Greenheck 482904 Miami-Dade NOA Operating instructions

Type
Operating instructions
®
Document 482904
Miami-Dade Notice of Approval (NOA)
Installation Guide for Models FJC and USF
NOA Installation Guide 1
®
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with these instructions will result in voiding of the product warranty and may
result in personal injury and/or property damage.
Installation methods for Greenheck FJC-300 Series fans with Miami-Dade NOA Certification
per NOA No. 17-0307.01
Concrete Deck Anchoring
Use
3
8 inch (10 mm) diameter SS Kwik bolt TZ wedge anchor,
316 stainless steel
Effective embedment depth: 2 inch (51 mm) (min.)
Install depth: 2.313 inch (59 mm) (min.)
Edge distance: 6 inch (152 mm) (min.)
Spacing: 4.50 inch (114 mm) (min.)
Min. slap thick: 4 inch (102 mm) normal wt., cracked
Compressive strength: F’C=3000 PSI
Install per manufacturer’s instructions
Steel Deck Anchoring
Use
5
16 inch (8 mm) diameter SS self-drilling/self-tapping
fasteners or thru bolts
300 Series SS, condition CW,
FY = 65 KSI
0.105 inch (3 mm) thread engagement (min.)
Steel FY = 33 KSI (min.)
Timber Anchoring
Use
1
2 inch (13 mm) diameter SS lag bolts (FY = 65 KSI)
Southern pine (G = 0.55 min.)
Predrill as recommended
Penetration = 1.75 inch (45 mm)
1.50 inch (38 mm) of threads to be engaged into wood (min.)
Spacing: 3 inch (76 mm) (min.)
Edge distance: 1 inch (25 mm) (min.)
End distance: 6 inch (152 mm) (min.)
Curb Fasteners
Unit
Concrete
Deck
Anchoring
Steel
Anchoring
Thru Bolts
Steel
Anchoring
Self-Drill/Tap
Timber
Anchoring
End Side End Side End Side End Side
FJC-306
2
5
3
6
3
6
3
6
FJC-307
FJC-308
FJC-309
FJC-310
FJC-312
3
FJC-313
FJC-315
FJC-316
6
FJC-318
FJC-320
7 7
7
FJC-322
7 4
FJC-324
4 4 8
Concrete
Concrete Deck Anchoring
Steel Deck Anchoring
Anchor
Thru Bolts
Building
member
Building
member
Fastener
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Fastener
Lag bolt
Timber Anchoring
Self-Drill/Tap
One fastener in
each corner
SIDE: Mininum
number of fasteners
equally spaced
1.75 inch maximum distance
from vertical face of curb
END: Minimum
number of fasteners
equally spaced
Concrete
Concrete Deck Anchoring
Steel Deck Anchoring
Anchor
Thru Bolts
Building
member
Building
member
Fastener
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Fastener
Lag bolt
Timber Anchoring
Self-Drill/Tap
One fastener in
each corner
SIDE: Mininum
number of fasteners
equally spaced
1.75 inch maximum distance
from vertical face of curb
END: Minimum
number of fasteners
equally spaced
Concrete
Concrete Deck Anchoring
Steel Deck Anchoring
Anchor
Thru Bolts
Building
member
Building
member
Fastener
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Fastener
Lag bolt
Timber Anchoring
Self-Drill/Tap
One fastener in
each corner
SIDE: Mininum
number of fasteners
equally spaced
1.75 inch maximum distance
from vertical face of curb
END: Minimum
number of fasteners
equally spaced
Concrete
Concrete Deck Anchoring
Steel Deck Anchoring
Anchor
Thru Bolts
Building
member
Building
member
Fastener
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Fastener
Lag bolt
Timber Anchoring
Self-Drill/Tap
One fastener in
each corner
SIDE: Mininum
number of fasteners
equally spaced
1.75 inch maximum distance
from vertical face of curb
END: Minimum
number of fasteners
equally spaced
482904 • NOA Installation Guide, Rev. 1, September 2017 Copyright 2017 © Greenheck Fan Corporation2
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Concrete Deck Anchoring
Use six
3
8 inch (10 mm) diameter SS Kwik bolt TZ wedge
anchors, 316 stainless steel
Effective embedment depth: 2 inch (51 mm) (min.)
Install depth: 2.313 inch (59 mm) (min.)
Edge distance: 6 inch (152 mm) (min.)
Spacing: 4
1
2 inch (114 mm) (min.)
Min. slap thick: 4 inch (102 mm) normal wt., cracked
Compressive strength: F’C=3000 PSI
Install per manufacturer’s instructions
Steel Deck Anchoring
Use six
5
16 inch (8 mm) diameter SS self-drilling/self tapping
fasteners or thru bolts
300 Series S.S., condition CW,
FY = 65 KSI
0.105 inch (3 mm) thread engagement (min.)
Timber Anchoring
Use six
1
2 inch (13 mm) diameter SS lag bolts
(FY=65 KSI)
Southern pine (G=0.55 min.)
Predrill as recommended
Penetration = 1.75 inch (45 mm)
1.50 inch (38 mm) of threads to be engaged into wood (min.)
Spacing: 3 inch (76 mm) (min.)
Edge distance: 1 inch (25 mm) (min.)
End distance: 6 inch (152 mm) (min.)
Installation methods for Greenheck USF-300 Series fans with NOA Certification per
NOA No. 17-0307.02
Concrete Deck Anchoring
Anchor
Equipment Supports
Use 1/2 inch diameter
316 SS lag bolts
(two per support)
Ten anchors per support
(wood, steel or concrete)
Isolator bolt 1/2-13
(4 places)
Two anchors per isolator
(wood, steel or concrete)
Direct Mount With Spring Isolators
Roof truss
1/8 inch thread or
12 ga. min.
Lag bolt
Fastener
Steel Deck Anchoring
Timber Anchoring
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Concrete
Concrete Deck Anchoring
Anchor
Equipment Supports
Use 1/2 inch diameter
316 SS lag bolts
(two per support)
Ten anchors per support
(wood, steel or concrete)
Isolator bolt 1/2-13
(4 places)
Two anchors per isolator
(wood, steel or concrete)
Direct Mount With Spring Isolators
Roof truss
1/8 inch thread or
12 ga. min.
Lag bolt
Fastener
Steel Deck Anchoring
Timber Anchoring
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Concrete
Concrete Deck Anchoring
Anchor
Equipment Supports
Use 1/2 inch diameter
316 SS lag bolts
(two per support)
Ten anchors per support
(wood, steel or concrete)
Isolator bolt 1/2-13
(4 places)
Two anchors per isolator
(wood, steel or concrete)
Direct Mount With Spring Isolators
Roof truss
1/8 inch thread or
12 ga. min.
Lag bolt
Fastener
Steel Deck Anchoring
Timber Anchoring
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Concrete
Concrete Deck Anchoring
Anchor
Equipment Supports
Use 1/2 inch diameter
316 SS lag bolts
(two per support)
Ten anchors per support
(wood, steel or concrete)
Isolator bolt 1/2-13
(4 places)
Two anchors per isolator
(wood, steel or concrete)
Direct Mount With Spring Isolators
Roof truss
1/8 inch thread or
12 ga. min.
Lag bolt
Fastener
Steel Deck Anchoring
Timber Anchoring
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Concrete
Equipment Supports
Direct Mount with Spring Isolators
Concrete Deck Anchoring
Anchor
Equipment Supports
Use 1/2 inch diameter
316 SS lag bolts
(two per support)
Ten anchors per support
(wood, steel or concrete)
Isolator bolt 1/2-13
(4 places)
Two anchors per isolator
(wood, steel or concrete)
Direct Mount With Spring Isolators
Roof truss
1/8 inch thread or
12 ga. min.
Lag bolt
Fastener
Steel Deck Anchoring
Timber Anchoring
Wood timber
Min. 4 inch (101.6 mm)
nominal thickness
Concrete
  • Page 1 1
  • Page 2 2

Greenheck 482904 Miami-Dade NOA Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI