TRUE FINE TD20027W User manual

Category
Motorcycle Accessories
Type
User manual

TRUE FINE TD20027W is a vanity lighting fixture designed to illuminate your bathroom mirror with bright, even light. It features a sturdy metal construction, a stylish chrome finish, and three standard-base bulb sockets, allowing you to customize the brightness and warmth of the light to your preference. Installation is straightforward and can be completed in approximately 25 minutes with basic tools and the included hardware.

TRUE FINE TD20027W is a vanity lighting fixture designed to illuminate your bathroom mirror with bright, even light. It features a sturdy metal construction, a stylish chrome finish, and three standard-base bulb sockets, allowing you to customize the brightness and warmth of the light to your preference. Installation is straightforward and can be completed in approximately 25 minutes with basic tools and the included hardware.

Instruction Manual
Vanity Lighting
Customer Service: [email protected]
PACKAGE CONTENTS
(Not actual size)
B
AA B
BB B B
CC DD
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
WARNING
PREPARATION
Long
monting
screw
x 2
Long Mounting plate
monting
screw
x 2 x 1
x 3
Wire nut
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before
beginning installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
Estimated Assembly Times: 25 minnutes
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver,
Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Print in china
A
B
C
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
1. Attach the crossbar (DD) to the outlet box
(not included) with the long mounting
screws (CC).
1
Hardware Used
Long mounting screw
Crossbar
x
2
x
1
3
CC
DD
BB
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers
(not included), black to black (power) and
white to white (neutral). Attach copper
wire to ground wire. Helpful hint:
If necessary, attach copper ground wire
to grounded outlet box.
2
3
BB
3. Attach wire nuts (BB).Tape wire nuts (BB)
and wires together.
Print in china
Hardware Used
x
Wire nut
5
DD
CC
4. Align the 2 screws(AA) through the holes
of the back plate, and fix them with screw
nuts
Hardware Used
4
AA
DD
A
DD
AA
Long mounting screw
Crossbar
x 2
x 1
6. Install light bulb (not included). Use three
standard-base bulbs.
6
5. Remove socket ring (C). Install shade (B)
over socket of fixture (A), then secure with
socket ring (C). A
B
C
A
  • Page 1 1
  • Page 2 2

TRUE FINE TD20027W User manual

Category
Motorcycle Accessories
Type
User manual

TRUE FINE TD20027W is a vanity lighting fixture designed to illuminate your bathroom mirror with bright, even light. It features a sturdy metal construction, a stylish chrome finish, and three standard-base bulb sockets, allowing you to customize the brightness and warmth of the light to your preference. Installation is straightforward and can be completed in approximately 25 minutes with basic tools and the included hardware.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI