Kmart 42556381 User manual

Large round mirror

Mounting Instructions

Please read all instructions before installing

Step 1. Carefully remove the mirror from the packaging and place face down on a soft

surface.

Step 2. Using a tape measure or large ruler, measure the distance between the centre

points of each of the hangers on the back of the mirror.

Step 3. Determine your desired mounting location then mark your two mounting

points apart from each other with the measurement you took in step 2.

Step 4. Using your appropriate wall fixings, insert two screws into the wall leaving

approx. 10 to 12mm protruding at the marked locations.

Step 5. Hang the mirror from one of the fixings in the wall then slowly rotate the

mirror up to the second fixing and hang, being careful not to scratch the wall.

Step 6. Gently clean your mirror then you are complete.

Step 2 Step 3 Step 4 Step 5

Notes:

 Make sure your wall fixings/screw heads will fit inside the hangers

 Be careful not to damage the back of the mirror when hanging it on fixings

 If you are not confident in hanging the mirror, please seek professional assistance

Please consult your local hardware store for

assistance in selecting the appropriate

hardware. These instructions are meant as

a guide only and may need to be altered to

suit your specific application.