Juno Smart Speaker Light Quick Start Guide
The Works with SmartThings words and logo are trademarks of Samsung Electronics Co. Ltd.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Google Home and Google Nest Audio are trademarks of Google LLC.
Hey Google
works with
Hey Google
works with
For more information and detailed instructions visit
www.acuitybrands.com/products/family/connect-smart-home-system
BD
A
1
2
3
C
Factory Default:
SmartThings hub option to
expand functionality and
Group lighting control
Amazon Alexa:
Connect to SmartThings with phone:
Smart Speaker Light Operation with Standard Wall Switch:
Direct to Phone
Reset if necessary:
Google Home:
To ensure your speaker light has the latest software installed please follow these instructions FIRST.
Add Speaker Light with SmartThings
app. Pick “Juno” and use the “connect to
SmartThings” option.
Ask Alexa: “Alexa
discover my devices”.2
1 A SmartThings hub is required when installing 6 or more light fixtures.
2 Echo (4th Generation Smart Home Hub), Echo Plus, Echo Show 10 required. Integration with older Alexa devices will require an Amazon eero 6 Mesh Wifi system or a SmartThings hub.
Download the Samsung SmartThings app and create an
account. Add Speaker Light with the app. Pick “Juno”
as the manufacturer and use the “connect device to
phone” option.
Note: a Hub is not required for software update.
Basic on/off from the wall switch at 100% brightness only. For more light color or dim level choose one of the other 4 options below.
Add Speaker Light with SmartThings app.
Pick “Juno”and use the “connect device
to phone” option.
After completion of onboarding go to the product tile
and click on it. The software update will prompt to
start automatically if not, go to the product menu (top
right corner of interface) and click on it. If sofware is
up to date this option will be grayed out. Otherwise
click on it to start update.
If you plan to use the Speaker light with SmartThings without a hub
finish here. Otherwise, factory reset the unit to begin onboarding to
your selected platform.
Add Speaker Light with Google Home
app.1 Select “set up device” > “new
devices”
+
+
+
Juno Smart Speaker Light Software update ** START HERE**
Juno Smart Speaker Light Connectivity Options (choose one)
To factory reset Juno Speaker Light turn on and off five times slowly from
light switch. Light will blink three times.
