FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Includes hot and cold temperature indicators
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, ICC A117.1
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
LEVEL™
Two Handle Widespread
Lavatory Faucet Trim
Models: T6110 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
Lift
Rod
1-11/32"
(34mm)
QUICK CONNECT
HOSE ASSEMBLY
2-1/4” (57mm) MAX.
DECK THICKNESS
ÿÿ
5151
(78.3mm)
(48mm)
(8.5mm)
1-15/16”
(49mm)
8”
(204mm)
(69mm)
(40mm)
(51mm)
(177mm)
58?58?
236236
ÿÿ
.5
2
4
2
5
.4
(25.4mm)
(90mm)
58˚
(236mm)
3-5/8”
(92mm)
1-1/2"
2-11/16"
3-1/16"
1-7/8"
3-1/2"
9-3/16"
1"
5/16"
6-15/16"
2"
Specifications
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
Rev. 3/09
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI