Products, Inc.
ActiveX, ActiveSync, DirectX, DirectShow, Internet Explorer, Microsoft, HDI, MSN, Outlook, Windows, Windows Mobile, Windows
NT, Windows Server, Windows Vista, Windows Media, Xbox, Xbox 360, the Windows Vista start button and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation.
My Space is a trademark of MySpace, Inc.
NVIDIA, GeForce and ForceWare are brands or registered trademarks of NVIDIA Corporation.
Nokia is a registered trademark of Nokia Corporation.
CompactFlash is a registered trademark of SanDisk Corporation.
Sony, Memory Stick, PlayStation, PLAYSTATION and PSP are brands or registered trademarks of Sony Corporation.
HDV is a trademark of Sony Corporation and Victor Company of Japan, Limited (JVC).
UPnP is a registered trademark of the UPnP Implementers Corporation.
Labelflash is a registered trademark of Yamaha Corporation.
The trademarks mentioned here are named for information purposes only. All trade names and trademarks are the property of their
respective owners.
Nero AG, Im Stoeckmaedle 13-15, D-76307 Karlsbad, Germany
Table of contents
Nero Move it
III
Table of contents
1 Start Successfully 4
1.1 About the manual 4
1.2 About This Application 4
1.3 Installing Nero Move it 5
1.4 Working with Nero Move it 7
1.4.1 Organizing Categories (Container) 8
1.4.2 Managing Media Files (Workspace) 10
1.4.3 Exchanging media files 11
2 Main window 13
2.1 Device List 15
2.2 Containers 15
2.3 Workspace 17
2.3.1 Thumbnail view 19
2.3.2 Table view 20
2.3.3 Context menu 21
2.3.4 Details window 22
2.3.5 Control panel 24
2.4 Comparison window 25
3 Settings 27
3.1 General Settings Window 27
3.1.1 Color Schemes Tab 28
3.1.2 Indexed Folders Tab 28
3.1.3 Media Folders Tab 29
3.1.4 Quality Tab 30
3.1.5 Other Tab 31
3.2 Device Settings 32
3.2.1 [Recognized Device] Tab 33
3.2.2 User-Defined Device Tab 35
3.3 Online Settings 36
4 Technical Information 38
4.1 System requirements 38
5 Index 39
6 Contact 41
Start Successfully
1 Start Successfully
1.1 About the manual
This manual is intended for all users who want to learn how to use Nero Move it. It is proc-
ess-based and explains how to achieve a specific objective on a step-by-step basis.
In order to make best use of this documentation, please note the following conventions:
Indicates warnings, preconditions or instructions that have to be pre-
cisely followed.
Indicates additional information or advice.
1. Start …
A number at the beginning of a line indicates a request for action. Car-
ry out these actions in the order specified.
Indicates an intermediate result.
Indicates a result.
OK
Indicates text passages or buttons that appear in the program inter-
face. They are displayed in bold print.
(see...)
Indicates references to other chapters. They are executed as links
and are shown in red and underlined.
[…]
Indicates key combinations for entering commands.
1.2 About This Application
Nero Move it is an all-in-one solution for iPods, PSPs, handheld devices, digital cameras and
cellular phones. It allows you to transcode and synchronize your digital content for use with
supported mobile devices. Simply connect your mobile device to your PC and Nero Move it
transfers the files automatically in the ideal format - even if you copy them directly from one
device to another.
Even if you're an inexperienced user, you have a clear overview of both the sources for your
files and of the corresponding data volumes thanks to the software's intuitive interface. You
can access all pictures, videos and music files with no problem whatsoever, as well as or-
ganize them according to your preferences, e.g. according to artist or date.
Nero Move it
4
Start Successfully
1.3 Installing Nero Move it
To install Nero Move it, you need administrator rights for all operating systems.
An installation wizard walks you through the quick and uncomplicated installation process.
To install Nero Move it, proceed as follows:
1. Close all Microsoft Windows programs and exit any anti-virus software that may be running.
2. Start the installation process by double-clicking the downloaded installation file.
The files are automatically unzipped and stored on the C:\ drive in a temporary folder
from which they are automatically deleted once they have been used.
The installation is prepared and the installation wizard is displayed.
If you purchased Nero Move it as a Box Version, insert the disc into your com-
puter's drive and start the installation process by clicking the button.
If the program does not start automatically, select the drive with the disc in
Windows Explorer. You can start the installation wizard manually by double-
clicking the setup.exe file.
3. button. Click the Next
The screen is displayed. Installation of Nero Ask Toolbar
4. If you want to use the Ask
se the first option button.
Toolbar, please read the licensing agreement carefully and choo-
e the Ask Toolbar, choose the second option button.
e agreement. Installation is not possible without this agreement.
r in the input fields.
Corporate customers should also in-
eir
If you do not
want to us
5. Click the Next button.
The License Conditions (EULA) screen is displayed.
6. Please read the license agreement carefully and select the appropriate check box if you
agree to the terms of th
7. Click the Next button.
The Personalize Nero Move it screen is displayed.
8. me and serial numbeEnter your na
clude th company's name.
Nero Move it
5
t
The serial number can be found on the back of the disc jacket. If you are using
d version you will have received the serial number per e-mail.
o
se between Default, i.e. standard installation or User-Defined
nguages and choo-
he downloa
9. Click the Next button.
The Select Installation Type screen is displayed.
Here it is possible to cho
installation. In the user-defined installation, you can determine the la
se the installation path.
Start Successfully
Nero Move it
6
f you
Installation screen is displayed.
uages you wish to install and click the Next button.
e Change button.
The
10. Choose the required installation type and click the Next button.
If you choose a default installation, the Optional Settings screen is displayed. I
choose custom installation, the User-defined
11. er-defined installation: If you have chosen the us
1. Select the required folder and click the OK button.
2. Click the Next button.
The Select Application Language screen is displayed.
3. Select the check boxes for the lang
The next screen is displayed.
4. If you want to define the installation folder, click th
The Browse Folder window is displayed.
Optional Settings screen is displayed.
e
plications be uninstalled before pro-
If application
s are found on your computer that could conflict with the softwar
to be installed, the Uninstallation of the Products Required screen is dis-
played. It is recommended that these ap
ceeding with the installation.
on
Nero Move it checks the availability of required components, such as DirectX
nts screen your PC. If applications are missing, then the Missing Compone
is displayed. Please select the components you want to download and install.
s.
cess is started. Nero Move it is installed in the selecte
d folder, and a
cess.
sc
reen is displayed.
ms, if any, occur.
ct the check box and click
wizard is displayed.
zard is closed.
You have now installed Nero Move it. The Nero Move it link is now available on the com-
puter's desktop.
12. if you want to adapt optional settings, select or clear the required check boxe
13. Click the Next button.
The Ready to Start Installation Process screen is displayed.
14. Click the Next button.
The installation pro
progress bar informs you of the progress of the installation pro
15. Click the Next button.
The Help Us to Improve Our Software
To offer a better service, Nero collects anonymous data to determine which features are
used and what proble
16. If you want to take part in the anonymous collection of data, sele
the Next button.
The final screen of the installation
17. Click the Exit button.
The installation wi
Start Successfully
Nero ControlCenter
The Nero Move it application is installed with Nero ControlCenter.
With Nero ControlCenter, you can determine whether new updates are avail-
able for your Nero products and can download them if required. In addition, you
can select an installed language and enter or remove serial numbers. You can
find further information in the Nero ControlCenter manual.
1.4 Working with Nero Move it
Nero Move it is an all-in-one solution for iPods, PSPs, handheld devices, digital cameras and
cellular phones. It allows you to transcode and synchronize your digital content for use with
supported mobile devices. The application reacts automatically as soon as a new device is
connected to the PC, and includes the device in the device list with an appropriate icon.
A list of the devices supported by Nero Move it is available at www.nero.com.
All devices that have been connected with Nero Move it at least once are displayed in the
device lists. Accordingly, you can access the container and workspace for a device even if
the device is not currently connected to your PC.
Nero Move it makes a note of all process steps and automatically starts the actual update as
soon as the device is connected to the computer again. Every device that is waiting for an
update is marked in the device list.
As soon as you reconnect the known device to the PC, Nero Move it also starts an automatic
data synchronization process. New media files are copied to your hard drive once a day by
default.
Of course, you can make changes to the default settings at any time under Settings. There,
you can systematically configure any sharing options and quality settings you want, as well
as define where media files should be saved on your computer.
Update device profile
The database of supported devices is constantly being expanded. Nero Move it
updates the device profiles automatically every time it is restarted at no cost to
you.
Clicking the About button (in the main window menu bar) displays contact and
copyright information. You can also find the Update device profile link, which
establishes a connection to the Internet, requests the latest device profiles and
saves them in Nero Move it.
Nero Move it
7
Start Successfully
Work in Nero Move it basically deals with two different activities:
Collecting and managing data
Choose a device of your preference in the device list and organize the pictures, videos and
music files on it according to your preferences. Thanks to its intuitive interface, you have a
clear overview of the sources for your files and of the corresponding data volumes.
Nero Move it
8
n the PC and a device, between two devices or between on-
to the PC and automatically makes adjustments to use the ideal format during the
m the device list, you must store you u-
ser name and password in Online Settings once.
Transferring and publishing data
You can exchange data betwee
line services and a device/PC.
Choose the source and target in both device lists and transfer selected media files with a
simple click. Nero Move it synchronizes data contents for you, transfers files to every device
connected
process.
To use online services such as My Nero directly fro
a connection to the Internet and opens the corre-
sponding registration form.
pace) 10
Exchanging media files 11
u have a
d of the corresponding data volumes.
ze the cate es on your device according to your preferences, proceed as fol-
Ne
w to the online service?
If you do not have a user account for the required online service yet, you can
set up an account directly from Nero Move it. Clicking the Sign up to [Online
Service] button establishes
See also:
Organizing Categories (Container) 8
Managing Media Files (Works
1.4.1 Organizing Categories (Container)
You can use Nero Move it to organize the media files on your devices according to your pre-
ferences in a simple and straightforward manner. Thanks to its intuitive interface, yo
clear overview of the sources for your files an
The following requirement has to be fulfilled:
The device is supported by Nero Move it and is available in the device list.
To organi gori
lows:
1. Use the and buttons to navigate through the device list and click the icon for the
by using folders from A to Z and subfolders with the name
of the corresponding Artist.
requi
red device.
The container and the workspace for the selected device are displayed.
You can find all the media files available on the device inside the container, sorted inside
folders under the following categories: Pictures, Videos and Music. Nero Move it auto-
matically sorts music for you
Start Successfully
Nero Move it
9
All devices that have been connected with Nero Move it at least once are dis-
played in the device lists. Accordingly, you can access the container and work-
space for a device even if the device is not currently connected to your PC.
If a device is not currently connected to the PC, Nero Move it makes a note of
all process steps and automatically starts the actual update as soon as the de-
vice is connected to the computer again. Every device that is waiting for an up-
date is marked in the device list.
2. Choose the required category inside the container: Music, Pictures or Videos.
The media files contained are displayed inside the workspace, and any existing subfold-
ers are displayed in the container.
subfolder, click the
3. If you want to add a category, folder or button in the container.
A new folder is created.
4. If you want to rename a folder:
1. Select the folder inside the container and click the
button.
instead of the name.
The name of the folder is changed.
A text box is
displayed
2. Enter the required name.
5
The cat
egories and folders included by default cannot be renamed.
ant to delete a folder, select the
folder inside the container and click the . If you w
The folder is deleted together with all its content.
button.
The categories and folders included by default cannot be deleted.
ers in the container, and the
media files they contain are displayed in the workspace.
pace) 10
Exchanging media files 11
You have organized the categories on your device according to your preferences.
Now you can simply select the required folders or subfold
See also:
Working with Nero Move it 7
Managing Media Files (Works
Start Successfully
Nero Move it
10
1.4.2
g to your pre-
you have a
nt has to be fulfilled:
.
o manage the pictures, videos and music files on a device, proceed as follows:
1.
Managing Media Files (Workspace)
You can use Nero Move it to organize the media files on your devices accordin
ferences in a simple and straightforward manner. Thanks to its intuitive interface,
clear overview of the sources for your files and of the corresponding data volumes.
The following requireme
The device is supported by Nero Move it and is available in the device list
T
Use the
and buttons to navigate through the device list and click the icon for the
vice.
ntainer and the workspace for the
selected device are displayed.
de
The co
requi
red
All devices that have been connected with Nero Move it at least once are dis-
played in the device lists. Accordingly, you can access the container and work-
space for a device even if the device is not currently connected to your PC.
If a device is not currently connected to the PC, Nero Move it makes a note of
all process steps and automatically starts the actual update as soon as the de-
is marked in the device list.
and click the
vice is conn
ected to the computer again. Every device that is waiting for an up-
date
2. If you want to see a picture or play a video or music file, open (by right-clicking) the file's
context menu
button.
s the video or
3. ation for a file and want to store additional
The window with the control panel opens and displays the picture or play
music file.
If you want to see the available detailed inform
information:
1. Open (by right-clicking) the file's context menu and click the
button.
The Details window opens. All known information in the display and input fields is
want and click the OK button.
nd the window is closed.
displayed based on the selected file.
2. Make any additions and/or changes you
Additions or changes are applied a
4. If y : ou want to rate a file or want to change the rating for a file
1. Open (by right-clicking) the file's context menu and click the
button.
The
input field opens.
and close the context menu. 2. Assign the required number of stars
The assigned stars are displayed in the workspace.
5. If you want to delete a media file from the device, open (by right-clicking) the file's context
menu and click the
button.
The file is deleted from the device.
Start Successfully
Nero Move it
11
ve organized the pictures, videos and music files on your device according to y-
s on different devices in a simple and straight-
files between your PC and a device or between two de-
d
s and a PC/device.
files are supported by
o exchange pictures, videos or music files between the PC and a device, between devices
o en
1. U
You ha
our preferences.
Now you can synchronize the media file
forward manner or exchange
vices.
See also:
Working with Nero Move it 7
Organizing Categories (Container) 8
Exchanging media files 11
1.4.3 Exchanging media files
You can use Nero Move it to synchronize the media files of different devices in a simple an
straightforward manner or to exchange data between the PC and a device, between two de-
vices or between online service
The following requirements have to be fulfilled:
The device or devices that you want to use for exchanging media
Nero Move it and are available in the device list.
Online services that you want to use for exchanging media files are available in the de-
vice list. In order for this to happen, you must store your user name and password under
Online Settings once.
T
r betwe
se the
an online service and a device/PC, proceed as follows:
and buttons to navigate through the left device list and click the icon for
d device (or f applicable, the icon for your PC or for the required online servicthe requi e). re
The container and the workspace for the selected device are displayed.
p
All devices that have been connected with Nero Move it at least once are dis-
work-layed in the device lists. Accordingly, you can access the container and
space for a device even if the device is not currently connected to your PC.
2. Use the and buttons to navigate through the right device list and click the icon for
.
orkspace and any existing
d on the respective workspace.
ht workspa
ce, select the
required files on the left workspace and click the
the requi
red device.
The container and the workspace for the selected device are displayed
3. Choose the Music, Pictures or Videos category in the container area as required.
The media files contained are displayed in the respective w
subfolders are displayed on the container.
4. If you want to copy files to any existing subfolders, choose the required subfolders.
The media files contained are displaye
5. If you want to copy media files from the left workspace to the rig
button.
Start Successfully
Nero Move it
12
ly.
ace, select the
The media files are copied to the right workspace. Nero Move it automatically transfers
the data in the format that is ideal for the target device. A window notifies you as soon as
the transfer has ended successful
6. If you want to copy media files from the right workspace to the left worksp
required files on the right workspace and click the
button.
The media files are copied to the left workspace. Nero Move it automatically transfers the
data in the format that is ideal for the target device. A
window notifies you as soon as the
transfer has ended successfully.
7. If an you w t to synchronize both workspaces, click the button.
dia files on both workspaces are synchro
nized. Nero Move it automatically tr
data
The me ans-
fers the in the format that is ideal for the respective target device. A window notifies
you as soon as the transfer has ended successfully.
eplaced or updated individually in this win-
If selected media files already exist on the target device or the device does not
have enough free disk space for them, the Comparison window opens. You
can decide which files should be r
dow.
If a device is not currently connected to the PC, Nero Move it makes a note of
tomatically starts the actual update as soon as the de-
er again. Every device that is waiting for an up-
You have transferred the required files.
See also:
Working with Nero Move it 7
Organizing Categories (Container) 8
Managing Media Files (Workspace) 10
all pro
cess steps and au
vice is connected to the comput
date is marked in the device list.
Main window
2 Main window
The Nero Move it main window is divided into several clearly laid out areas and a menu bar
on its top border. All devices available on Nero Move it are displayed in lists on the right and
left areas of the window. You can use these lists to select the devices from which and to
which you want to copy media files.
You can find information on the selected device both in a small container (in the device list)
and next to it, inside the large workspace. The different pictures, videos and music files sto-
red on the device are listed here. You can, for instance, search for files and reorganize them
into groups. The available disk space on the device is also displayed in the workspace.
Main Window with Two Workspaces
The following buttons are available at the center of the window to enable the exchange of
media files between the right and left workspaces:
Transfers or copies selected media files from the left workspace to the right
workspace. A window notifies you as soon as the transfer is completed success-
fully.
If selected media files already exist on the target device or the device does not
have enough free disk space for them, the Comparison window opens. You
can decide which files should be replaced or updated individually in this window.
Synchronizes all media files between both selected workspaces.
The required category must be selected on both workspaces.
Nero Move it
13
Main window
Transfers or copies selected media files from the right workspace to the left
workspace. A window notifies you as soon as the transfer is completed success-
fully.
If selected media files already exist on the target device or the device does not
have enough free disk space for them, the Comparison window opens. You
can decide which files should be replaced or updated individually in this window.
The following buttons are available on the menu bar:
Settings
Opens the Device Settings screen. Here you can define the conversion set-
tings for devices that are not recognized by Nero Move it.
Help
Displays the online help.
About
Displays contact and copyright information.
Update device profile
The database of supported devices is constantly being expanded. Nero Move it
updates the device profiles automatically every time it is restarted at no cost to
you.
Clicking the About button (in the main window menu bar) displays contact and
copyright information. You can also find the Update device profile link, which
establishes a connection to the Internet, requests the latest device profiles and
saves them in Nero Move it.
See also:
Device List 15
Containers 15
Workspace 17
Comparison window 25
Nero Move it
14
Main window
2.1 Device List
You can use the device lists to select the devices from and to which you want to copy media
files. You can navigate through the lists by using the
and buttons. Clicking the icon
for the required device chooses the device. Nero Move it assigns the appropriate icons au-
tomatically and distinguishes, for example, between the local PC, digital cameras, cellular
phones and online services such as My Nero. The User-Defined type is assigned to un-
known device types.
Update device profile
The database of supported devices is constantly being expanded. Nero Move it
updates the device profiles automatically every time it is restarted at no cost to
you.
Clicking the About button (in the main window menu bar) displays contact and
copyright information. You can also find the Update device profile link, which
establishes a connection to the Internet, requests the latest device profiles and
saves them in Nero Move it.
All devices that have been connected with Nero Move it at least once are displayed in the
device lists. Accordingly, you can access the container and workspace for a device even if
the device is not currently connected to your PC. In this case, the container and workspace
display the files that were enabled during the last connection.
Nero Move it makes a note of all process steps (e.g. copying or deletion processes) and au-
tomatically starts the actual update as soon as the device is connected to the computer a-
gain. Every device that is waiting for an update is marked in the device list.
See also:
Main window 13
Containers 15
Workspace 17
2.2 Containers
You can find information on a selected device in the container first, and then in the work-
space next to it. The container is displayed as soon as you click the required device in the
device list.
Nero Move it displays all devices that have been connected with the application and were
created once, even if they are not currently connected to the PC, in the device list. The files
that were enabled during the last connection are displayed in the workspace.
You can find all the media files available on the device inside the container, sorted inside fol-
ders under the following categories: Pictures, Videos and Music. Nero Move it automati-
cally sorts music for you by using folders from A to Z and subfolders with the name of the
corresponding Artist. Double-clicking a required folder displays the contained media files in
Nero Move it
15
Main window
the workspace and displays any existing subfolders in the container. You can click the
button to navigate a level up.
Containers
The known icon from the device list displays the device type on the top area of the container.
The following buttons are available:
Adds folders that Nero Move it should monitor for media files. The Select
folders for indexing window opens.
Only available for local hard drives.
/
Interrupts the scanning process or continues the device scan in search of
newly added folders.
Only available for external devices.
Ensures that no data is being exchanged with the device before removal, so
that no accidental data losses occur.
Only available for external devices.
You can of course add, edit or delete folders for all data files according to your preferences.
The following buttons are available on the lower area of the container:
Creates a new folder or a new category
Displays a text box instead of the name for the selected folder. You can enter
the required name for the folder here.
Only available if at least one folder has been selected in the container. The ca-
tegories and folders included by default cannot be renamed.
Nero Move it
16
Main window
Deletes a selected folder and all the media files it contains from the container
and from the selected device.
Only available if at least one folder has been selected in the container. The ca-
tegories and folders included by default cannot be deleted.
See also:
Main window 13
Device List 15
Workspace 17
2.3 Workspace
You can find information on a selected device in the container first, and then in the work-
space next to it. The container is displayed as soon as you click the required device in the
device list. Nero Move it lists all media files available on the device, sorted according to
categories, here. You can switch between table view and thumbnail view.
Double-clicking a media file opens a window with a control panel for playing a preview in Ne-
ro Move it. Right-clicking a media file opens its context menu, which allows quick access to
basic features.
Workspace
When you move the mouse over the device icon in the top corner, an information area with a
pie chart and a table key is displayed. The following columns are available:
Pie chart
Represents the value of both the disk space used up by different file types
and of free available disk space as part of a circle.
Nero Move it
17
Main window
Media
Lists the file types stored on the device. Free disk space is also listed.
Percent
Shows, for each file type included in the pie chart, as well as for free disk
space, the available value as a percent.
Size
Shows, for each file type included in the pie chart, as well as for free disk
space, the available value in MBs.
Files
Lists the number of detected files for the respective file type.
The following setting options are available in the workspace:
Check box
x
Closes the workspace and the container.
Check box
Displays
If the check box is enabled, all available media files for the selected category
are displayed.
If the check box is disabled, the media files belonging to the corresponding
category are hidden.
The following category check boxes are available: Music, Pictures and Vid-
eos. All check boxes are enabled by default.
Button
Switches to table view, where all media files are displayed, sorted, in a table
with columns (sorted according to title, date, etc.)
Thumbnail view is selected by default.
Button
Switches to thumbnail view, in which all media files are displayed with a
thumbnail or an appropriate large icon and their file name.
Thumbnail view is selected by default.
Button
Select All
Selects all media files displayed in the workspace.
Button
Delete
Deletes selected media files from the workspace and from the selected de-
vice.
Only available if at least one file has been selected in the workspace.
Button
Details
Opens the Details window. Here you can see existing detailed information
on the files and store additional information.
Only available if at least one file has been selected in the workspace.
See also:
Main window 13
Containers 15
Thumbnail view 19
Table view 20
Context menu 21
Details window 22
Control panel 24
Nero Move it
18
Main window
2.3.1 Thumbnail view
In the workspace thumbnail view, all media files are displayed with their file name and a
thumbnail or an appropriate large icon. You can find the small icon that allows you to recog-
nize the respective file type immediately in the lower bottom corner of every thumbnail. If you
have assigned a rating for individual files, the assigned stars are also displayed.
Workspace with Thumbnail View
The following setting options are available in thumbnail view:
Button with
drop-down menu
Sort
Sorts the displayed media files according to a required criterion: Title,
Date, Artist, Album or Rating.
Files are sorted according to title by default.
Input field
Search
Displays the required search terms. You can enter one or more key-
words here.
Button
Starts the search process.
Nero Move it displays the search results in the workspace. All other
media files stored on the corresponding device are hidden.
See also:
Workspace 17
Table view 20
Nero Move it
19
Main window
2.3.2 Table view
In the workspace table view, all media files are displayed, sorted, in a table. You can find the
small icon that allows you to recognize the respective file type immediately on the left, next
to the file name in the first column.
Clicking the title row of a column sorts the displayed media files according to the criterion of
the selected column - Title, Date, Artist, Album or Rating. Clicking the title row again re-
verses the order (e.g. lists files sorted according to their date from the newest one to the old-
est one, instead of the opposite order).
If you have assigned a rating to individual files, the stars assigned are displayed under the
Rating column. You can also assign new ratings or change the number of assigned stars
here.
Workspace with Table View
The following setting options are available in table view:
Input field
Search
Displays the required search terms. You can enter one or more keywords
here.
Button
Starts the search process.
Nero Move it displays the search results in the workspace. All other media
files stored on the corresponding device are hidden.
See also:
Workspace 17
Thumbnail view 19
Nero Move it
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
