3
Software Download and Installation
Software Download and Installation
Your B360 will power up and show the NovoConnect
home screen (as shown in the gure on this page)
once it is properly connected. Follow the steps below
to download the NovoConnect presentation software
from your B360 onto your PC.
Setup Wi-Fi:
Enable Wi-Fi on your computer. Search for
and connect to the SSID shown on the bottom
right corner of the NovoConnect home screen
(e.g. NVC_DC9AB). Wait a few seconds for the
connection to be established.
A
B
A
B
Software Download:
For Windows/Mac: To download the
presentation software, enter the URL shown
on the NovoConnect home screen into your
browser and follow the instructions on the
next page to download and install.