2. AcraDyne
  3. LIT MAN177 Gen IV Controller
LIT MAN177 Gen IV Controller

AcraDyne LIT MAN177 Gen IV Controller User guide

  • Hello! I've reviewed the AcraDyne Gen IV Controller Quick Start Guide. This document provides a step-by-step guide on how to connect the necessary cables and power up the controller, as well as how to import default PSets which can be used to customize settings. I'm ready to assist you with any questions you have.
  • What are the initial connection steps?
    How do I import default PSets?
    Can I add more PSets?
Gen IV Controller
Quick Start Guide
A. Connect the tool cable to the Gen IV
Controller
B. Connect the
power cord.
C. Connect the Redundant Earth ground
(required).
Consult manual for further details on
proper grounding of controller if needed.
Step 1: Make Connections
On the Controller's Main Display Menu press
This
will import three default PSets that can
now be edited. More PSets can be added
by using the Add and Edit buttons.
Step 3: Import Default PSets
Note: When connecting
through the web browser
interface, this process
is the same. Refer to
the Gen IV controller
manual for connection
instructions. For the
complete Gen IV manual
go to www.aimco-global.
com/manuals.
QUALITY • INNOVATION • SERVICE LIT-MAN177_Gen IV Quick Start
06-21-22
©2022 AIMCO
CORPORATE HEADQUARTERS
10000 SE Pine Street
Portland, Oregon 97216
Phone: (503) 254–6600
Toll Free: 1-800-852-1368
AIMCO CORPORATION DE MEXICO SA DE CV
Ave. Cristobal Colon 14529
Chihuahua, Chihuahua. 31125
Mexico
Phone: (01-614) 380-1010
Step 2:
Power on the
Controller
www.aimco-global.com
AIMCO Technical Support Call Guide
Service/Repair
Service Training Steve Shepard
Direct: (503) 262-3475
(503) 254-6600, ext. 175
(800) 852-1368, ext. 175
Ken Maio
Direct: (503) 262-3406
(503) 254-6600, ext. 206
(800) 852-1368, ext. 206
Service/Repair AcraDyne Tools Gregg Walters
(503) 262-3420
(503) 254-6600, ext. 354
(800) 852-1368, ext. 354
Kent Wall
Direct: (503) 262-3447
(503) 254-6600, ext. 147
(800) 852-1368, ext. 147
Service/Repair Electronics Greg Charland
Direct: (503) 262-3497
(503) 254-6600, ext. 207
(800) 852-1368, ext. 207
Mike Sims
(503) 254-6600, ext. 208
(800) 852-1368, ext. 208
Service/Repair Pneumatic Tools Gregg Walters
(503) 262-3420
(503) 254-6600, ext. 354
(800) 852-1368, ext. 354
Kent Wall
Direct: (503) 262-3447
(503) 254-6600, ext. 147
(800) 852-1368, ext. 147
Technical Assistance
AcraDyne Tool Performance
and Specications Steve Shepard
Direct: (503) 262-3475
(503) 254-6600, ext. 175
(800) 852-1368, ext. 175
Dennis Frey
(503) 254-6600, ext. 176
(800) 852-1368, ext. 176
Ken Maio
Direct: (503) 262-3406
(503) 254-6600, ext. 206
(800) 852-1368, ext. 206
Electronics Performance
and Specications
Pneumatic Tool Performance
and Specications
Rev 06-21-22
/