V TAC V-TAC VT-12004 LED Waterproof Fitting Light User manual

Category
Holders
Type
User manual

V TAC V-TAC VT-12004 LED Waterproof Fitting Light offers bright and energy-efficient illumination for outdoor areas. Its transparent PS diffuser ensures higher light transmittance, while the opaque HIPS housing provides good mechanical performance. Installation is straightforward with direct mounting and no starter required. The light emits a 120° beam angle and boasts an impressive 20,000 hours lifespan. This durable fitting operates on AC 220-240V, 50Hz power and comes in a compact size of 666x94x55mm, making it suitable for various outdoor lighting applications.

V TAC V-TAC VT-12004 LED Waterproof Fitting Light offers bright and energy-efficient illumination for outdoor areas. Its transparent PS diffuser ensures higher light transmittance, while the opaque HIPS housing provides good mechanical performance. Installation is straightforward with direct mounting and no starter required. The light emits a 120° beam angle and boasts an impressive 20,000 hours lifespan. This durable fitting operates on AC 220-240V, 50Hz power and comes in a compact size of 666x94x55mm, making it suitable for various outdoor lighting applications.

INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the
warranty. This product is warranted for manufacturing defects only.
WARNING!
1. Please make sure to turn off the power before starting the installation.
2. . If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
3. Installation should only be done by a certified electrician.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
INSTALLATION DIAGRAM:
INSTALLATION INSTRUCTIONS
1. Fix the mounting bracket.
2. Mount Waterproof Lamp into mounting brackets
put in cable and connect to the connector
3. “Click” Assembling lamp Holders
4. Install the LED Lamp
5. Assemble Lamp cover with agrafes
PRODUCT FEATURES
• Transparent PS diffuser with higher light transmittance.
• Opaque HIPS housing with good mechanical performance.
• Input on one side of the housing.
SAFETY INSTRUCTIONS
Turn the power off.
• Do not discharge with general household waste.
• Return only to the specified recycling points in your area.
NOTICE
• Starter not required
• Direct Installation
• Tubes not included
LAMP REPLACEMENT INSTRUCTION
Unlock the clips and open the diffuser to replace
or install the tubes.
BLUE
BROWN L
N
WIRING DIAGRAM
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND D02 P593
LED WATERPROOF FITTING
INSTRUCTION MANUAL
TECHNICAL DATA:
MODEL SKU
7882
7883
7885
7884
MAX.WATTS BEAM ANGLE MATERIAL
LIFE SPAN INPUT VOLTAGE
UNIT SIZE
VT-12004
VT-12005
2x10W
Tube Not included
2x24W
Tube Not included
12
12
PS+HIPS+ABS
PS+HIPS+PC
20,000 Hours
20,000 Hours
666x94x55mm
1576x94x55mm
AC 220-240V,50Hz
AC 220-240V,50Hz
1 2
3
5
4
  • Page 1 1

V TAC V-TAC VT-12004 LED Waterproof Fitting Light User manual

Category
Holders
Type
User manual

V TAC V-TAC VT-12004 LED Waterproof Fitting Light offers bright and energy-efficient illumination for outdoor areas. Its transparent PS diffuser ensures higher light transmittance, while the opaque HIPS housing provides good mechanical performance. Installation is straightforward with direct mounting and no starter required. The light emits a 120° beam angle and boasts an impressive 20,000 hours lifespan. This durable fitting operates on AC 220-240V, 50Hz power and comes in a compact size of 666x94x55mm, making it suitable for various outdoor lighting applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI