BRP ski-doo MX Z 800 HO User manual

Mmc-2005-001 Racing.FH8 Wed Sep 15 15:27:01 2004 Page 1

C M Y CM MY CY CMY K

MMC2005-001_00A.FM 1

2005 RACING HANDBOOK

TABLE OF CONTENTS

Section

CONTACTING THE RACE DEPARTMENT .............................................................................. 01-1

2005 MODELS TECHNICAL DATA.......................................................................................... 02-1

CHASSIS PREPARATION ........................................................................................................ 03-1

SUSPENSION SC-3 SC-4 - RAS.............................................................................................. 04-1

ENGINE PREPARATION .......................................................................................................... 05-1

DRIVE SYSTEM ....................................................................................................................... 06-1

2005 MX Z X 440 ..................................................................................................................... 07-1

2005 MX Z 550 AND 380 FC ................................................................................................... 08-1

2005 800 MOD ENGINE KIT ................................................................................................... 09-1

2004 MX Z X 440 ..................................................................................................................... 10-1

COMPETITION PREPARATION ............................................................................................... 11-1

SERVICE TOOLS...................................................................................................................... 12-1

ACCESSORIES......................................................................................................................... 13-1

KEEPING YOUR MACHINE LEGAL IS YOUR RESPONSIBILITY

Read the rule book and/or contact organization you will be competing in.

WARNING

This information relates to the preparation and use of snowmobiles in competitive events.

Bombardier Inc. disclaims liability for all damages and/or injuries resulting from the improper

use of the contents. We strongly recommend that these modifications be carried out and/or ver-

ified by a highly-skilled professional racing mechanic. It is understood that racing or modifications

of any Bombardier-made snowmobile voids the vehicle warranty and that such modifications

may render use of the vehicle illegal in other than sanctioned racing events under existing federal,

provincial and state regulations.

MMC2005-001_01A.FM 01-1

SECTION 01 - CONTACTING THE RACE DEPARTMENT

RACE DEPARTMENT CONTACTS

U.S. & CDN RACERS (ENGLISH)

Steve Cowing

Competition and Media Relations Manager

24078 Greenway Rd. Unit #4

Forest Lake MN. 55025

Phone: 651 982-6223

Fax:651 982-6225

E-mail: steve.cowi[email protected]

• Race Program

•Race Resumes

• Race Sleds Allocation

• Media Relations

• Press Events

• Dealer Programs

Tom Lawrence

Race Coordinator

7575 Bombardier Court

Wausau WI. 54401

Phone: 715-848-4971

Fax: 715-847-6879

E-mail: tom.lawrence@brp.com

• Technical Support

• Race Schools

• Race Manual

• MPEM Programming

Website: www.ski-doo.com/racingzone

• Race Schedule and Results

NOTE: E-mail is the preferred method of communications throughout the year.

01-2 MMC2005-001_01A.FM

SECTION 01 - CONTACTING THE RACE DEPARTMENT

CDN RACERS (FRENCH SPEAKING RACERS ONLY)

Marcel Imbeault

Race Manager

565, de la Montagne

Valcourt, QC J0E 2L0

Phone: 450-532-2211 Ext. 5479

Fax: 450-532-6175

E-mail: marcel.imbeault@brp.com

• Race Program

•Race Resumes

• Race Sleds Allocation

Hélène Despaties

Race Manager Assistant

565, de la Montagne

Valcourt, QC J0E 2L0

Phone: 450-532-2211 Ext. 5075

Fax: 450-532-6175

E-mail: helene.despa[email protected]

• T.I.P. Sheet Distribution (See T.I.P. Sheet Application on Page 1-3)

Yvon Petit

Race Technician

565, de la Montagne

Valcourt QC. J0E 2L0

Phone: 450-532-2211 Ext. 5803

Fax: 450-532-6175

E-mail: yvon.peti[email protected]

• Technical Support

Website: www.ski-doo.com/racingzone

• Race Schedule and Results

NOTE: E-mail is the preferred method of communications throughout the year.

