Omron B Series GigE Vision Monochrome Color CMOS Board Camera BxS213xx Owner's manual

Omron
Brand
Omron
Model
B Series GigE Vision Monochrome Color CMOS Board Camera BxS213xx
Type
Owner's manual
GigE Vision
Monochrome / Color CMOS
Board Camera
Product Specifications and User’s Guide
STC-BBS213POE-BC (2.1M / Monochrome / RJ45 connector / PoE power / C mount)
STC-BBS213GE-BC (2.1M / Monochrome / RJ45 connector / External DC power / C mount)
STC-BBS213POE-BL (2.1M / Monochrome / RJ45 connector / PoE power / S mount)
STC-BBS213GE-BL (2.1M / Monochrome / RJ45 connector / External DC power / S mount)
STC-BCS213POE-BC (2.1M / Color / RJ45 connector / PoE power / C mount)
STC-BCS213GE-BC (2.1M / Color / RJ45 connector / External DC power / C mount)
STC-BCS213POE-BL (2.1M / Color / RJ45 connector / PoE power / S mount)
STC-BCS213GE-BL (2.1M / Color / RJ45 connector / External DC power / S mount)
STC-BCS213POE-BC-NIR (2.1M / Color-NIR / RJ45 connector / PoE power / C mount)
STC-BCS213GE-BC-NIR (2.1M / Color-NIR / RJ45 connector / External DC power / C mount)
STC-BCS213POE-BL-NIR (2.1M / Color-NIR / RJ45 connector / PoE power / S mount)
STC-BCS213GE-BL-NIR (2.1M / Color-NIR / RJ45 connector / External DC power / S mount)
No.21S064-00
1/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
GigE Vision
Monochrome / Color CMOS Board Camera
STC-BBS213POE-BC (2.1M / Monochrome / RJ45 connector / PoE power / C mount)
STC-BBS213GE-BC (2.1M / Monochrome / RJ45 connector / External DC power / C mount)
STC-BBS213POE-BL (2.1M / Monochrome / RJ45 connector / PoE power / S mount)
STC-BBS213GE-BL (2.1M / Monochrome / RJ45 connector / External DC power / S mount)
STC-BCS213POE-BC (2.1M / Color / RJ45 connector / PoE power / C mount)
STC-BCS213GE-BC (2.1M / Color / RJ45 connector / External DC power / C mount)
STC-BCS213POE-BL (2.1M / Color / RJ45 connector / PoE power / S mount)
STC-BCS213GE-BL (2.1M / Color / RJ45 connector / External DC power / S mount)
STC-BCS213POE-BC-NIR (2.1M / Color-NIR / RJ45 connector / PoE power / C mount)
STC-BCS213GE-BC-NIR (2.1M / Color-NIR / RJ45 connector / External DC power / C mount)
STC-BCS213POE-BL-NIR (2.1M / Color-NIR / RJ45 connector / PoE power / S mount)
STC-BCS213GE-BL-NIR (2.1M / Color-NIR / RJ45 connector / External DC power / S mount)
Product Specifications and User’s Guide
No.21S064-00
2/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
Table of Contents
1 PRODUCT PRECAUTIONS ................................................................................... 8
2 WARRANTY .......................................................................................................... 8
3 SOFTWARE LICENSING....................................................................................... 9
3.1 LWIP TCP/IP Licensing ............................................................................................................ 9
4 OVERVIEW .......................................................................................................... 10
4.1 Features .................................................................................................................................. 10
4.2 Product Number Naming Method ......................................................................................... 10
5 SPECIFICATIONS ................................................................................................ 11
5.1 Electronic Specifications ....................................................................................................... 11
STC-BBS213POE-Bx / STC-BBS213GE-Bx / STC-BCS213POE-Bx / STC-BCS213GE-Bx ............ 11
STC-BCS213POE-Bx-NIR / STC-BCS213GE-Bx-NIR ..................................................................... 13
5.2 Spectral Sensitivity Characteristics ..................................................................................... 15
STC-BBS213POE-BC / STC-BBS213GE-BC / STC-BBS213POE-BL / STC-BBS213GE-BL ......... 15
STC-BCS213POE-BC / STC-BCS213GE-BC / STC-BCS213POE-BL / STC-BCS213GE-BL
(without IR Cut Filter) .................................................................................................................................. 15
STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR / STC-BCS213POE-BL-NIR / STC-
BCS213GE-BL-NIR (without Dual Pass Filter) ........................................................................................... 16
IR Cut Filter (STC-BCS213POE-BC / STC-BCS213GE-BC / STC-BCS213POE-BL / STC-
BCS213GE-BL) ............................................................................................................................................. 17
Dual Pass Filter (STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR / STC-BCS213POE-BL-
NIR / STC-BCS213GE-BL-NIR) .................................................................................................................. 17
5.3 Mechanical Specifications ..................................................................................................... 18
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-
NIR ......................................................................................................................................................... 18
STC-BxS213POE-BL / STC-BxS213GE-BL / STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-
NIR ......................................................................................................................................................... 18
5.4 Environmental Specifications ............................................................................................... 19
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-
NIR ......................................................................................................................................................... 19
STC-BxS213POE-BL / STC-BxS213GE-BL / STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-
NIR ......................................................................................................................................................... 19
No.21S064-00
3/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
6 CONNECTOR SPECIFICATIONS ........................................................................ 20
6.1 RJ45 Connector ...................................................................................................................... 20
6.2 Power/IO Connector ............................................................................................................... 21
Opto-isolated input / output for STC-BxS213POE-Bx / STC-BCS213POE-Bx-NIR...................... 24
Non-isolated input / output for STC-BxS213GE-Bx / STC-BCS213GE-Bx-NIR ............................ 25
Input and Output Signal Timing (Hardware Trigger) ..................................................................... 26
Input and Output Signal Timing (Software Trigger) ...................................................................... 27
External Hardware Trigger Input Delay.......................................................................................... 28
6.2.5.1 External Trigger Signal Delay (Positive polarity trigger signal)................................................ 28
6.2.5.2 External Trigger Signal Delay (Negative polarity trigger signal) .............................................. 28
6.2.5.3 Measured External Trigger Signal Delay through Opt-Isolated Port (Line 0) ........................... 29
7 DIMENSIONS ...................................................................................................... 31
7.1 STC-BBS213POE-BC / STC-BCS213POE-BC / STC-BBS213GE-BC / STC-BCS213GE-BC /
STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR ................................................................... 31
7.2 STC-BBS213POE-BL / STC-BCS213POE-BL / STC-BBS213GE-BL / STC-BCS213GE-BL /
STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-NIR .................................................................... 32
8 SENSOR INFORMATION .................................................................................... 33
8.1 Pixel Transferring Image ........................................................................................................ 33
9 CAMERA OPERATIONAL MODES ..................................................................... 34
9.1 Normal Mode ........................................................................................................................... 34
9.2 Pulse width trigger mode....................................................................................................... 35
Timing .............................................................................................................................................. 35
Exposure Timing with Positive Polarity Trigger Signal ................................................................ 36
Exposure Timing with Negative Polarity Trigger Signal ............................................................... 37
9.3 Edge Preset Trigger Mode ..................................................................................................... 38
Timing .............................................................................................................................................. 38
Exposure Timing with Positive Polarity Trigger Signal ................................................................ 39
Exposure Timing with the Negative Polarity Trigger signal ......................................................... 40
9.4 Edge Preset Trigger Mode (Trigger input while image is out) ............................................ 41
Timing .............................................................................................................................................. 41
10 CAMERA FUNCTIONS ........................................................................................ 42
No.21S064-00
4/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
10.1 Save and load the camera settings .................................................................................... 42
Saving Camera Settings .............................................................................................................. 42
Loading Camera Settings ............................................................................................................ 43
Loading Camera Settings when Camera Power is on ............................................................... 43
Camera Settings Initialization ..................................................................................................... 43
10.2 Frame rate ............................................................................................................................ 44
10.3 Gain ...................................................................................................................................... 44
Analog Gain ................................................................................................................................. 44
Digital Gain ................................................................................................................................... 44
10.4 Exposure Time ..................................................................................................................... 45
10.5 Black Level ........................................................................................................................... 45
10.6 ALC (Auto Light Control) .................................................................................................... 46
ALC control method .................................................................................................................... 47
AGC (Auto Gain Contorl) ............................................................................................................. 48
Auto shutter ................................................................................................................................. 49
ALC settings procedure .............................................................................................................. 49
10.7 White balance (Only available for color camera) .............................................................. 50
White balance control methods .................................................................................................. 50
White balance control method selection .................................................................................... 50
White balance calculate region setting ...................................................................................... 52
10.8 Gamma correction ............................................................................................................... 53
10.9 ROI (Region of Interest) ...................................................................................................... 53
10.10 Pixel Format ...................................................................................................................... 54
10.11 Trigger .................................................................................................................................. 55
Trigger signal processing procedure ......................................................................................... 55
10.12 Image Flip .......................................................................................................................... 56
10.13 LUT Control ....................................................................................................................... 56
10.14 Defective pixel correction ................................................................................................ 57
10.15 Counter And Timer Control ............................................................................................. 58
10.16 Event Control .................................................................................................................... 59
10.17 Chunk Control .................................................................................................................. 60
10.18 Action Control .................................................................................................................. 60
No.21S064-00
5/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
10.19 IEEE1588 ........................................................................................................................... 61
11 GENICAM COMMAND ........................................................................................ 63
11.1 DeviceControl ...................................................................................................................... 63
11.2 ImageFormatControl ........................................................................................................... 65
11.3 AcquisitionControl .............................................................................................................. 66
11.4 AnalogControl ..................................................................................................................... 67
11.5 LUTControl ........................................................................................................................... 68
11.6 DigitalIOControl ................................................................................................................... 68
11.7 LogicBlockControl .............................................................................................................. 69
11.8 SoftwareSignalControl ........................................................................................................ 69
11.9 CounterAndTimerControl ................................................................................................... 69
11.10 EventControl ........................................................................................................................ 70
11.11 UserSetControl .................................................................................................................... 70
11.12 ChunkDataControl ............................................................................................................... 71
11.13 ActionControl ...................................................................................................................... 71
11.14 FileAccessControl ............................................................................................................... 72
11.15 TestControl .......................................................................................................................... 72
11.16 TransportLayerControl ....................................................................................................... 73
12 REVISION HISTORY ........................................................................................... 75
No.21S064-00
6/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
Precautions for safe use
Please read carefully this “Precautions for safe use” before use the camera. Then the camera uses correctly with
agreeing with below notes.
In this “Precautions for safe use”, notes divides into “Warning” and “Caution” to use the camera safety and prevent to
harm and damage.
Warning
This shows, assumption for possibility of serious accident leading death or
serious injury if ignore this note and camera uses incorrectly.
Caution
This shows, assumption for possibility of bear the damage or physical
damage if ignore this note and camera uses incorrectly.
About Graphic
symbols
[Environment / condition]
Warning
Do not use flammable or explosiveness
atmospheres.
This will cause of personal injury or fire.
Do not use for “safety for human body” related
usage.
This camera is designed for use “do not harm
human body immediately” if by any chance the
camera has malfunction.
Caution
Use and store under specified environmental
conditions (Vibration, shock, temperature,
humidity) in the specifications for this camera.
This will cause of fire or damage the camera.
[Installation and cable wiring]
Warning
Do not use with out of power voltage range
that is specified in the specifications for this
camera.
This will cause of fire, electrification or
malfunction.
Do not wrong wiring.
This will cause of fire or malfunction.
No.21S064-00
7/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
Caution
When using PoE power models, there is a risk of
short circuit between camera signal GND (6pin
on power/IO connector) ciurcuit and frame
ground through other devices.
This will cause of malfunction with some PoE
power supplier.
It is necessary to wiring and mounting that is
specified in the specifications for this camera.
This will cause of fire or malfunction.
It is necessary to wiring with turn off the camera.
This will cause of electrification or malfunction.
It is necessary to mounting the camera without
stress for the cable.
This will case of electrification or fire.
[Usage instruction]
Warning
Do not touch the terminal and PCB board
While turn on the camera.
This will cause of electrification or accident
caused by malfunction.
Do not put combustibles near the camera.
This will cause of fire.
Do not use without usage that is specified in
the specifications for this camera.
This will cause of personal injury or malfunction.
Do not push metals including screw driver into
radiation holes.
This will cause of electrification or malfunction.
Do not touch the camera housing while or
afterusing the camera.
There is a risk of get burned.
Caution
Do not push contamination into opening of
the camera.
This will cause of electrification or malfunction.
Do not block the radiation holes.
This will cause of fire due to increase the
camera inside temperature.
[Maintenance]
Caution
Do not disassemble or repair the camera.
This will cause of fire, electrification or
malfunction.
It is turn off the camera when maintaining or
inspecting the camera.
This will cause of electrification.
[Disposal]
Caution
It is necessary to dispose of accordance with
WEEE directive.
No.21S064-00
8/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
1 Product Precautions
➢ Do not give shock to the camera.
➢ Do not haul or damage the camera cable.
➢ Do not wrap the camera with any material while using the camera. This will cause the internal camera
temperature to increase.
➢ When the camera moving or using the place that temperature difference is extreme, countermeasure for dew
condensation (heat removal / cold removal) is necessary.
➢ While the camera is not using, keep the lens cap on the camera to prevent dust or contamination from getting
in the sensor or filter and scratching or damaging it.
Do not keep the camera under the following conditions.
・ In wet, moist, high humidity or dusty place
・ Under direct sunlight
・ In extreme high or low temperature place
・ Near an object that releases a strong magnetic or electric filed
・ Place with strong vibrations
➢ Apply the power that satisfies the specified in specifications for the camera.
➢ The defective pixels may appear due to the sensor characteristics.
➢ Use below recommend materials (or equivalent materials) to clean the surface of glass.
・ Air dust: Non Freon air duster (NAKABAYASHI Co., LTD.)
・ Alcohol: Propan-2-ol (SAN’EI KAKO Co., LTD.)
・ Non-woven: nikowipe clean room (NKB)
2 Warranty
■Warranty period
One year after delivery (However, the camera had malfunction with camera uses correctly)
In below case for a fee even within warranty period.
・The malfunction caused by incorrect usage, incorrect modify or repair.
・The malfunction caused by external shock including the camera dropping after delivery the camera.
・The malfunction caused by fire, earthquake, flood disaster, thunderbolt struck, other natural disaster or
wrong voltage.
■Warranty coverage
Exchange or repair the malfunction camera if the malfunction is occurred by our responsibility.
“Warranty” mean is warranty for the delivered camera itself. Please accept the induction damage by the
camera malfunction is not included.
No.21S064-00
9/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
3 Software Licensing
3.1 LWIP TCP/IP Licensing
The software in this camera includes LWIP TCP/IP implementation.
The copyright information is
Copyright (c) 2001-2004 Swedish Institute of Computer Science.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
No.21S064-00
10/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
4 Overview
This document describes the specification of the following cameras:
STC-BBS213POE-BC (2.1M monochrome, PoE power, RJ45 connector C mount board camera)
STC-BBS213GE-BC (2.1M monochrome, external DC power, RJ45 connector C mount board camera)
STC-BBS213POE-BL (2.1M monochrome, PoE power, RJ45 connector S mount board camera)
STC-BBS213GE-BL (2.1M monochrome, external DC power, RJ45 connector S mount board camera)
STC-BCS213POE-BC (2.1M color, PoE power, RJ45 connector C mount board camera)
STC-BCS213GE-BC (2.1M color, external DC power, RJ45 connector C mount board camera)
STC-BCS213POE-BL (2.1M color, PoE power, RJ45 connector S mount board camera)
STC-BCS213GE-BL (2.1M color, external DC power, RJ45 connector S mount board camera)
STC-BCS213POE-BC-NIR (2.1M color NIR, PoE power, RJ45 connector C mount board camera)
STC-BCS213GE-BC-NIR (2.1M color NIR, external DC power, RJ45 connector C mount board camera)
STC-BCS213POE-BL-NIR (2.1M color NIR, PoE power, RJ45 connector S mount board camera)
STC-BCS213GE-BL-NIR (2.1M color NIR, external DC power, RJ45 connector S mount board camera)
4.1 Features
⚫ GigE Interface
⚫ PoE (Power over Ethernet) models and external DC power models are lineup.
⚫ Small form factor camera board type cameras
⚫ Near IR color models are available
⚫ Maximum frame rate (Full resolution): 54.6 fps @ 2.1M 8bits
⚫ CMOS (Global Shutter)
⚫ Up to 2,048 Defective Pixel Correction (Default: ON)
⚫ 8bits, 10bits, 12bits output
4.2 Product Number Naming Method
STC-BxS213POE-BC-NIR
Interface
POE: GigE PoE, RJ45
GE: GigE non-PoE, RJ45
Lens mount
C: C mount
L: S mount
B: Board type
B: Monochrome
C: Color
Sensor manufacture
S: SONY
213: 1/2.8”, 2.1M sensor
NIR: Near IR
(none): Visible light
No.21S064-00
11/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
5 Specifications
5.1 Electronic Specifications
STC-BBS213POE-Bx / STC-BBS213GE-Bx / STC-BCS213POE-Bx / STC-BCS213GE-Bx
Product
STC-BBS213POE-BC / STC-BBS213GE-BC /
STC-BBS213POE-BL / STC-BBS213GE-BL
STC-BCS213POE-BC / STC-BCS213GE-BC /
STC-BCS213POE-BL / STC-BCS213GE-BL
Image Sensor
1/2.8” 2.1M Progressive Monochrome CMOS
(SONY: IMX290)
1/2.8” 2.1M Progressive Color CMOS
(SONY: IMX291)
Shutter Type
Rolling Shutter / Global Reset Shutter
Active Picture Elements
1,920 (H) x 1,080 (V)
Cell Size
2.9 (H) x 2.9 (V) μm
Scanning Mode
Full scanning (Full resolution) / ROI
Frame rate (at full scanning)
8bits: 53.0 fps / 10bits: 26.5 fps / 10bits Packed: 35.4 fps /
12bits: 26.5 fps / 12bits Packed: 35.4 fps / RGB8: 17.7 fps
Maximum frame rate: 208.7 fps @ “less than 1,736 (H)” x 304 (V) (8bits)
ADC bit depth
10bits / 12bits
Image Output Format
Mono8 / Mono10 / Mono10Packed /
Mono12 / Mono12Packed
Mono8 / Mono10 / Mono10Packed /
Mono12 / Mono12Packed /
BayerRG8 / BayerRG10 / BayerRG10Packed /
BayerRG12 / BayerRG12Packed / RGB8
Noise
Level
8bits output
Less than 2.8 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 11 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 44 digits (Gain 0 dB)
Sensitivity (*1)
510 Lux
1,100 Lux
Exposure
Time
8bits output
Rolling Shutter: 126 µseconds to 999 mseconds (Default: 18,713 µseconds)
Global Reset Shutter: 211 µseconds to 3.67 seconds (Default: 18,713 µseconds)
10bits / 10bits Packed output
12bits / 12bits Packed output
Rolling Shutter: 129 µseconds to 999 mseconds (Default: 18,711 µseconds)
Global Reset Shutter: 217 µseconds to 3.78 seconds (Default: 18,711 µseconds)
RGB8 output
N/A
Rolling Shutter:
252 µseconds to 999 mseconds
(Default: 18,712 µseconds)
Global Reset Shutter:
421 µseconds to 3.67 seconds
(Default: 18,712 µseconds)
Gain
Analog Gain
0 to 25.2 dB (Default: 0 dB)
Digital Gain
x1 to x3 (Default: x1)
ROI
Horizontal: 368 to 1,920 pixels, Vertical: 304 to 1,080 lines (Default: 1,920 x 1,080)
Adjustable steps for size: 8 pixels in horizontal direction and 2 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction and 2 lines in vertical direction
Gamma
Gamma 0.1 to 4.0 (Default: 1.0)
Binning
N/A
Decimation
N/A
Image Flip
Horizontal / Vertical / Horizontal and Vertical / Off
Defective Pixel Correction
Up to 2,048 points (Default: On)
Default: Bold
No.21S064-00
12/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
Product
STC-BBS213POE-BC / STC-BCS213POE-BC /
STC-BBS213POE-BL / STC-BCS213POE-BL
