Document number: 86074-1
Use with: 81183-1
Date: 1 August 2002
ST290 Graphic Display - quick reference guide ST290 Graphic Display - quick reference guide
Operation
Chapter Select mode
Select
chapter
Select
chapter
Increase parameter value, or
select popup menu value
Decrease parameter value, or
select popup menu value
Edit mode
Select pages in current chapter
Select pages in current chapter
Setting an alarm: Press to set alarm
threshold, or switch alarm off.
Selecting a menu item:
Press when menu item is highlighted.
Normal operation button actions
Increase brightness
Decrease brightness
Lamp Adjust mode
Contrast Adjust mode
Press
Hold down for 1 second
Press
Hold down for 1 second
Press
Hold down
for 1 second
Press
Hold down
1 second
Increase contrast
Decrease contrast
1 secondHold down
Controlling a timer: Press to switch timer
on/off or start/stop timer.
Press
Press
or
or
User setup
If CUSTOM 1 or 2 is selected,
refer to the procedures in
text to set up your system
profile.
Note: Although you can use
only one profile at a time,
you can set up both custom
profiles at this point.
Select either FULL, SAIL,
POWER, CUSTOM 1 or
CUSTOM 2
PROFILE
2 sec
DATA UNITS
Set speed units
Set distance units
Set depth units
Set wind speed units
Set temperature units
Set volume units
Set flow-rate units
EXIT SETUP
TRANSDUCER CAL.
Transducer calibration only
needs to be carried out from
one instrument.
Refer to the chapter text for
structure and procedures.
Normal
operation
2 sec
User Setup
Select Magnetic or True
Select chapter/page
selection method
Set race timer guns 1, 2,
& 3 on or off
Set speed data resolution
Set depth data resolution
Set wind speed data
resolution
DISPLAY OPTIONS
Set distance data resolution
Set date format
Set time format
Set month format
Set remote group
Set position logging interval
Set linked keypad(s)
Set sequence number
Set time offset (from UTC)
Set distance trip counters 1,
2, 3, 4 & 5 on or off
Set button beep on/off
Set pilot popup on/off
Set pilot calibration on/off
Select page to be viewed
when chapter first selected
DISPLAY RESPONSE
Speed
Depth
Heading
Wind angle
Wind speed
XTE
Display update rate
SETUP ACCESS
USER SETUP ENTRY
FAVORITES
Set number of Favorite
pages (1 to 5)
Set rollover
Pilot setup
chapters
See handbook
for details.
Available only
if PILOT CAL is
on.
To select the chapter you want
Press 1 sec hold down
PILOT BASIC CAL
PILOT SEATRIAL CAL
PILOT ADVANCED CAL
LAMPS
Set level 2 (%)
Set level 1 (%)
Set level 3 (%)
Set lamps
Allocate instrument to group