VISUAL COMFORT S2189 User manual

Brand: VISUAL COMFORT

Model: S2189

Type: User manual

VISUAL COMFORT S2189 is a stylish and functional wall lantern designed for outdoor or wet locations. It features a durable construction with a fixture body, mounting plate, and lantern made of high-quality materials. The lantern can be easily removed from the fixture body for bulb installation or cleaning. The S2189 requires a single light bulb (not included) and provides ample illumination for your outdoor space. Installation requires basic tools and should be performed by a qualified electrician.

VISUAL COMFORT S2189 is a stylish and functional wall lantern designed for outdoor or wet locations. It features a durable construction with a fixture body, mounting plate, and lantern made of high-quality materials. The lantern can be easily removed from the fixture body for bulb installation or cleaning. The S2189 requires a single light bulb (not included) and provides ample illumination for your outdoor space. Installation requires basic tools and should be performed by a qualified electrician.

Diagram 1

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove mounting plate (B) from fixture body (G) by removing side

screws (F).

3. Remove lantern (I) from fixture body (G) by removing side screws (H).

4. Using mounting plate (B) as a guide, line up with the junction box

and mark anchor positions.

5. Using a drill bit slightly smaller than the anchor, drill holes in the

marked positions. Install anchors (A) into holes using the hammer.

6. Install mounting plate (B) to junction box and secure with mounting

screws (D), then secure wood screws (C) to anchors (A).

7. Wrap fixture ground wire (green) around the green grounding

screw (see diagram 1). Tighten. Continue fixture ground wire and

connect to supply ground wire (usually green or bare copper) using

wire nut (E).

NOTE: It is imperative that the fixture is grounded.

8. Connect fixture neutral wire (white) to the supply neutral wire

(usually white) using wire nut (E).

9. Connect fixture hot wire (black) to the supply hot wire (usually

black) using wire nut (E).

CAUTION: Do not reverse the hot and neutral connections.

10. Make sure all wire connections are tight, then carefully tuck into the

junction box.

Halle Petite Wall Lantern

Item # S 2189

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

NOTICE:

A

GF

J

M

N

J

I

H

L

L

K

B

EC

D

Bulb not included

Phillips Screwdriver Slotted Screwdriver Drill

Hammer Pencil

Diagram 1

Halle Petite Wall Lantern

Item # S 2189

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

11. Install fixture body (G) to mounting plate (B) and secure with side

screws (F).

12. Remove metal tabs (M) from lantern (I) by unscrewing screws (N),

then install glass panels (J) & (K) & (L) to lantern (I) and secure with

metal tabs (M) using screws (N).

NOTE: Do not over-tighten otherwise shade could become damaged.

13. Install light bulb into the socket.

14. Install lantern (I) to fixture body (G) and secure with side screws (H).

FOR OUTDOOR/WET LOCATION INSTALLATION:

15. Using silicon compound, apply a small bead where backplate meets

the wall to prevent water from entering.

NOTE: Large gaps will need to be corrected before applying

silicon compound.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents.

NOTICE:

A

GF

J

M

N

J

I

H

L

L

K

B

EC

D

Bulb not included

1
2

VISUAL COMFORT S2189 User manual

Brand: VISUAL COMFORT

Model: S2189

Type: User manual

VISUAL COMFORT S2189 is a stylish and functional wall lantern designed for outdoor or wet locations. It features a durable construction with a fixture body, mounting plate, and lantern made of high-quality materials. The lantern can be easily removed from the fixture body for bulb installation or cleaning. The S2189 requires a single light bulb (not included) and provides ample illumination for your outdoor space. Installation requires basic tools and should be performed by a qualified electrician.

Related papers

Other documents