Dell UP2716DA User guide

Model:UP2716DA

Regulatory model: UP2716Dt

Dell UltraSharp

UP2716DA

User’s Guide

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

copyright and intellectual property laws.

Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions.

All other marks and names mentioned herein may be trademarks of their respective companies.

2020 – 11 Rev. A00

Contents

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Your Monitor ..................................... 6

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Monitor Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

LCD Monitor Quality and Pixel Policy. . . . . . . . . . . . . . . . . . . . . . .21

Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Handling and moving your display . . . . . . . . . . . . . . . . . . . . . . . 24

Maintenance guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setting Up the Monitor.................................. 26

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using the Tilt, Swivel, and Vertical Extension . . . . . . . . . . . . . . . . . 29

Adjusting the Rotation Display Settings of Your System . . . . . . . . . . 30

Connecting Your Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Organizing Your Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Removing the Monitor Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Contents | 3

4 | Contents

Operating the Monitor .................................. 35

Turning on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using the Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . . . . . . . . 38

Troubleshooting ....................................... 57

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix .............................................. 63

FCC Notices (U.S. only) and Other Regulatory Information . . . . . . . . 63

Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

EU product database for energy label and product information sheet . . 63

| 5

Safety Instructions

For displays with glossy bezels the user should consider the placement of the display as

the bezel may cause disturbing reflections from surrounding light and bright surfaces.

WARNING: Use of controls, adjustments, or procedures other than those

specified in this documentation may result in exposure to shock, electrical

hazards, and/or mechanical hazards.

For information on safety instructions, see the Safety, Environmental, and Regulatory

Information (SERI).

6 | About Your Monitor

About Your Monitor

Package Contents

Your monitor ships with the components shown below. Make sure that you have

received all the components and contact Dell if something is missing.

NOTE: Some items may be optional and may not ship with your monitor.

Somefeatures or media may not be available in certain countries.

Monitor

Stand riser

Stand base

Power cable (varies by country)

About Your Monitor | 7

USB 3.0 upstream cable (enables

the USB ports on the monitor)

DP cable (mDP to DP)

• Quick Setup Guide

• Safety and Regulatory Information

• Factory Calibration Report

Product Features

The Dell UltraSharp UP2716DA monitor has an active matrix, thinfilm transistor (TFT),

liquid crystal display (LCD), and LED backlight. The monitor features include:

• 68.47 cm (27-inch) active area display (Measured diagonally) 2560 x 1440

resolution, plus full-screen support for lower resolutions.

• Tilt, swivel, pivot and vertical extension adjustment capabilities.

• Removable pedestal and Video Electronics Standards Association (VESA™) 100 mm

mounting holes for flexible mounting solutions.

• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier

set up with an elegant viewing experience.

• Extensive digital connectivity with DP, mDP, HDMI, and USB 3.0 helps future-proof

your monitor.

• High Dynamic Contrast Ratio (2,000,000:1) .

• Supports major industry standards: 100% AdobeRGB, 100% sRGB, 100% REC709,

98% DCI-P3.

• Plug and play capability if supported by your system.

• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

• Security lock slot.

• Asset Management Capability.

• RoHS compliant.

• BFR/PVC Free monitor (excluding cables).

• TCO Certified Displays.

• Arsenic-Free glass and Mercury Free for Panel only.

• ≤ 0.3 W in Standby Mode.

• Energy Gauge shows the energy level being consumed by the monitor in real time.

8 | About Your Monitor

Identifying Parts and Controls

Front view

Front panel controls

Label Description

1 Function buttons (For more information, see Operating the Monitor)

2 Power on/off button (with LED indicator)

Solid white light indicates the monitor is turned on and functioning normally.

Blinking white light indicates the monitor is in Standby Mode.

About Your Monitor | 9

Back View

Label Description Use

1 VESA mountiong holes (100 mm

x 100 mm-behind attached VESA

cover)

Wall mount monitor using VESA-

compatible wall mount kit (100 mm x 100

mm).

2 Regulatory label Lists the regulatory approvals.

3 Stand release button Release stand from monitor.

4 Security lock slot Secures monitor with security cable lock

(sold separately).

5 Barcode, serial number, and Service

Tag label

Refer to this label if you need to contact

Dell for technical support.

6 Dell soundbar mounting slots Attaches the optional Dell soundbar.

NOTE: Please remove the plastic strip

covering the mounting slots before affixing

the Dell Soundbar.

Dell soundbar is sold separately.

7 Cable management slot Use to organize cables by placing them

through the slot.

10 | About Your Monitor

Side View

Bottom View

Label Description Use

1 AC power connector To connect the monitor power cable.

2a HDMI 1 connector

Connect your computer with HDMI cable devices .

2b HDMI 2 connector

3 DP connector (in) Connect your computer with DP cable.

4 mDP connector (in) Connect your computer with mDP to DP cable.

5 DP connector (out) DP output for MST (multi-stream transport) capable

monitor. DP 1.1 monitor can only be connected as

the last monitor in the MST chain. To enable MST,

refer to instruction on section “Connecting the

Monitor for DP MST Function”.

NOTE: Remove the rubber plug when use DP out

connector.

USB downstream port

Port with lightning icon is for BC 1.2

About Your Monitor | 11

6 Audio line-out port Connect speakers to playback audio coming

through HDMI or DP audio channels.

Only supports 2-channel audio.

NOTE: The audio line-out port does not support

headphones.

WARNING: Excessive sound pressure from

earphones or headphones can cause hearing

damage or loss.

7a USB upstream 1 port Connect the USB cable that comes with your

monitor to the computer. Once this cable is

connected, you can use the USB downstream

connectors on the monitor.

7b USB upstream 2 port

8 USB downstream ports (2) Connect your USB device. You can only use this

connector after you have connected the USB cable

to the computer and USB upstream connector on

the monitor.

9 Stand lock Lock the stand to the monitor using a M3 x 6 mm

screw (screw not included).

Monitor Specifications

Flat Panel Specifications

Model

Screen type Active matrix - TFT LCD

Panel type In-plane switching (IPS)

Viewable image:

Diagonal 68.47 cm (27 inches)

Active Area:

Horizontal 596.74 mm (23.49 inches)

Vertical 335.66 mm (13.21 inches)

Area 200301.75 mm

2

(310.47 inches

2

)

Pixel pitch 0.2331 mm x 0.2331 mm

Viewing angle:

Horizontal 178° (typical)

Vertical 178° (typical)

Luminance output 300 cd/m² (typical)

Contrast ratio 1000 to 1 (typical)

2,000,000 to 1

(dynamic contrast on)

12 | About Your Monitor

Faceplate coating Anti-glare treatment of the front polarizer (3H)

Backlight LED

Response Time 14 ms (typical),

6 ms (fast mode)

Color depth 1.07 Billion colors

Color gamut 100% AdobeRGB

100% sRGB

100% REC709

98% DCI-P3

Resolution Specifications

Horizontal scan range 30 kHz to 88 kHz

Vertical scan range 50 Hz to 75 Hz

Maximum preset resolution 2560 x 1440 at 60 Hz

Video display capabilities

(DP & HDMI playback)

480i, 480p, 576i, 576p, 720p, 1080i, 1080p, QHD

Preset Display Modes

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(Horizontal/

Vertical)

720 x 400 31.5 70.0 28.3 -/+

VESA, 640 x 480 31.5 60.0 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.0 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024

64.0 60.0 108.0 +/+

VESA, 1280 x 1024

80.0 75.0 135.0 +/+

VESA, 1600 x 1200

75.0 60.0 162.0 +/+

VESA, 1920 x 1080 67.5 60.0 148.5 +/+

VESA, 2048 x 1080 26.27 24 58.22 +/-

VESA, 2048 x 1080 66.58 60 147.16 +/-

About Your Monitor | 13

VESA, 2560 x 1440 88.8 60.0 241.5 +/-

MST Multi-Stream Transport (MST) Modes

MST Source Monitor Maximum number of external monitor that can be

supported

2560 x 1440/60 Hz 1920 x 1200/60 Hz 1920 x 1080/60 Hz

2560 x 1440/60 Hz 1 2 2

NOTE: Maximum external monitor resolution supported is 2560x1440 60Hz only.

Electrical Specifications

Video input signals • Digital video signal for each dierential line.

Per dierential line at 100 ohm impedance.

• DP/HDMI signal input support

Input voltage/ frequency/

current

100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.6 A (maximum)

Inrush current 120 V: 30 A (Max.)

240 V: 60 A (Max.)

Power Consumption 0.3 W (Off Mode)

1

0.3 W (Standby Mode)

1

30.5 W (On Mode)

1

130 W (Max)

2

28.2 W (P

on

)

3

89.3 kWh (TEC)

3

1

As dened in EU 2019/2021 and EU 2019/2013.

2

Max brightness and contrast setting with maximum power loading on all USB ports.

3

P

on

: Power consumption of On Mode measured with reference to Energy Star test

method.

TEC: Total energy consumption in kWh measured with reference to Energy Star test

method.

This document is informational only and reflects laboratory performance. Your product

may perform differently, depending on the software, components and peripherals

you ordered and shall have no obligation to update such information. Accordingly, the

customer should not rely upon this information in making decisions about electrical

tolerances or otherwise. No warranty as to accuracy or completeness is expressed or

implied.

14 | About Your Monitor

Physical Characteristics

Model

Connector type • DP (HDCP 1.4) connector (include DP in

and DP out)

• mDP (HDCP 1.4) connector

• HDMI 1/HDMI 2 (HDCP 1.4) connector

• Audio line-out

• USB 3.0 update stream port connector.

• USB 3.0 down stream port connector x 4.

(Port with lightning icon is for BC

1.2)

Signal cable type

mDP to DP 1.8 M cable.

USB 3.0 1.8 M cable.

Dimensions (with stand)

Height (extended) 540.3 mm (21.27 inches)

Height (compressed) 410.3 mm (16.15 inches)

Width 611.4 mm (24.07 inches)

Depth 200.3 mm (7.89 inches)

Dimensions (without stand)

Height 362.5 mm (14.27 inches)

Width 611.4 mm (24.07 inches)

Depth 51.4 mm (2.02 inches)

Stand dimensions

Height (extended) 433.4 mm (17.06 inches)

Height (compressed) 387.2 mm(15.24 inches)

Width 292.4 mm (11.51 inches)

Depth

200.3 mm (7.89 inches)

Weight

Weight with packaging 9.52 kg (20.99 lb)

Weight with stand assembly and cables 7.42 kg (16.36 lb)

Weight without stand assembly (For wall

mount or VESA mount considerations - no

cables)

4.56 kg (10.05 lb)

Weight of stand assembly 2.55 kg (5.62 lb)

Front frame gloss 5.5 ± 1.5 GU

About Your Monitor | 15

Environmental Characteristics

Model

Temperature:

Operating 0°C to 35°C (32°F to 95°F)

Non-operating –20°C to 60°C (–4°F to 140°F)

Humidity:

Operating 10% to 80% (non-condensing)

Non-operating

5% to 90% (non-condensing)

Altitude:

Operating 5,000 m (16,404 ft) (maximum)

Non-operating 12,192 m (40,000 ft) (maximum)

Thermal

dissipation

443.7 BTU/hour (maximum)

104.07 BTU/hour (On Mode)

16 | About Your Monitor

Pin Assignments

DP connector (in)

Pin number 20-pin side of theconnected signal cable

1 ML3(n)

2 GND

3 ML3(p)

4 ML2(n)

5 GND

6 ML2(p)

7 ML1(u)

8 GND

9 ML1(p)

10 ML0(n)

11 GND

12 ML0(p)

13 CONFIG1

14 CONFIG2

15 AUX CH (p)

16 GND

17 AUX CH (n)

18 Hot Plug Detect

19 Return

20 DP_PWR

About Your Monitor | 17

DP connector (out)

Pin number 20-pin side of theconnected signal cable

1 ML0(p)

2 GND

3 ML0(n)

4 ML1(p)

5 GND

6 ML1(n)

7 ML2(p)

8 GND

9 ML2(n)

10 ML3(p)

11 GND

12 ML3(n)

13 CONFIG1

14 CONFIG2

15 AUX CH(p)

16 GND

17 AUX CH(n)

18 Hot Plug Detect

19 Return

20 DP_PWR

18 | About Your Monitor

mDP connector

Pin number 20-pin side of theconnected signal cable

1 GND

2 Hot Plug Detect

3 ML3 (n)

4 CONFIG1

5 ML3 (p)

6 CONFIG2

7 GND

8 GND

9 ML2 (n)

10 ML0 (p)

11 ML2 (p)

12 ML0 (p)

13 GND

14 GND

15 ML1 (n)

16 AUX (p)

17 ML1 (p)

18 AUX (n)

19 GND

20 DP_PWR

About Your Monitor | 19

HDMI connector

Pin number 19-pin side of theconnected signal cable

1 TMDS DATA 2+

2 TMDS DATA 2 SHIELD

3 TMDS DATA 2-

4 TMDS DATA 1+

5 TMDS DATA 1 SHIELD

6 TMDS DATA 1-

7 TMDS DATA 0+

8 TMDS DATA 0 SHIELD

9 TMDS DATA 0-

10 TMDS CLOCK+

11 TMDS CLOCK SHIELD

12 TMDS CLOCK-

13 CEC

14 Reserved (N.C. on device)

15 DDC CLOCK (SCL)

16 DDC DATA (SDA)

17 DDC/CEC Ground

18 +5 V POWER

19 HOT PLUG DETECT

20 | About Your Monitor

Universal Serial Bus (USB)

This section gives you information about the USB ports available on your monitor.

NOTE: Up to 2 A on USB downstream port (port with lightning icon) with

BC 1.2 compliance devices; up to 0.9 A on the other 3 USB downstream ports.

Your computer has the following USB ports:

• 2 upstream - bottom

• 4 downstream - 2 at left side, 2 at bottom

Power Charging Port - the one on the left side (Port with lightning icon);

supports fast current charging capability if the device is BC 1.2 compatible.

NOTE: The monitor’s USB ports work only when the monitor is on or in the standby

mode. If you turn off the monitor and then turn it on, the attached peripherals may

take a few seconds to resume normal functionality.

Transfer speed Data rate Power consumption

SuperSpeed 5 Gbps 4.5 W (Max., each port)

Hi-Speed 480 Mbps 2.5 W (Max., each port)

Full speed 12 Mbps 2.5 W (Max., each port)

Page is loading ...

Dell UP2716DA User guide

Dell UP2716DA User guide

Related papers

Other documents