www.navico.com/commercial
Professional Instrument Series
I3005 and I3007
The Simrad® I3005 and I3007 Instrument Series oers
a 5- or 7-inch superior colour display with easy touch
control, a variety of graphic layouts with the capability
to enable up to eight dierent functions simultaneously.
Oering a flexible installation that supports a wide
variety of I/O signal types, both display sizes are
approved for SOLAS vessels.
The IS300 Series has the capability to enable the following
simultaneously:
Heading Repeater
IMO approved when paired with NMEA 2000, NMEA 0183,
or LWE heading sensor, such as Simrad GPS and Gyro
compasses.
Rudder Indicator
IMO approved when connected in an Autopilot System that
has the optional display of rudder demand. Reading rudder
positions from all Simrad rudder feedbacks or is compatible
with NMEA 0183 feedbacks from other third-party systems.
Rate of Turn Indicator
7” IMO approved and 5” non-IMO ROT Indicator with a
configurable scale range and is compatible with Simrad GPS
Compasses, HS60/70/80, Simrad Gyros GS80/85, and Simrad
Magenetic Compasses Precision-9, RC-42
Propeller Pitch Indicator
Configurable for use with Propulsion and Thruster (Note:
Transducer/Sensor not oered by Navico)
Propeller Shaft RPM
IMO compliant with a selectable Scale Range (Note:
Transducer/Sensor not oered by Navico)
Engine RPM Indicator
With a Selectable Scale Range from 200 up to 10,000 (Note:
Transducer/Sensor not oered by Navico)
Wind Instrument
Measuring True Wind Speed and Angle, Apparent Wind Speed
and Angle, Beaufort Wind Speed Indicator with Selectable
Orientations (relative to North or the Ships’ Bow). Compatible
with Simrad and B&G Sensors or any NMEA 2000 or NMEA
0183 Wind Sensors.
Digital Data
Data layout for display or a multitude of data types; Vessel,
Environmental, Navigation, Engine, Depth, Speed, Heave, Pitch,
Roll, Time & Date.
Note: Digital data types can only be selected from the available
installed transducers and sensors.