6-Meal Automac Pet Feeder
Product Overview
1
Cover & Easy-to-Carry Handle
Release Knob
Storage Tray
Rotatable Lid
LCD Display Screen
Control Panel
On/Off Button
Enter Button
Up Arrow Button
Down Arrow Button
Start Button
Speaker
Battery Compartments B
Battery Compartments A
Tech Specs
How to install the baeries & fill up the foods
Baery 4 x 1.5V C size baeries (not included)
1. Unlock the lid with the release knob and li it off.
2. Unscrew the baery covers with a screw driver (not included), insert 4 new 1.5V C size
baeries (not included) and ghten the screws with a screw driver (not included). Pls ensure
that baeries are inserted with correct polarity.
- When baery power is low, the red LED light flashes slowly (once per second). Then the
baeries have to be replaced. Important: aer changing the baeries, you have to turn the
device on again and set the me anew. The meals you have programmed are saved in the
device.
2
Battery Compartments B
Battery Compartments A
not including
LED light
How to turn on the device
3. Add your dog’s favorite food into the storage tray.
4. Make sure that the covers snaps securely into place.
1. Open the cover of the control panel and switch the device on or off with the ON/OFF buon
(the round buon on the le).
2. When the device is switched on, the me will automacally flash at ‘12:00 A.M.’.
3. Every me a buon is pressed, the automac food dispenser confirms this with a beep. First
press the ENTER Buon to set the current me. The hour flashes.
4. Use the arrow buons to set the hour. During seng, the me changes automacally
between A.M. (morning to noon) and P.M. (aernoon to midnight).
5. Aer you press the ENTER Buon again, the minutes start flashing.
6. Use the arrow buons to set the minutes.
7. When the me is correct, end the seng process by pressing the ENTER Buon for 2
seconds, it will make squeak beep for 2 mes, then the seng is end.
3
Storage Tray
How to program meals
How to set the feeding mes
Keep ENTER pressed for 3 seconds. Now MEALS begin to flash, and you are in the meal seng
mode. Press ENTER again and BREAKFAST flashes.
Aer you have chosen the MEAL and selected YES, the hour flashes.
Please note: If NO is chosen, the soware will go back to MEALS. Use the arrow buons to choose the
meal that you want to program.
1. Use the arrow buons to set the hour for the meal.
2. Please note: during seng, the me changes automacally between A.M. and P.M.
3. Press ENTER again and the minutes start to flash.
4. Use the arrow buons to set the minutes for the meal.
5. Press ENTER when the minutes have been set. The menu then automacally connues to
set the meal size (BOX).
1. Use the arrow buons to choose the meal that you want to program. BREAKFAST, LUNCH
and DINNER will flash one aer another when the arrow buons are pressed.
2. Press the ENTER Buon when you have chosen the meal you want.
· Then YES will flash. Now press ENTER if you want to set the me for the meal.
· If you do not want to set the me for this meal, use the downward arrow to choose NO and
then press enter.
4
How to set the meal size
Important
Aer you have set the feeding me, the menu for seng the meal size flashes (on the right on
the display screen).
1. Set the meal size that is to be served with the arrow buons. For each meal, you can choose
1, 2 or 3 Boxes (food units). One food unit is one of the six cavies in the device (approx. 240 ml
or 1 US cup each). If you choose two or three food units for a meal, the cavies will open one
aer another with an interval of 10 minutes.
2. Press the ENTER Buon to end the seng of BREAKFAST and BREAKFAST flashes. (You may
connue to set LUNCH and DINNER)
3. Press the arrow buon to choose LUNCH and DINNER, repeat the programming as
described above for each meal. Aer you have programmed all meals, press ENTER unl
the devicebeeps twice. That means your sengs are confirmed.
1. The counter SERVED shows how many food units have been served. Once all 6 food units
have been served, the red LED light flashes slowly (2 mes every 5 seconds) and new food
has to be filled in. Aer filling the device, press START and the device will work according to
the programming. The counter goes back to zero.
2. Aer programming, make sure that the cover over the control panel is securely fastened so
that your pet cannot change the sengs by accident.
Extra opon manual feeding: Keep the down arrow pressed for 3 seconds. This releases one
food cavity immediately.
5
LED light
Warning
FAQS
1. Remove all packaging before you use the device, dispose of all packing material properly.
Some items may be packed in poly bags. Danger of suffocaon keep out of reach of children
and pets.
2. Read the instrucon carefully before operang the device. Wrong sengs may lead to your
pet not being fed properly or not being fed at all.
3. This feeder is for indoor use only.
4. Place the feeder in a dry place on even ground.
5. Do not place the feeder in a closet, in a narrow space or close to a wall, as the top secon of
the feeder will rotate to expose the food trays. Placing the feeder where there is too lile
space around it may make it difficult for your pet to access the food.
6. Do not allow children to play with the feeder as sengs may be changed or the feeder may
not work correctly.
7. Do not try to disassemble the feeder.
8. Remove all baeries if the baeries are exhausted or you do not use the feeder for a longer
me.
9. Do not use baeries of different types or brands.
6
Common quesons with
the feeder
The LED flashes 2 mes
every 5 second.
It means that all 6 food compartments are emped
of food. Please add food into the device and press
the START buon to stop the LED flashing aer re-filled.
The LED flashes one me
a second. It means that the voltage is low. Please replace the baeries.
Check if the device is stuck. Please press MANUAL buon.
Restart the device.
Check if the baeries run out of power.
Check if the me and feeding schedule seng are unfinished.
Please complete the seng.
The LED flashes 3 mes
a second.
Other issues
Answers
10. Do not mix old and new baeries or baeries of different brands. Do not mix alkaline,
standard, or rechargeable baeries. Only use baeries of same or equivalent type as
recommended. Do not use rechargeable baeries. Non-rechargeable baeries are not to
be recharged.
11. Insert baeries with the correct polarity and always follow the manufacturer’s
instrucons.
12. Dispose of used baeries responsibly.
13. This feeder only can be served 6 food units. Check the device regularly and pets should not
be le unaended for long periods of me.
14. Do not touch the baery box with conductor when baeries are in to avoid the short
circuit risk.
7
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Petmate Le Bistro User manual
-
Prupet PP305 User guide
-
CONTOUR NEXT EZ meter User guide
-
Animal Planet Pet Feeder User manual
-
SereneLife SLAPF18 Owner's manual
-
Petsafe PFD00-14574 User manual
-
Cat Mate C500 Operating instructions
-
-
ArfPets Automatic Pet Feeder User manual
-
Closer Pets C500 User manual
