2. RC4WD
  3. Anti Wrap Bar

RC4WD Anti Wrap Bar User manual

  • Hello! I've reviewed the instructions for the Anti Wrap Bar for Yota 2 Axles. This document outlines the steps to install the anti-wrap bar, including removing the vehicle body and wheels, and installing the bar with the required screws and nuts. I'm ready to assist you with any questions you have about this installation process.
  • What size set screws are used for Step 1?
    What is to be removed before installing the anti-wrap bar?
    What size screws attach the anti-wrap bar and slider at the same time?
Step 2.
Step 1.
Remove the Body.
100-01191
Anti Wrap Bar for Yota 2 Axles
M3 x 8mm BHSTS(Black)
150-0195
150-0195
150-0195
M3 x 12mm BHCS
150-0065
M3 x 12mm Set Screw
150-0236
M3 x 12mm Set Screw
150-0236
M3 x 12mm Set Screw
150-0236
M3 x 14mm BHCS
150-0064
M3 Flanged Lock Nut (Black)
175-0010
Thread Lock
Thread Lock
Thread Lock
Step 4.
Step 3.
Remove the rear wheels.
Remove the left side leaf spring bolts and install Anti Wrap bar.
100-01192
Anti Wrap Bar for Yota 2 Axles
M4 Flanged Lock Nut (Black)
175-0011
M4 Flanged Lock Nut (Black)
175-0011
M3 x 12mm BHCS
150-0064
Step 6.
Step 5.
Use the supplied longer self tapping screws to attach the anti-wrap bar and slider at the same time.
Install the body.
100-01193
Anti Wrap Bar for Yota 2 Axles
M3 x 8mm BHSTS(Black)
150-0195
M4 Flanged Lock Nut (Black)
175-0011
M4 Flanged Lock Nut (Black)
175-0011
M3 x 18mm BHSTS (Black)
150-0259
150-0195
150-0195
/