STC-BBS213GE-BC / STC-BCS213GE-BC /
STC-BBS213GE-BL / STC-BCS213GE-BL
Auto
Image
Control
Auto Exposure
Support (Default: OFF)
Auto Gain
Support (Default: OFF)
Auto White Balance
N/A
Auto / Manual / Push to Set
Operational Mode
Edge preset trigger / Pulse width trigger / Free run
Protocol
GigE Vision 2.1 and GenICam SFNC 2.4, IEEE1588 (PTP)
Interface
IEEE802.3af CLASS2 (1000BASE-T)
IEEE802.3ab (1000BASE-T)
I/O
One opto-isolated input,
three opto-isolated outputs
One non-isolated input,
three non-isolated / open collector outputs
Power
Input Voltage
Power Over Ethernet (IEEE802.3af)
+10.8 to +26.4 Vdc External power
Consumption
PoE: 4.1 W
+12 V / +24 V: 3.3 W
Default: Bold
Precautions
(*1) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
Camera Setting
Environment
Parameter
Setting
Parameter
Setting
Gain Up
0 dB
Light Source
Light Box (White)
AGC
Off
Color temperature
5,100K
White Balance
Optimum
Lens
Electrical Shutter
1/30 seconds
F on Lens
F5.6
Black Level
Optimum
Target Luminance
IM-600 (Topcon)
Gamma
Factory Setting
No.21S064-00
13/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
STC-BCS213POE-Bx-NIR / STC-BCS213GE-Bx-NIR
Product
STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR /
STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-NIR
Image Sensor
1/2.8” 2.1M Progressive Color CMOS
(SONY: IMX462)
Shutter Type
Rolling Shutter / Global Reset Shutter
Active Picture Elements
1,920 (H) x 1,080 (V)
Cell Size
2.9 (H) x 2.9 (V) μm
Scanning Mode
Full scanning (Full resolution) / ROI
Frame rate (at full scanning)
8bits: 53.0 fps / 10bits: 26.5 fps / 10bits Packed: 35.4 fps /
12bits: 26.5 fps / 12bits Packed: 35.4 fps / RGB8: 17.7 fps
Maximum frame rate: 208.7 fps @ “less than 1,736 (H)” x 304 (V) (8bits)
ADC bit depth
10bits / 12bits
Image Output Format
Mono8 / Mono10 / Mono10Packed / Mono12 / Mono12Packed /
BayerRG8 / BayerRG10 / BayerRG10Packed / BayerRG12 / BayerRG12Packed / RGB8
Noise
Level
8bits output
Less than 3 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 12 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 48 digits (Gain 0 dB)
Sensitivity (*1)
850 Lux
Exposure
Time
8bits output
Rolling Shutter: 126 µseconds to 999 mseconds (Default: 18,713 µseconds)
Global Reset Shutter: 211 µseconds to 3.67 seconds (Default: 18,713 µseconds)
10bits / 10bits Packed output
12bits / 12bits Packed output
Rolling Shutter: 129 µseconds to 999 mseconds (Default: 18,711 µseconds)
Global Reset Shutter: 217 µseconds to 3.78 seconds (Default: 18,711 µseconds)
RGB8 output
Rolling Shutter: 252 µseconds to 999 mseconds (Default: 18,712 µseconds)
Global Reset Shutter: 421 µseconds to 3.67 seconds (Default: 18,712 µseconds)
Gain
Analog Gain
0 to 25.2 dB (Default: 0 dB)
Digital Gain
x1 to x3 (Default: x1)
ROI
Horizontal: 368 to 1,920 pixels, Vertical: 304 to 1,080 lines (Default: 1,920 x 1,080)
Adjustable steps for size: 8 pixels in horizontal direction and 2 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction and 2 lines in vertical direction
Gamma
Gamma 0.1 to 4.0 (Default: 1.0)
Binning
N/A
Decimation
N/A
Image Flip
Horizontal / Vertical / Horizontal and Vertical / Off
Defective Pixel Correction
Up to 2,048 points (Default: On)
Auto
Image
Control
Auto Exposure
Support (Default: OFF)
Auto Gain
Support (Default: OFF)
Auto White Balance
Auto / Manual / Push to Set
Operational Mode
Edge preset trigger / Pulse width trigger / Free run
Protocol
GigE Vision 2.1 and GenICam SFNC 2.4, IEEE1588 (PTP)
Default: Bold
No.21S064-00
14/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
Product
STC-BCS213POE-BC-NIR /
STC-BCS213POE-BL-NIR
STC-BCS213GE-BC-NIR /
STC-BCS213GE-BL-NIR
Interface
IEEE802.3af CLASS2 (1000BASE-T)
IEEE802.3ab (1000BASE-T)
I/O
One opto-isolated input,
three opto-isolated outputs
One non-isolated input,
three non-isolated / open collector outputs
Power
Input Voltage
Power Over Ethernet (IEEE802.3af)
+10.8 to +26.4 Vdc External power
Consumption
PoE: 4.1 W
+12 V / +24 V: 3.3 W
Precautions
(*1) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
Camera Setting
Environment
Parameter
Setting
Parameter
Setting
Gain Up
0 dB
Light Source
Light Box (White)
AGC
Off
Color temperature
5,100K
White Balance
Optimum
Lens
Electrical Shutter
1/30 seconds
F on Lens
F5.6
Black Level
Optimum
Target Luminance
IM-600 (Topcon)
Gamma
Factory Setting
No.21S064-00
15/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
5.2 Spectral Sensitivity Characteristics
STC-BBS213POE-BC / STC-BBS213GE-BC / STC-BBS213POE-BL / STC-BBS213GE-BL
STC-BCS213POE-BC / STC-BCS213GE-BC / STC-BCS213POE-BL / STC-BCS213GE-BL
(without IR Cut Filter)
No.21S064-00
16/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR / STC-BCS213POE-BL-NIR /
STC-BCS213GE-BL-NIR
(without Dual Pass Filter)
No.21S064-00
17/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
IR Cut Filter (STC-BCS213POE-BC / STC-BCS213GE-BC / STC-BCS213POE-BL / STC-BCS213GE-BL)
Dual Pass Filter
(STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR / STC-BCS213POE-BL-NIR /
STC-BCS213GE-BL-NIR)
0
10
20
30
40
50
60
70
80
90
100
350 450 550 650 750 850 950 1050 1150
Transmittance (%)
No.21S064-00
18/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
5.3 Mechanical Specifications
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR
Model Number
STC-BBS213POE-BC /
STC-BBS213GE-BC
STC-BCS213POE-BC /
STC-BCS213GE-BC
STC-BCS213POE-BC-NIR /
STC-BCS213GE-BC-NIR
Dimensions
38 (W) x 38 (H) x 39.8 (D) mm (*1)
38 (W) x 38 (H) x 40.1 (D) mm (*1)
38 (W) x 38 (H) x 40 (D) mm (*1)
Optical Filter
No Optical Filter
IR Cut Filter
Dual Pass Filter
Optical Center Accuracy
Positional accuracy in Horizontal and Vertical directions: +/- 0.35 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Material
Aluminum Alloy
Lens Mount
C mount
Interface Connectors
Ethernet connector: RJ45 connector
Power/IO connector: SM06B-SRSS (JST) (*2)
Camera Mounting
Twelve M3 screw holes (Four on front, two on top, bottom and both side plates)
Eight M2 screw holes (Two on top, bottom and both side plates)
Weight
Approximately 47 g
(*1) Excluding the connectors
(*2) PoE power models could not use external DC power through Power/IO connector.
Please check connector pin assignment for Power/IO connector of PoE power models.
STC-BxS213POE-BL / STC-BxS213GE-BL / STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-NIR
Model Number
STC-BBS213POE-BL /
STC-BBS213GE-BL
STC-BCS213POE-BL /
STC-BCS213GE-BL
STC-BCS213POE-BL-NIR /
STC-BCS213GE-BL-NIR
Dimensions
38 (W) x 38 (H) x 34.4 (D) mm (*1)
38 (W) x 38 (H) x 34.7 (D) mm (*1)
38 (W) x 38 (H) x 34.6 (D) mm (*1)
Optical Filter
No Optical Filter
IR Cut Filter
Dual Pass Filter
Optical Center Accuracy
Positional accuracy in Horizontal and Vertical directions: +/- 0.35 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Material
Aluminum Alloy
Lens Mount
M12 x P0.5 mount / S mount
Interface Connectors
Ethernet connector: RJ45 connector
Power/IO connector: SM06B-SRSS (JST) (*2)
Camera Mounting
Twelve M3 screw holes (Four on front, two on top, bottom and both side plates)
Eight M2 screw holes (Two on top, bottom and both side plates)
Weight
Approximately 46 g
(*1) Excluding the connectors
(*2) PoE power models could not use external DC power through Power/IO connector.
Please check connector pin assignment for Power/IO connector of PoE power models.
No.21S064-00
19/76
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BxS213POE-BL / STC-BxS213GE-BL
Product Specifications and User’s Guide
5.4 Environmental Specifications
STC-BxS213POE-BC / STC-BxS213GE-BC / STC-BCS213POE-BC-NIR / STC-BCS213GE-BC-NIR
Model Number
STC-BBS213POE-BC /
STC-BBS213GE-BC
STC-BCS213POE-BC /
STC-BCS213GE-BC
STC-BCS213POE-BC-NIR /
STC-BCS213GE-BC-NIR
Operational
Temperature /
Humidity
Minimum
Environmental Temperature: 0 deg. C (No condensation)
Maximum
Temperature (temperature sensor on camera) shall not exceed +67 deg. C (*1)
Environmental Humidity: 20 to 85 %RH (No condensation)
Storage Temperature / Humidity
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 20 to 85 %RH (No condensation)
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Shock
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
RoHS
RoHS Compliance
STC-BxS213POE-BL / STC-BxS213GE-BL / STC-BCS213POE-BL-NIR / STC-BCS213GE-BL-NIR
Model Number
STC-BBS213POE-BL /
STC-BBS213GE-BL
STC-BCS213POE-BL /
STC-BCS213GE-BL
STC-BCS213POE-BL-NIR /
STC-BCS213GE-BL-NIR
Operational
Temperature /
Humidity
Minimum
Environmental Temperature: 0 deg. C (No condensation)
Maximum
Temperature (temperature sensor on camera) shall not exceed +68 deg. C (*1)
Environmental Humidity: 20 to 85 %RH (No condensation)
Storage Temperature / Humidity
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 20 to 85 %RH (No condensation)
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Shock
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
RoHS
RoHS Compliance
(*1) When using this camera, please ensures the camera is installed in system with appropriate heat dissipation (at camera
using condition) to not exceed operational temperature (temperature of sensor on camera) in this specifications document.
Even evaluating this camera, please ensures camera with appropriate heat dissipation to not exceed operational
temperature (temperature of sensor on camera) in this specifications document.
The temperature (temperature of sensor on camera) is exceeding it in this specifications document while evaluating this
camera, evaluating result of performance and/or characteristics of camera could be different from information on this
specifications document.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77

Omron B Series GigE Vision Monochrome Color CMOS Board Camera BxS213xx Owner's manual

Omron
Brand
Omron
Model
B Series GigE Vision Monochrome Color CMOS Board Camera BxS213xx
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents