2. Knightsbridge
  3. GU5KW
GU5KW

Knightsbridge GU5KW User guide

  • Hello! I am an AI chatbot trained to assist you with the Knightsbridge GU5KW User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Add Device
(2.4 Ghz only)
To add a device tap the “+” on top right corner, select the product category
and follow the on-screen instructions
USER GUIDE
Download the
SmartKnight App
On Google Play (AndroidTM) or App Store® (Apple®).
Open the app, tap “Register” and follow the on-screen instructions
Enjoy
Enjoy your connected product. For more in-depth instructions,
please see section titled “Wi-Fi Control” in this leaflet
Enable the “SmartKnight” skill in either voice assistant and follow the
app instructions to control your device(s) with your voice.
Visit http://www.mlaccessories.co.uk for further assistance
Hey Google
works with
Setting up Voice Assistants
WI-FI CONTROL
We recommend enabling the Bluetooth to facilitate faster pairing. Please note that due to
the limitations of Bluetooth only one lamp can be added at a time. If more lamps are to be
added to the app this must be done within the time the lamps are in pairing mode, which is
approximately 2 minutes.
• Download the SmartKnight app on Google Play or the App Store®
• Once the app is downloaded, open the app and tap “Register” then
follow the on-screen instructions
• To add a lamp to the app, switch on the power to the lamp
and tap “+” on the top right corner
• Select “Lighting (Wi-Fi)”
• If the light is flashing rapidly and Bluetooth is enabled, the app will
prompt to add the lamp to the app, follow the on-screen instructions
to do so. If the light is not flashing, follow the on-screen instructions to
reset it
• Connect to the desired Wi-Fi network, tap “Confirm” and the app
will start searching for devices. Please note only 2.4 GHz networks
are supported and make sure your device is connected to the same
Wi-Fi network
• After the light has been added successfully to the app, the
lamp can be named and added to a room. After naming the
lamp, tap “Done”
INSTALLATION & MAINTENANCE MANUAL
GU5KW / CL5KW / GLS9BCKW / GLS9ESKW
/