2. UNDISCLOSED
  3. RED1RC
RED1RC

UNDISCLOSED RED1RC Operating instructions

  • Hello! I've reviewed the user manual for the RED1RC Shock Stand. This guide provides clear instructions on storing shocks with and without springs, utilizing a slide top plate and slider insert. I'm ready to help with any questions you have about using this device.
  • How do I store shocks with springs?
    How do I store shocks without springs?
    What is the purpose of the slider insert?
SHOCKS WITH SPRINGS
1
2
1. SLIDE TOP PLATE (DIRECTION SHOWN)
2. SLIDER INSERT TO BE STOWED (AS SHOWN)
RED1RC
1/5 SCALE SHOCK STAND
SHOCKS WITHOUT SPRINGS
1
2
1. SLIDE TOP PLATE (DIRECTION SHOWN)
2. REMOVE SLIDER INSERT (SLIDE UP AND PULL)
3a. INSERT SLIDER INTO THE FRONT OPENING
3b. ARROW GOING IN FIRST
3a
4. SLIDE TOP PLATE (DIRECTION SHOWN)
TO LOCK/HOLD THE SHOCKS FOR STORING
4
3b
3. INSERT SHOCKS
INSERT SHOCKS
/