AMX RMS User manual

Brand: AMX

Model: RMS

Type: User manual

This manual is also suitable for

IP Link Interface RMS

AMX RMS offers a range of features for monitoring and managing Extron “IP Link” controllers. Here's a glimpse of its capabilities:

Centralized Monitoring: Keep track of Extron devices and their status from a single platform.
Room-Based Organization: Each connected IP Link device appears as a "room" within MeetingManager and AssetManager, providing a clear overview of your meeting spaces.
Device Management: Configure Extron devices remotely, access their setup and info pages, and even control them via Global Viewer (for Internet Explorer on PC only).
Event Monitoring: Track events and receive alerts for changes in device status, ensuring prompt attention to any issues.

AMX RMS offers a range of features for monitoring and managing Extron “IP Link” controllers. Here's a glimpse of its capabilities:

Centralized Monitoring: Keep track of Extron devices and their status from a single platform.
Room-Based Organization: Each connected IP Link device appears as a "room" within MeetingManager and AssetManager, providing a clear overview of your meeting spaces.
Device Management: Configure Extron devices remotely, access their setup and info pages, and even control them via Global Viewer (for Internet Explorer on PC only).
Event Monitoring: Track events and receive alerts for changes in device status, ensuring prompt attention to any issues.

Quick Start Guide

RMS IP Link Interface

Overview

The RMS IP Link Interface module enables the monitoring of Extron “IP

Link” controllers via RMS solutions. Once the module is loaded in a NetLinx

master, each connected IP Link device reports as a “room” within

MeetingManager and AssetManager. While you can use any NetLinx

master, the module was designed towards the NI-700.

A NetLinx master supports 12 Extron IP Link devices.

Before You Begin

1. Confirm your Extron devices are properly installed per their

documentation.

2. Configure your Extron devices with the latest version of Global

Configurator; the file is available from Extron.

3. Connect your NetLinx master and confirm you are running firmware

version 320 or higher.

4. Install the RMS server using either MeetingManager or

AssetManager. Refer to the application documentation for details.

5. Download the RMS IP Link Interface .TKN file from

amx.com/resource.management.asp.

6. If you do not currently have FileTransfer 2.0, download the application

from www.amx.com.

Step 1: Loading The Extron .TKN File to Your NetLinx Master

1. Launch FileTransfer 2.0, click the Add command button to open the

Select Files For File Transfer dialog.

2. Open the Other tab. This tab consists of the different types of files that

can be transferred to the Master or System devices on the bus.

3. Select the file type .TKN.

4. Click the Add button. This invokes the Open dialog, with the Files of

Ty pe selection already set to .TKN.

5. In the Open dialog, locate and select the .TKN file that you want to

add.

6. Click Open to add the selected file to the Files To Send queue.

7. Configure the communication settings for the file in the list. Consult the

FileTransfer 2.0 Help file for your specific settings.

8. Specify the device-file mapping information for the file in the list.

Consult the FileTransfer 2.0 Help file for setting device information.

9. Click the Send command button. This initiates the transfer of every file

listed in the Transfer (Send) List, in the order in which they are listed

(top to bottom).

10. The progress and status of each file transfer is indicated in the

Transfer Status Window.

Note: If you are running a Telnet session the error, “Could not validate the

module license” appears. This error is expected and appropriate at this

time.

Step 2: Obtain An RMS IP Link Interface Module License from

AMX

Contact AMX customer support to receive your RMS IP Link Interface

module license. You need to provide the serial number for the NetLinx

master where the module will reside.

To obtain the serial number, Telnet to the NetLinx master and enter show

devices at the prompt.

Step 3: Activate The RMS IP Link Interface Module on Your

NetLinx Master

1. Using your web browser, open the web interface for the NetLinx

master by typing in the IP address for the master in the address field.

2. Click Manage License under System Settings in the navigation menu

to open the Manage License window.

FIG. 1 illustrates the navigation menu.

3. Type in the Product ID number and Key provided to you by AMX in the

Add New License Key section. Do not include the dashes when typing,

they are already provided. See FIG. 2.

4. Click Update.

5. Click on Manage License in the navigation menu to verify the license

is registered with the NetLinx master.

6. Reboot the NetLinx master at this time.

7. Return to the web interface for the NetLinx master after the reboot is

complete.

8. Click Manage Other Devices under System Settings to open the

Manage Other Devices page.

9. Within the Device Configuration Pages section, click the plus (+) next

to Extron to list all available Extron devices. See FIG. 3.

The first default link name is Extron, RMS Device - 41001.

Extron Device Links

Also provided on this page are links to Extron’s Default Web Page and

Global Viewer.

• Default Web Page - The setup and info pages for the Extron device.

IP and MAC address for the Extron device is available on this page.

You can also set the date and time for the device.

• Global Viewer - This is the device control page. You can turn a

projector on or off, see lamp hours, and other administrative features.

Global Viewer can only be viewed by Internet Explorer on a PC.

Click either to open. See FIG. 4.

FIG. 1

NetLinx Master Navigation Menu

FIG. 2 Manage License Window - Add New License Key Section

FIG. 3 NetLinx Master Navigation Menu with Extron Device

FIG. 4 Extron Device Links

Opens the Manage License window

Available Extron device. The nomenclature

is Device Type : IP Address

Extron Connection Settings

are not yet established.

AMX Corporation reserves the right to alter specifications without notice at any time.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-XXXX

REV: XX

93-3002-30

REV: A

Step 4: Establish Extron Connection Settings

1. Click on Extron, RMS Device - 41001 to open the Extron

Connection Settings window.

2. Within the Modify Extron Connection Settings (FIG. 5) section:

• Enter the IP address for the RMS Server.

• Enter the RMS Server Port number.

• Enter the IP address for the Extron device.

• If different than the default settings, provide the HTTP and Telnet port

numbers. Changing the port assignments in this window will not

change what is set on the Extron device.

• If a password is used on the Extron device you must provide it here.

3. Click Save and the web interface window closes. In the event you

receive an error, return to the Extron Connection Settings window

and confirm your settings.

4. To verify the connection status, return to the Extron Connection

Settings window and check within the Modify Extron Connection

Settings section.

Step 5: Working with RMS Applications

Open an Administrator session in either MeetingManager or

AssetManager.

If the Extron Device does not immediately appear as an unassigned room,

click Hot List within the AssetManager/MeetingManager navigation menu

and select the Extron device.

RMS detects and populates based on what is attached to the Extron

device. The room name is designated by the Extron device. Neither RMS

applications offer control features to items attached to Extron devices,

monitoring only.

One module license per Extron device and each device constitutes a room

within RMS.

Click on Manage NetLinx Systems to view your Extron device. Shown in

FIG. 6.

Viewing the Extron device Room displays everything you have connected

to the Extron device and its status information.

For more information concerning configuration and device management,

consult either the MeetingManager or AssetManager Administrator’s

Guide, available for download from www.amx.com.

FIG. 5

Extron Connection Settings Window

Password/Password Confirm - If a password

is set at the Extron device, it is necessary

to enter it here and confirm.

Telnet Port - If the Telnet port for the Extron

device is different than the default value,

enter it here.

HTTP Port - If the HTTP port for the Extron

device is different than the default value,

enter it here.

IP Address - Enter the IP address for the

Extron device here.

The current status of the Extron device

module is listed here. In this example the

device is not connected.

Server IP Address - Enter the IP address for

the RMS server.

Server Port - Enter the port number for the

RMS server. The default is already provided.

FIG. 6 Manage NetLinx Systems

FIG. 7 Extron Device Room

Though it appears as a NetLinx system, these fields are now

populated by the Extron device.

AMX RMS User manual

Brand: AMX

Model: RMS

Type: User manual

This manual is also suitable for

IP Link Interface RMS

AMX RMS offers a range of features for monitoring and managing Extron “IP Link” controllers. Here's a glimpse of its capabilities:

Centralized Monitoring: Keep track of Extron devices and their status from a single platform.
Room-Based Organization: Each connected IP Link device appears as a "room" within MeetingManager and AssetManager, providing a clear overview of your meeting spaces.
Device Management: Configure Extron devices remotely, access their setup and info pages, and even control them via Global Viewer (for Internet Explorer on PC only).
Event Monitoring: Track events and receive alerts for changes in device status, ensuring prompt attention to any issues.

Download PDF

report

AMX RMS User manual

This manual is also suitable for

AMX RMS User manual

Related papers

Other documents