pedestal Wall Bar Minimalist Shelf User manual

Assembly

Guide

Wall Bar

755 mm

5 mm

Parts

 x  x mm screw

 x mm Universal plugs

WARNING!

Incorre assembly and inallation of the Wall Bar can cause damage to the aached equipment and its surroundings. The included

universal plugs and screws may, in rare inances, not be suitable for your wall. Use screws and plugs suitable for your walls. If you are

uncertain, seek professional advice.

Place the large hole over the screw and gently push down the Wall Bar until it locks in place.

Adju the screw accordingly to make sure the bar seats securely in the slot.

Mark two points, using a ruler and a irit level. Diance 755 mm.

Drill two holes Ø6 mm, and insert the included wall plugs, then the screws.

The screws should be placed with a diance of approximately 5mm, from the head to the wall.