Ubiquiti N-SW is a compact and versatile networking device designed for various outdoor applications. It features four 10/100/1000 Ethernet ports with passive PoE output, enabling you to connect and power compatible devices such as IP cameras, wireless access points, and VoIP phones. With its rugged construction and support for surge protection, the N-SW can withstand harsh outdoor conditions, making it ideal for deployments in remote or challenging environments.
Ubiquiti N-SW is a compact and versatile networking device designed for various outdoor applications. It features four 10/100/1000 Ethernet ports with passive PoE output, enabling you to connect and power compatible devices such as IP cameras, wireless access points, and VoIP phones. With its rugged construction and support for surge protection, the N-SW can withstand harsh outdoor conditions, making it ideal for deployments in remote or challenging environments.
We recommend that you protect your networks from harmful outdoor
environments and electrostatic discharge phenomena with Ubiquiti's
Industrial Grade Shielded Ethernet Cable. For more details, visit: ui.com/toughcable
N-SW Quick Start Guide
NanoSwitch metal strips (2)
Tapping screw
Category 5 (or higher) shielded cabling with a drain wire must be used on all
Ethernet connections and must be connected to the AC ground of the PoE.
7mm socket wrench or screwdriver
Surge protection must be used on all outdoor installations. We recommend
that you use two surge protectors (model ETH-SP-G2), one near the N-SW
and the other at the entry point of the building. The ETH-SP-G2 will absorb
surge voltages and safely discharge them to the ground.
Mounting hardware and drain line are not included.
Drill with 4.5 mm bit
Wall mounting (2)
screws (head ÿ 5 mm) (1)
drain wire, optional (ÿ 12 AWG, ÿ 1 m)
Cables
pole mount
Package content
installation requirements
N-SW Quick Start Guide
Device overview
N-SW Quick Start Guide
Power LEDs
The LED indicator will light blue when the device is connected to a power source.
Drain wire connection (optional)
The RJ45 port supports 10/100/1000 Ethernet connections and 24V passive PoE outputs and 2 pairs
of switch power. For a maximum power consumption of 30 W, we recommend power supply with the
PoE adapter POE-24-30W-G-WH (not included).
PoE output (ports 1 - 3)
WARNING: Do not supply PoE output greater than 24 W total (24 V, 1 A) per port or 30 W
total output; otherwise it will damage the NanoSwitch.
LED of PoE
Puerto PoE In
WARNING: PoE is always active. Before connecting a device to a PoE output,
make sure that the device supports passive PoE and the supplied voltage.
24V active PoE
The NanoSwitch must be connected to the ground of one of the following
If you use a drain wire to connect the NanoSwitch, secure it to the ground point with the self-tapping screw
and nut.
ground connection point
link established
Link LEDs
Use the self-tapping screw to connect the NanoSwitch directly to a grounding pole or structure.
Green
ways:
Green
RJ45 ports support 10/100/1000 Ethernet connections and provide 24V passive PoE transmission
and 2 output PoE transmission options up to 30W.
Blinking indicates activity
Use the machine screw and nut to attach a drain wire (not included) that is connected to a remote
ground block or structure.
N-SW Quick Start Guide
Device installation
N-SW Quick Start Guide
pole mount
Follow the appropriate steps for your installation:
At the installation site, attach the other end of the drain stud to an earth ground,
pole, or ground bar.
"Wall Mount"
machine and nut:
"Pole Mount"
1. If you are using the self-tapping screw for the ground connection, remove the screw
N-SW Quick Start Guide
2.
3.
N-SW Quick Start Guide
4.
5.
6.
Note: If you are using a drain wire for ground connection, go to the N-SW Quick Start
Guide section “Connecting Power”.
1.
Note: Screws not included.
N-SW Quick Start Guide
wall mount
N-SW Quick Start Guide
2.
N-SW Quick Start Guide
3.
N-SW Quick Start Guide
4.
N-SW Quick Start Guide
5.
N-SW Quick Start Guide
6.
N-SW Quick Start Guide
Power connection
WARNING: PoE is always active. Before connecting a device to a PoE output,
make sure that the device supports passive PoE and the supplied voltage.
N-SW Quick Start Guide
Weight
196,4 x 93,5 x 32,4 mm ( 7,73 x
3,68 x 1,28")
271 g
(9,6 oz)
N-SW
Dimensions (not
including mounting)
Specifications
ethernet connection
electrical safety information
limited warranty
safety instructions
1.5W
Passive PoE voltage range
CE, FCC, IC
2. This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
Certifications
white polycarbonate
Passive PoE Maximum Power Per Port
in Watts
total maximum power in watts of
feeding method
From -30° C to 70°
C (from -22° F to 158° F)
WARNING: Do not use this product in a location where it may be submerged in water.
2. Pay attention to all warnings.
typical power consumption
(4) Ethernet at 10/100/1000 Mbps
21.6 - 30 V
30W
material characteristics
ESD/EMP protection
WARNING: Avoid using this product during a lightning storm. There is a remote possibility of an electrical
discharge caused by lightning.
N-SW
1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer's label.
Connection to a power source other than those specified may result in malfunction, equipment damage, or fire
hazard if limitations are not followed.
4 Gbps
24 V, 2 pairs, 1 A per port (24 W)
±24 kV air, ±24 kV contact
5 to 95% non-condensing
24 V, 2 pairs, 1 A for 3 ports (30 W)
3. Only use the devices or accessories indicated by the manufacturer.
Passive PoE
Interfaces de red
Operating temperature
Non-blocking total line rate
2-Pair 24V Passive PoE
operating humidity
1. Read, follow and save these instructions.
maximum power consumption
N-SW Quick Start Guide
Compliance
1. This device may not cause harmful interference, and 2. This
device must accept any interference, including interference that may
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
ui.com/support/warranty
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
Warning: This equipment complies with Class A of CISPR 32. In a residential
environment, it may cause radio interference.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to protect the equipment, to the
extent possible, from harmful interference when it is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
may cause undesired operation.
Declaration of conformity
The CE marking of this product indicates that the product complies with all applicable
directives.
N-SW Quick Start Guide The limited
warranty requires arbitration to resolve disputes on a case-by-case basis and, where
applicable, specifying arbitration instead of jury trials or class actions.
CAN ICES-3(A)/NMB-3(A)
FCC
CE marked
Australia and New Zealand
ISED from Canada
WEEE Compliance Statement
© 2022 Ubiquiti Inc. All rights reserved.
N-SW Quick Start Guide
online resources
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
Ubiquiti N-SW is a compact and versatile networking device designed for various outdoor applications. It features four 10/100/1000 Ethernet ports with passive PoE output, enabling you to connect and power compatible devices such as IP cameras, wireless access points, and VoIP phones. With its rugged construction and support for surge protection, the N-SW can withstand harsh outdoor conditions, making it ideal for deployments in remote or challenging environments.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ubiquiti UniFi AC Mesh Quick start guide
-
-
Ubiquiti NBE-5AC-Gen2 Quick start guide
-
-
-
-
-
Ubiquiti Loco5AC User guide
-
-