2. MODWAY
  3. EEI-6530-SBR

MODWAY EEI-6530-SBR Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the modway EEI-6530 lamp. This document details the steps for assembling the lamp, including use of included Allen key to attach lampshade, screwing metal tube to the base and light bulb installation guidance. I'm ready to answer your questions about setting up this lamp.
  • What tools are needed for assembly?
    What type of light bulb is required?
    Where should I assemble the lamp?
EEI-6530
V1.07.17.23
Wait!
PAGE 2 0F 4
x12mm Allen Key
x1Inner Hexagon Screw
A
B
Assemble your item on a flat, carpeted
area, with plenty of space to work. This will
prevent damage and scratches to your
floors or the item while you're assembling
the product.
+ One (1) E26 (medium-base) Light Bulb (MAX. 40W)
x2Short Screw
C
+1 Spare Included
PAGE 3 0F 4
ATTENTION: To avoid the risk of fire, do not exceed the
recommended wattage indicated on the wattage label.
Step 1.1 Pulling out the power cable.
Step 1.2 Use the 2mm Allen Key (B) to
unscrew the Inner Hexagon Screw (A),
then attach the lamp shade onto round
part of metal tube and tighten the Inner
Hexagon Screw (A).
A
B
Step 2
Inner Hexagon Screw
Ax1
2mm Allen Key
Bx1
Step 2.1 Use screwdriver to unscrew the
Short Screws (C),insert the metal tube to
the base and tighten Short Screws(C).
Step 2.2 Install light bulb according to the
wattage label (E26,G50 MAX. 40W, bulbs
not included).
Step 1.1
Step 1.2
C
Short Screw
Cx2
Step 2.1
Step 2.2
PAGE 4 0F 4
Your lamp is complete and ready to enjoy.
Indoor use only.
/