SECTION 01 - CONTACTING THE RACE DEPARTMENT

MMC2005-001_01A.FM 01-3

Dear Ski-Doo X-Team

during the 2004-05 race season.

Name: City:

Fax: (your complete fax number)

T.I.P.

SHEET

APPLICATION

This form only will be accepted

Last year applications are not valid anymore

To receive the T.I.P. sheets by e-mail, send an e-mail to the following:

and mention to add your name on the tip sheet distribution list

Please add my name to your list of recipients for the T.I.P. sheets to be distributed

Fax to: Hélène Despaties at (450) 532-6175

TECHNICAL INFORMATION POSTING

To receive the T.I.P. sheets by fax, send a fax to the following:

[email protected]

*******

and mention to add your address on the tip sheet distribution list

MMC2005-001_01A.FM 01-3

01-4 MMC2005-001_01A.FM

SECTION 01 - CONTACTING THE RACE DEPARTMENT

O

RDER

FORM

Valcourt Race Dept. DATE: Page 1 of

Race Dept. Parts Order Desk

SHIP TO:

(name & complete address)

DEALER #:

FED. ID #

(US dealer only)

SOCIAL SECURITY #:

(US Racer only)

Need your SS # for custom regulations

PHONE #: FAX #:

PAYMENT: VISA ___ MASTER CARD ___ # __________________________ Ex

p

. Date _______

SHIPPING CONDITIONS: RED: ______ BLUE: _______ GROUND: ______

DESCRIPTION PART # OR CLOTHING PART # QTY B/O

( 3) ONLY FAXED ORDERS WILL BE ACCEPTE

D

(COMPLETELY FILLED)

(2) Phone call orders or shippin

g

requests will not be accepted

Please, read the following important notices

(1) 15% fee will be char

g

ed on returned parts - Written Return Authorization Required

ALL B/O PARTS WILL BE CANCELLED, REORDER AT A LATER DATE

Fax (450) 532-5076

If you are a dealer:

If you are a racer:

( shippin

g

fees will be char

g

ed to you )

[email protected]

SECTION 01 - CONTACTING THE RACE DEPARTMENT

MMC2005-001_01A.FM 01-5

O

RDER

FORM

Race Support Truck DATE: Page 1 of____

Phone : 320-251-2882

SHIP TO:

(name & complete address)

Name:

Number:

Signature:

PHONE #: FAX #:

PAYMENT: VISA ___ MASTER CARD ___ # __________________________ Ex

p

. Date ______

_

SHIPPING CONDITIONS: RED: ______ BLUE: _______ GROUND: ______

DESCRIPTION PART # OR CLOTHING PART # QTY B/O

ALL B/O PARTS WILL BE CANCELLED, REORDER AT A LATER DATE

Fax: 320-251-3733

If you are a dealer:

( shipping fees will be charged to you )

Please, read the following important notice

15% fee will be charged on returned parts - Written Return Authorization Required

MMC2005-001_02A.FM 02-1

SECTION 02 - 2005 MODELS TECHNICAL DATA

TABLE OF CONTENTS 0

MX Z X 440 RACING ................................................................................................................. 02-2

MX Z 600 HO/800 HO ................................................................................................................ 02-5

MX Z 380F/550F......................................................................................................................... 02-10

SUMMIT 600 HO/800 HO .......................................................................................................... 02-14

MACH Z 1000 SDI/SUMMIT 1000 SDI...................................................................................... 02-19

TECHNICAL DATA LEGEND ..................................................................................................... 02-23

02-2 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MX Z X 440 RACING

MODEL MX Z X 440 Racing

ENGINE

Engine type 453

Number of cylinders 2

Bore mm (in) 65.0 (2.56)

Stroke mm (in) 65.8 (2.59)

Displacement cm3(in3)436.7 (26.6)

Maximum power engine speed [1] ±100 RPM 8400

1st/Semi-trapezoidal

Piston ring type

2nd —

New mm (in) 0.4 (.0157)

Ring end gap

Wear Limit mm (in) 1.0 (.040)

New mm (in) 0.04 (.0016)

Ring/piston groove clearance

Wear Limit mm (in) 0.2 (.0079)

New mm (in) 0.10 ±0.016 (.0039±0.0006)

Piston/cylinder wall clearance

Wear Limit mm (in) 0.2 (.0079)

New mm (in) 0.39 (.0154)

Connecting rod big end axial play

Wear Limit mm (in) 1.2 (.0472)

Maximum crankshaft end-play [2] mm (in) 0.3 (.0118)

Maximum crankshaft deflection at PTO mm (in) 0.06 (.0024)

Reed Valve P/N 420 924 810

FUEL SYSTEM

Carburetor type PTO/MAG TMX 34-29/(Europe) TMX 34-33

Main jet PTO/MAG 400/(Europe) 350

Needle jet Q-6

Pilot jet 25

Needle identification — clip position 6EN29-61 — 3

Slide cut-away 4.0

Float adjustment ± 1 mm (± .040 in) —

Air screw adjustment ± 1/16 Turn 1.0

Idle speed RPM ± 200 RPM 1600

Gas/oil ratio mixing oil Premix 33: 1 / XP-S Synthetic oil

Vehicle with valid warranty (standard compression insert)

Inside North America (R + M)/2 91 or higher

Gas grade/pump octane number

Outsine North America RON 95

Vehicle without warranty

Gas grade/pump octane number (R + M)/2 108 or higher

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-3

MODEL MX Z X 440 Racing

ELECTRICAL

Magneto generator output W290

Ignition type CDI

Spark plug make and type [6] NGK BR9ECS

Spark plug gap ± 0.05 mm (± 0.002 in) 0.45 (.018)

Ignition timing BTDC [3] mm (in) 3.00 (.1181)

Trigger coil [4] 190 – 300

Generating coil [4] 17.5 – 42.5

Lighting coil [4] 0.1 – 0.4

Primary 0.3 – 0.7

High tension coil [4]

Secondary k 8-16

Headlight W H4 60/55

Taillight and stoplight W8/27

Tachometer bulb W2x3

DRIVE

Gear ratio Teeth 21/45

Pitch mm (in) 9.525 (.375)

Chain

Type/Links Qty/Plates Qty Silent 74 - 15

Type of drive pulley TRA 3 Light

Ramp identification 435 [10]

Spring color White/White

Spring length ± 1.5 mm (± 0.060 in) 137.44 (5.41)

Engagement speed ± 200 RPM 5400

Drive pulley calibration screw position or calibration disc quantity [10] 5

Pulley distance Z16.5 (0.650)

X ±0.5mm(±.020in) 40.0 (1.575)

Offset

Y ± 0.75 mm (± .030 in) Dimension Y must exceed X of 0.86 mm (0.034 in)

± 0.7 kg (± 1.5 lbf) 0.0

Driven pulley spring preload cam angle

Degree 44°/48°

Drive belt part number P/N 417 300 288

Drive belt width (new) [12] mm (in) 37.7 (1.484)

Deflection ± 5 mm (± 13/64 in) 32 (1-1/4)

Drive belt adjustment

Force [8] kg (lbf) 11.3 (25)

Track width cm (in) 38.1 (15.0)

Track length cm (in) 307 (121)

Deflection mm (in) 30 to 35 (1-3/16 to 1-3/8)

Track adjustment

Force [9] kg (lbf) 7.3 (16)

Track SC 4

Suspension type

Ski R.A.S. A-Arm

02-4 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MODEL MX Z X 440 Racing

GENERAL SPECIFICATIONS

Length mm (in) 2882 (113)

Width mm (in) 1217 (47.9)

Height mm (in) 1022 (40)

Ski stance mm (in) 1080 (42.5)

Mass (dry) kg (lb) 199 (438)

Ground contact area cm2(in2)6670 (1034)

Ground contact pressure kPa (PSI) 2.93 (0.425)

Frame material Aluminum

Bottom pan material Impact Copolymer

Cab material/side panels Surlyn/Polypropylene

LIQUID SPECIFICATIONS

Fuel tank L(U.S.gal) 21 (5.5)

Chaincase/gearbox mL (U.S. oz) 250 (8.5)

Cooling system L(U.S.oz) 3.7 (125.1)

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-5

MX Z 600 HO/800HO

MX Z

MODEL

600 HO 800 HO

ENGINE

Engine type 593 HO 793 HO

Number of cylinder 2

Bore Standard mm (in) 72 (2.835) 82 (3.228)

Stroke mm (in) 73 (2.874) 75.70 (2.980)

Displacement cm3(in3)594.40 (36.273) 799.50 (48.789)

Compression ratio 12.25 ± 0.5 12.00 ± 0.5

7850

Maximum power engine speed (1) ± 100 RPM 8000

Power TEK: 7950

1st Semi-trapezoidal

Piston ring type

2nd —

New mm (in) 0.40 to 0.55 (.016 to .022)

Ring end gap

Wear limit mm (in) 1.0 (.039)

New mm (in) 0.05 to 0.1 (.0020 to .0039)

Ring/piston groove clearance

Wear limit mm (in) 0.2 (.0079)

New mm (in) 0.105 ± 0.013 (.0041 ± .0005) 0.125 ± 0.022 (.0049 ± .0009)

Piston/cylinder wall clearance

Wear limit mm (in) 0.18 (.0071) 0.20 (.0079)

Maximum crankshaft end play (2) New mm (in) 0.3 (.012)

Maximum crankshaft deflection at PTO Wear limit mm (in) 0.06 (.0024)

New mm (in) 0.310 to 0.677 (.0122 to .0267)

Connecting rod big end axial play

Wear limit mm (in) 1.2 (.0472)

ELECTRICAL

Magneto generator output 360 W

Ignition type CDI

Make and type NGK BR9ECS (6)

Spark plug

Gap mm (in) 0.40 to 0.50 (.016 to .020)

Ignition timing BTDC (3) (12) mm (in) 2.79 (.110) 2.370 (.0933)

Trigger coil (4) 190 to 300

Low speed —

Generating coil (4)

High speed —

Lighting coil (4) 0.1 to 1.0

Primary —

High tension coil (4)

Secondary —

Battery 12 V, 18 A•h

Headlamp W60/55 (H4)

Taillight and stoplight W8/27

Tachometer and speedometer bulbs W2x3

Fuel and temperature gauge bulbs W —

02-6 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MX Z

MODEL

600 HO 800 HO

Starter solenoid A 30

Fuse

Fuel level sensor A —

FUEL SYSTEM

TM40–B319

Carburetor/throttle body type TM40 – B316

Power TEK: TM40–B322

400

Main jet 380

Power TEK: 440

Needle jet P-0M

Pilot jet 17.5 17.5

9DGI16–58

Needle identification 9DHI14–58

Power TEK: 9EGI04–58

1

Clip position 1

Power TEK: —

Slide cut-away 2.0

Float adjustment mm (in) —

Air or pilot screw adjustment ±1/16turn 1.5

Idle speed ± 200 RPM 1600 1500

Gas type Unleaded

Inside North America (R+M)/2 87 or higher

Pump octane number

Outside North America RON 91 or higher

Gas/oil ratio Injection

Injection oil XP-S mineral injection oil

COOLING SYSTEM

Type Liquid

Ethyl glycol/water mix (50% coolant, 50% distilled water).

Mixture

Use coolant specifically designed for aluminum engines.Coolant

Premix P/N 219 700 362 — 12 x 1 L

Deflection mm (in) N.A.

Axial fan belt adjustment

Force kg (lbf) N.A.

Thermostat opening temperature °C (°F) 42 (108)

Radiator cap opening pressure kPa (PSI) 90 (13)

DRIVE

Chaincase oil XP-S Synthetic chaincase oil

Adrenaline 22/43 25/45

Renegade 21/43 23/43Chain drive ratio

Trail 22/43 —

Pitch in 3/8

Silent 76/13

Chain

Type/links qty/plate qty Silent 74/13

Renegade: Silent 74/13

Drive pulley type TRA III

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-7

MX Z

MODEL

600 HO 800 HO

Clutch engagement ± 100 RPM 3800

Spring color Purple/Blue Violet/Green

Spring length mm (in) 114.6 (4.5) 133.5 (5.256)

Weight —

Block —

Cap —

Pin Solid (P/N 417 004 308) Solid (P/N 417 222 594)

414

Ramp 410

Power TEK: 415

Drive pulley calibration

Screw position 3

Type HPV VSA

Spring preload 0

Adrenaline 47/44° 50/40°

Renegade 44° 47/40°

Driven pulley type

Cam angle

Trail 47/44° —

Pulley distance Zmm(in)20.0 (.787)

Xmm(in)37.0 ± 0.5 (1.457 ± 0.2)

Offset

Y–X mm(in) 0.82 (.0032)

Drive belt part number P/N 417 300 197 417 300 166

Width mm (in) 37.3 (1.327) 37.7 (1.484)

Drive belt

Wear limit mm (in) 34.9 (1.374) 35.3 (1.390)

Deflection mm (in) 32 ± 5 (1.260 ± .197)

Drive belt adjustment

Force (8) kg (lbf) 11.30 (24.91)

Adrenaline 381 mm (15 in)

Renegade 406 mm (16 in)Width

Trail 381 mm (15 in) —

Adrenaline 3074 mm (121 in)

Renegade 3456 mm (136 in)Length

Trail 3074 mm (121 in) —

25.4 mm (1.0 in)

Adrenaline

31.8 mm (1.25 in)

Renegade

—44.5 mm (1.75 in)

Trail 25.4 mm (1.0 in) —

Track

Profile height

Trail Europe 31.8 mm (1.25 in) —

Adjustment Deflection mm (in) 30 to 35 (1.181 to 1.378)

Track adjustment

Force (9) kg (lbf) 7.3 (16)

02-8 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MX Z

MODEL

600 HO 800 HO

Adrenaline SC 3 121”

Renegade SC 3 136”Track

Trail SC 3 121” —

Suspension type

Ski R.A.S. A-arm

BRAKE

Brake fluid reservoir mL (U.S. oz) 60 (2.0)

GTLMA (DOT 4) (P/N 293 600 062)

Brake fluid (P/N)

Racing brake fluid SRF (DOT 4) (P/N 293 600 063)

VEHICLE INFORMATIONS

Manual start 211 kg (464 lb)

Adrenaline

Electric start 223 kg (491 lb)

Manual start 218 kg (480 lb)

Renegade

Electric start 230 kg (506 lb)

Manual start 211 kg (464 lb) —

Mass (dry)

Trail

Electric start 223 kg (491 lb) —

Adrenaline mm (in) 2882 (113.464)

Renegade mm (in) 3055 (120.276)Length

Trail mm (in) 2882 (113.464) —

Width mm (in) 1217 (48)

1105 (43.5)

Height mm (in) 1105 (43.5)

Renegade X: 1022 (40.2)

Skistance(carbidetocarbide) mm (in) 1195 (47)

Toe-out mm (in) 0.00

Camber 0°

Adrenaline cm2(in2)6910.2 (1071)

7926 (1229)

Renegade cm2(in2)7931.3 (1229)

X: 7931.3 (1229)

Ground contact area

Trail cm2(in2)6910.2 (1071) —

Adrenaline kPa (PSI) 3.17 (.460) 3.00 (.435)

Manual start 2.70 kPa (.392 PSI)

Renegade

Electric start 2.84 kPa (.412 PSI)

Ground contact pressure

Trail kPa (PSI) 3.00 (.435) —

Frame material Aluminum

Bottom pan material Impact resistant copolymer

Hood material Surlyn

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-9

MX Z

MODEL

600 HO 800 HO

CAPACITIES

Fuel tank L (U.S. gal) 40 (10.6)

Chaincase/gearbox mL (U.S. oz) 250 (8.5)

Adrenaline L (U.S. oz) 4.9 (165.7)

Renegade L (U.S. oz) 5.17 (174.8)Cooling system

Trail L (U.S. oz) 4.9 (165.7) —

Injection oil reservoir L(U.S.oz) 3.5 (118)

TIGHTENING TORQUE (engine cold)

Drive pulley retaining screw (5)

Exhaust manifold nuts or bolts 22 N•m (16 lbf•ft)

Magneto ring nut 125 N•m (92 lbf•ft)

M6 9N•m(80lbf•in)

Crankcase nuts or screws

M8 29 N•m (21 lbf•ft)

Crankcase/engine support nuts or screws 35 N•m (26 lbf•ft)

Cylinder head screws 29 N•m (21 lbf•ft)

Crankcase/cylinder nuts or screws 40 N•m (30 lbf•ft)

Axial fan shaft nut —

02-10 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MX Z 380F/550F

MX Z

MODEL

380 F 550 F

ENGINE

Engine type 377 552

Number of cylinder 2

Bore Standard mm (in) 62 (2.441) 76 (2.992)

Stroke mm (in) 61.00 (2.402)

Displacement cm3(in3)368.30 (22.475 in) 553.40 (33.771)

Compression ratio 11.2 ± 0.5 9.6 ± 0.5

Maximum power engine speed (1) ± 100 RPM 7000 7000

1st Semi-trapezoidal

Piston ring type

2nd Rectangular

New mm (in) 0.02 to 0.35 (.008 to .0138) 0.40 to 0.55 (.016 to .022)

Ring end gap

Wear limit mm (in) 1.0 (.039)

New mm (in) 0.040 to 0.110 (.0016 to .0043) 0.04 to 0.08 (.0016 to .0030)

Ring/piston groove clearance

Wear limit mm (in) 0.2 (.0079)

New mm (in) 0.070 ± 0.016 (.0028 ± .0006) 0.147 ± 0.026 (.0058 ± .0010)

Piston/cylinder wall clearance

Wear limit mm (in) 0.2 (.0079)

Maximum crankshaft end play (2) New mm (in) 0.3 (.012)

Maximum crankshaft deflection at PTO Wear limit mm (in) 0.06 (.0024)

New mm (in) 0.200 to 0.527 (.0079 to .0207)

Connecting rod big end axial paly

Wear limit mm (in) 1.2 (.0472)

ELECTRICAL

Magneto generator output 340 W

Ignition type CDI

Make and type NGK BR9ES

Spark plug

Gap mm (in) 0.40 to 0.50 (.016 to .020)

Ignition timing BTDC (3) mm (in) 2.79 (.110) 2.77 (.109)

Trigger coil (4) 160 to 180

Low speed 6.3

Generating coil (4)

High speed 7.7

Lighting coil (4) 0.145 to 0.175

Primary N.A.

High tension coil (4)

Secondary N.A.

Battery N.A.

Headlamp W60/55 (H4)

Taillight and stoplight W8/27

Tachometer and speedometer bulbs W2x3

Fuel and temperature gauge bulbs WN.A.

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-11

MX Z

MODEL

380 F 550 F

Starter solenoid A N.A.

Fuse

Fuel level sensor A N.A.

FUEL SYSTEM

Carburetor type VM30–213 VM34–617

Main jet 195 260

Needle jet Q-2 P-7

Pilot jet 35 45

Needle identification 6DEY13-3 6BCY40-4

Slide cut-away 2.0 2.5

Float adjustment mm (in) 23.90 ± 1 (.941 ± .040)

Air or pilot screw adjustment ±1/16turn N.A.

Idle speed ± 200 RPM 1650

Gas type Unleaded

Inside North America (R+M)/2 87 or higher

Pump octane number

Outside North America RON 91 or higher

Gas/oil ratio Injection

Injection oil XP-S mineral injection oil

COOLING SYSTEM

Type Fan

Deflection mm (in) 9.5 ± 0.5 (.374 ± .020)

Axial fan belt adjustment

Force kg (lbf) 5.0 (11.0)

Thermostat opening temperature N.A.

Radiator cap opening pressure N.A.

DRIVE SYSTEM

Chaincase Oil XP-S synthetic chaincase oil

Chain drive ratio 19/45 19/43

Pitch in 3/8

Chain

Type/links qty/plate qty Silent 74/13 Silent 72/13

Drive pulley Type Bombardier Lite

Clutch engagement ± 100 RPM 3300 3500

Spring color Blue/Pink Purple/Yellow

Spring length —

417 120 400 = 21 g 1 x 417 120 400 + 1 x 417 120 400 +

Weight

417 114 400 = 3.4 g 1 x 417 114 400 2 x 417 114 400

Block 3 x 417 128 605 3 x 417 128 932

Cap 1 x 417 114 500

Pin —

Ramp —

Drive Pulley Calibration

Screw position —

02-12 MMC2005-001_02A.FM

SECTION 02 - 2005 MODELS TECHNICAL DATA

MX Z

MODEL

380 F 550 F

Type Formula RER

Spring preload N.A.Driven pulley

Cam angle 44°

Pulley distance Zmm(in)17.5 (0.689)

Xmm(in)33.4 ± 0.5 (1.315 ± 0.2)

Offset

Y–X mm (in) 0.46 (.0.181)

Drive belt part number P/N 415 060 600

Width mm (in) 34.70 (1.366)

Drive belt

Wear limit mm (in) 32.30 (1.272)

Deflection mm (in) 32 ± 5 (1.260 ± .197)

Drive belt adjustment

Force (8) kg (lbf) 11.34 (25)

Width mm (in) 381 (15)

Length mm (in) 3074 (121)

18.4 (.724) 22.3 (.878)

Track

Profile height mm (in)

Europe: 25.4 (1.0) Europe: 31.8 (1.25).

Deflection mm (in) 30 to 35 (1-3/16 to 1-3/8)

Track Adjustment

Force (9) kg (lbf) 7.3 (16)

Track SC 3 121”

Suspension type

Ski R.A.S. A-Arm

BRAKE

Brake fluid reservoir mL (U.S. oz) 60 (2.0)

GTLMA (DOT 4) (P/N 293 600 062)

Brake fluid (P/N)

Racing brake fluid SRF (DOT 4) (P/N 293 600 063)

VEHICLE INFORMATIONS

Mass (dry) kg (lb) 186 (409) 195 (429)

Length mm (in) 2830 (111)

Width mm (in) 1150 (45)

Height mm (in) 1105 (43.5)

Skistance(carbidetocarbide) mm (in) 1080 (42.5)

Toe-out mm (in) 0.00

Camber 0°

Ground contact area cm2(in2)6947 (1077)

Ground contact pressure kPa (PSI) 2.63 (.381) 2.75 (.399)

Frame material Aluminum

Bottom pan material Impact Copolymer

Hood material Surlyn

Side Panels Polypropylene

SECTION 02 - 2005 MODELS TECHNICAL DATA

MMC2005-001_02A.FM 02-13

MX Z

MODEL

380 F 550 F

CAPACITIES

Fuel tank L (U.S. gal) 40 (10.6)

Chaincase/gearbox mL (U.S. oz) 250 (8.5)

Cooling system L(U.S.oz) N.A.

Injection oil reservoir L(U.S.oz) 3.5 (118.4)

TIGHTENING TORQUE (engine cold)

Drive pulley retaining screw (5)

Exhaust manifold nuts or bolts 22 N•m (16 lbf•ft)

Magneto ring nut 105 N•m (77 lbf•ft)

M6 N.A.

Crankcase nuts or screws

M8 22 N•m (16 lbf•ft)

Crankcase/engine support nuts or screws 40 N•m (30 lbf•ft)

Cylinder head screws 22 N•m (16 lbf•ft)

Crankcase/cylinder nuts or screws N.A.

Axial fan shaft nut 48 N•m (35 lbf•ft)

Page is loading ...

BRP ski-doo MX Z 800 HO User manual

This manual is also suitable for

BRP ski-doo MX Z 800 HO User manual

Related papers

Other documents