1 Configuration software
This Quick Start Guide provides information on where to download the
correct software and drivers needed in order to configure the device.
For more in-depth information, visit Emerson.com/Rosemount to download
the Rosemount 5408 and 5408:SIS with HART
®
Reference Manual or the
Rosemount 5408 with FOUNDATION
™
Fieldbus Reference Manual.
1.1 FDI compliant hosts
Rosemount Radar Master Plus is the recommended tool for configuration.
The Instrument Inspector
™
Application or any FDI compliant host is needed
to run Rosemount Radar Master Plus.
Instrument Inspector is available at Emerson.com/InstrumentInspector. The
installation typically includes the Rosemount 5408 FDI Package.
Note
If the Can’t initialize Radar Master error message occurs, then
the software revision on your device requires an update of the Rosemount
Radar Master Plus FDI Package.
1.1.1 Download the latest FDI Package
To manually add/update the Rosemount Radar Master Plus FDI Package:
Procedure
1.
Download the latest FDI Package at
Emerson.com/RosemountRadarMasterPlus
.
2. Unzip/extract the FDI Package.
3. Add the FDI Package to the host system.
1.1.2 Add the FDI Package to Instrument Inspector
Procedure
1. Start
Instrument Inspector.
2. From the menu bar, select
, and then select Add Device Package.
3. Browse to the downloaded FDI Package and select Open.
Quick Start Guide November 2019
2 Rosemount 5408 and 5408:SIS Level Transmitters