CE Labs HM6EK-3 User manual

Category
Video switches
Type
User manual
LAUNAM NOITCURTSNI
HDMI Extender Kit
1.3 over Cat5
HM6EK-3
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
Document: HM6EK-3_manual.pdf
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Package Contents:
• HDMI Extender Local Unit
• HDMI Extender Remote Unit
• 1 user manual
• 2 power adapter DC 5V 1A
HEX3T
(Transmitter)
HEX3R
(Receiver)
930_3019_02_Rev.A
A
FEATURES
HDMI 1.3 compliant
Extends the Transmission distance up to 200 ft. (60m). from the source under
formats 480i, 480p, 576i, 576p,720p,1080i, over CAT5e,
Extends the Transmission distance up to 100ft (30m). from the source under
format 1080p(8bit), over CAT5e,
Extends the Transmission distance up to 65ft (20m). from the source under
format 1080p(12bit), over CAT6e,
Minimizes the cable skew by selection of 3 switches level digital
equalization control
Allows cascading
Perfectly integrated with other HDMI over CAT 5 (2 cables)series products.
Support 480p/720p/1080i/1080p.
HDTV resolution up to 1080p(8Bit) / 30 meter. (Cat.5)
HDTV resolution up to 1080p(12Bit) / 20 meter.(Cat.6e)
Support DDC & HDCP.
Use two CAT.5 cables.
Easy installation
NOTICE
The length depends on the characteristics and quality of the cable. Higher
resolutions and longer transmission distances require low skew cables
(< 25ns/100m) for best performance.
Unshelded CAT6 with metal RJ-45 connectors is recommended.
For resolution greater than 1080i or 1280x1024, a CAT6 cables is recommended.
For long extension users, solid LAN cables are your only choice.
EIA/TIA -568-B termination (T568B) for LAN cables is recommended for
better performance.
If your HDMI display has multiple HDMI inputs, it is found that the first
HDMI input (HDMI#1) generally can produce better transmission
performance among all HDMI inputs.
DIP Switch Transmitter Settings
Transmitter SW De-Emphasis De-Emphasis
Pin1,Pin2 Level in mVpp Level in dB
-----------------------------------------------------------------------------
On, On 1200 0
On, Off 850 -3
Off, On 600 -6
Off, Off 426 -9
-----------------------------------------------------------------------------
Pin3: Equalization
On: Enables
Off: Disables
DIP Switch Receiver Settings
Receiver SW EQ (dB)
Pin1,Pin2,Pin3
----------------------------------------------------
On, On, On 9
On, On, Off 14
On, Off, On 18
On, Off, Off 21
Off, On, On 24
Off, On, Off 26
Off, Off, On 28
Off, Off, Off 30
----------------------------------------------------
Typical application:
SPECIFICATIONS
TRANSMITTER RECEIVER
HDMI: 1.3 compliant
Support: DDC & HDCP
Video support: 480i, 480p, 576i, 576p,720p,1080i,1080p
Transmission distance:
Up to 200ft from the source Under formats 480i, 480p, 576i, 576p,720p,
1080i, over CAT.5e
Up to 100ft. (30m) Under format 1080p (8Bit), over CAT.5e
Up to 65ft (20m) Under format 1080p(12bit), over CAT6e
Max. resolution 1080p (12 Bit)
Max. cable distance 200 ft (60m) 1080i
Equalizer 4-level digital control 8-level digital control
Equalizer controlled by 3 DIPswitches 5 DIP switches
Input TMDS signal 1.2 Volts (peak to Peak)
Input DDC signal 5 Volts (peak to peak TTL)
HDMI connector Type A (19 pin female) Type A (19 pin female)
LAN connector 2x RJ-45 8P8C 2x RJ-45 8P8C
Power Supply 5V 1A DC 5V 1A DC
Operation temperature 32~104 ºF (0~40ºC)
Storage temperature -4~140 ºF (-20~60ºC)
Relative humidity 20~90% RH (no condensation)
Housing Metal
Unit Dimensions (LxWxH) 2.75” x 2.36” x 1” (LxWxH) 2.75” x 2.36” x 1”
(LxWxH) 70 x 60 x 25mm (LxWxH) 70 x 60 x 25mm
Unit Weight 4.98 oz. (141g) 4.94 oz. (140g)
  • Page 1 1
  • Page 2 2

CE Labs HM6EK-3 User manual

Category
Video switches
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI