ad notam DSTB-IPTV User manual
- Category
- Smart TV boxes
- Type
- User manual
DSTB-IPTV USER MANUAL
EN
subject to modification, errors and omissions excepted * 09-2013 * V1
2
DSTB-IPTV
PRODUCT INFORMATION - SCOPE OF DELIVERY
ad notam introduces the DSTB-IPTV, a slim smart TV box that turns any ad notam monitor system to a multifunctional
smart TV, a movie player, a music player and/or a picture viewer. Besides, you may browse the internet, answer E-Mails and
join your friends on social media platforms. It is ready to interact with all models of the ad notam Display Frame Unit (DFU)
line and any monitor system that features an HDMI input port. Before using the device please check the following
contents of the box for completeness:
• Digital set top box incl. glass mounting system....................
• IR smart remote control...........................................................................................................
• 12V DC power adapter incl. power cord and glass mounting system.....................................
• IR emitter LED.....................................................................................................
• HDMI cable.................................................................................
RELEVANT OPTIONAL ACCESSORIES
• Y-cable 12V DC, Art.No. ET_551
• USB extension cable, Art.No. ET_561
3
PRODUCT INFORMATION - INPUT / OUTPUT OVERVIEW
1. Status LEDs
2. IR receiver eye window
3. Power button
4. Power input, 1 x power adapter connector (12V DC / 1.5A)
5. CVBS video output, 1 x RCA terminal, yellow
6. Line audio output, 2 x RCA terminal, white (L), red (R)
7. Reset button
8. HDMI output, 1 x HDMI terminal
9. LAN input, 1 x RJ45 terminal, RJ45 wire internet connector
10. Wi-Fi, built in antenna
11. USB input, 3 x external USB host, 1 x internal USB
12. SD input, 1 x SD card slot
168mm / 6.61“
21mm / 0.83“
1
23
4
5 6 7 8910
FRONTVIEW
BACKVIEW
132mm / 5.20“
11 12
SIDEVIEW
4
DSTB-IPTV
GETTING STARTED - HOW TO CONNECT
ad notam DFU monitor system
Connect an HDMI cable to the HDMI output terminal of the digital set top box and one of the three HDMI inputs of
the DFU.
IR emitter LED
In order to use the integrated IR receiver of a combined DFU monitor system connect the IR emitter LED (ET_541) to
the IR output port of the DFU monitor system and glue it in front of the IR receiver eye window of the DSTB-IPTV.
Ethernet LAN
The DSTB-IPTV is equipped with an internal built-in 802.11 b/g/n Wi-Fi module. Use this port once you choose to
connect to your network via wire. Both options (Wi-Fi and Ethernet) may be (de-)activated independently within the
Settings menu or during the Installation Wizard at initial setup.
External USB media source
Connect an external USB media source to one of the USB sockets in order to install a software update or to run a
media content from the USB device. In order to have access to the USB ports also after installation, we recommend
installing USB extension cables.
USB mouse or keyboard
Connect a mouse or keyboard to one of the USB sockets to facilitate the handling of the DSTB-IPTV. In order to have
access to the USB ports also after installation, we recommend installing USB extension cables.
5
Pg
Pg
Pg
Pg
GETTING STARTED - REMOTE CONTROL
IR smart remote control
Pg
Pg
Cursor up
Pg
Pg
Cursor left
Pg
Pg
OK, confirm selection
Pg
Pg
Cursor right
Pg
Pg
Cursor down
Zoom out (application-dependent)
Pg
Pg
Zoom in (application-dependent)
Pg
Pg
Back
Pg
Pg
Menu (mouse right-click)
Pg
Pg
Home screen, launcher
Pg
Pg
Power (toggle power on / off)
Pg
Pg
Information, notification
Pg
Pg
Mute (sound on / off)
Pg
Pg
Pg
Pg
Increase volume
Pg
Pg
Scroll up (application-dependent)
Pg
Pg
Decrease volume
Pg
Pg
Scroll down (application-dependent)
functions used for ad notam DFU monitor systems
6
DSTB-IPTV
GETTING STARTED - REMOTE CONTROL
IR remote control WATERPROOF
Information, notification
Cursor up
Cursor down
Cursor left
Cursor right
OK, confirm selection
Menu (mouse right-click)
Home screen, launcher
Back
LED indicator
NOTE
Observe that the contact clip (+)
is connected correctly to the plus
pole of the battery. If the contact
clip is positioned under the
battery, the remote control will
not work.
7
GETTING STARTED - START UP
Connect the provided power adapter to the DSTB-IPTV
and plug the other end into an outlet. Upon power
connection the DSTB-IPTV will boot up.
The Boot Screen comes up with the Android robot, the
Loading Screen shows the Android logo.
Upon your first startup of the DSTB-IPTV the Installation
Wizard will be displayed automatically.
Navigation
Use the Cursor keys and Back key of your remote
control to navigate the user interface. Alternatively you
may connect a mouse and/or keyboard to facilitate
the handling of the DSTB-IPTV.
Execute the Next button to continue with the setup of
the DSTB-IPTV.
8
DSTB-IPTV
GETTING STARTED - INSTALLATION WIZARD
Language
The Installation Wizard will ask you to select your
preferred language. Once done execute the Next button
to continue.
Display Position
On demand you may adapt the image position and size.
Follow the instructions to zoom or change the Display
Position.
9
GETTING STARTED - INSTALLATION WIZARD
In order to be able to use all functions the DSTB-IPTV
box needs a connection to a network. This might be
accomplished with either a wired Ethernet or a wireless
Wi-Fi connection. If you want to integrate the DSTB-IPTV
into a wireless network only or if you don´t want to
setup a connection to a network at all, you may skip this
section by executing the Next button.
Ethernet Configuration
If you choose to connect via Ethernet, plug the network
cable to the RJ45 port of the DSTB-IPTV box and activate
Ethernet within the Ethernet Configuration. If you
are using basic DHCP settings for your router, the
DSTB-IPTV will automatically connect to your network.
You can also manually configurate your network setting.
Once the DSTB-IPTV box is connected to the network,
the icon in the bottom right corner of the screen will
show two green monitors.
10
DSTB-IPTV
GETTING STARTED - INSTALLATION WIZARD
In order to be able to use all functions, the DSTB-IPTV
needs a connection to a network. This might be
accomplished with either a wired Ethernet or a wireless
Wi-Fi connection. If you have already established a
connection via Ethernet in the last step of the Installation
Wizard or if you don´t want to setup a connection to a
network at all, you may skip this section by executing the
Next button.
Wi-Fi Configuration
The DSTB-IPTV has a built-in wireless feature. To activate
it, go to Wi-Fi and toggle the switch in the upper right
hand corner to ON. The system will begin to scan for
available networks and generate an according list.
Select the network of your choice and if required, enter
the according password. Then execute the Connect
button.
It is recommended to stay on this page until the status
changes from Authenticating to Connected. Once the
DSTB-IPTV is connected to the network, the icon in the
bottom right hand corner of the screen will show two
green monitors. The signal bar besides indicates the
strength of the Wi-Fi signal.
11
GETTING STARTED - LAUNCHER
The setup of the DSTB-IPTV is now almost complete.
Execute Finish to close the Installation Wizard.
Now you will be given the option of choosing the home
launcher. Please select the ad notam Metro icon.
Subsequently execute Always to set the ad notam
Metro launcher as your home screen. Once done the
ad notam home launcher will be displayed.
From the home screen, you have several options in the
form of six menu headers. Scroll left or right to display
the according content of the highlighted menu. The
menu headers are Home, Media Player, Online Media,
Game, All Apps and Settings.
12
DSTB-IPTV
LAUNCHER MENU
The Home menu features different quick launch icons
such as links to the App Store, Facebook or the internet
Browser. The App Store (Google Play) is your online
marketplace for app and media downloads. After
registration you can download apps, movies, music
etc. The Facebook icon is a shortcut to the Facebook
website. Use the Browser to surf the web. If you haven´t
connected a USB mouse and/or keyboard the remote
control is your input device also for the Browser. To
navigate on the pages use the cursor keys on the remote
control. Press OK to click a link or to input into a field.
A soft keyboard will be displayed on the screen that
enables you to enter letters and numbers. The Home
menu additionally features a File Manager and a Media
Center.
Media Player
The Media Player menu is a customizable page and
features a Movie Player, a Music Player and a Picture
Viewer in order to play videos or songs and to display
fotos. Add any media player app from the All Apps menu.
Online Media
The Online Media menu is a customizable page for
favorite online services and/or apps. Add any online
media app of your choice from the All Apps menu.
13
Game
The Game menu is a customizable page for game apps.
Add any game app of your choice from the All Apps
menu.
All Apps
The All Apps menu gives an overview of all installed
apps and services on the DSTB-IPTV.
You might add a shortcut of any app from the All Apps
list to a matching menu category. In order to do so,
navigate to the app in question, then press and hold the
OK button until a pop-up window appears. Select the
desired menu category and confirm with OK.
To remove a shortcut from a menu category navigate to
the app in question within the according menu category,
then press and hold the OK button until a pop-up window
appears. Select Yes to remove the shortcut from the
menu category.
14
DSTB-IPTV
Settings
Within the Settings menu, you can set preferences and
enable or disable functions. The most relevant settings
have already been treated during the Installation
Wizard. The Settings menu features different quick
launch icons such as links to the Network, the Display
Position or the Wallpaper settings. In addition you
might adapt the Input Methods, the Output Mode and
Uninstall Apps.
15
TECHNICAL SPECIFICATION - DSTB SYSTEM
System DSTB-IPTV
CPU
DUAL CORE ARM CORTEX A9
Frequency 1.5G
RAM DDR3 1G
OS
Android 4.1
Storage NAND flash 2G-32G
TECHNICAL SPECIFICATION - DSTB GENERAL FEATURES
General Features DSTB-IPTV
Power Voltage
DC 12V
Power Consumption 18W / 1.5A Standby < 1W
Media Player Local video playback incl. MPEG 1/2/4, H.264, VC-1, WMV, AVI, MKV, MOV etc.
Video Output Ratio 16:9
Video Resolution 1920 x 1080p
Music Player Local music player incl. MP3, WAV, WMA etc.
Picture Viewer BMP, JPG, TIF, PNG, GIF
HDMI HDMI 1.4a
Browser Google Chrome
Weight 420g
TECHNICAL SPECIFICATION - DSTB POWER ADAPTER
Art.No. Power
Voltage Input Voltage Output Operating Temperature Humidity Weight
ET_550 25W / 2.08A 100~240V AC 12V DC 0° - 40°C / 32° - 104°F 20 - 90% 140g
www.ad-notam.com
HDMI, the HDMI logo and high-definition multimedia
interface are trademarks of HDMI Licensing LLC.
ad notam®, MIRROR IMAGE® and MAGIC MIRROR®
are licensed trademarks of ad notam.
This product, parts, components and the assembly
are protected by or might be part of one or more of
the following intellectual property rights:
US 7455412 B2 - US 7589893 B2
EP 1168285 B2 - EP 1429308 B2 - EP 1809828 B1
E-Mail:
Web:
ad notam®
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
ad notam DSTB-IPTV User manual
- Category
- Smart TV boxes
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI