REMOTE LCD ANNUNCIATOR RAM-3318-LCD
5691
CATALOG NUMBER
Rev 0
Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: (905) 660-4655
Fax: (905) 660-4113
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: (888) 660-4655
Fax Toll Free: (888) 660-4113
THIS INFORMATION IS FOR MARKETING PURPOSES
ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS
TECHNICALLY.
For complete and accurate technical information relating
to performance, installation, testing and certication, refer
to technical literature. This document contains intellectual
property of Mircom. The information is subject to change by
Mircom without notice. Mircom does not represent or warrant
correctness or completeness.
Description
The RAM-3318-LCD Remote Annunciator is used as
a component of an FX-3318 Fire Alarm System. It
provides an exact mimic of the FX-3318 display at a
remote location.
The display is four lines, 20 characters back-lit
alphanumeric LCD. It displays information regarding
the panel, its circuits, and devices. An on-screen cursor
is controlled by the cursor buttons for menu selection
and control.
Model: RAM-3318-LCD
Features
• 4 line, 20 character back-lit alphanumeric LCD
display.
• Common feature LEDs and push buttons.
• Alphanumeric keypad for the LCD.
• Each RAM-3318-LCD has its own address.
Addresses available are 1 to 7 inclusive.
• Cursor buttons for menu selection and control.
• Mounted using one of the BB-1000 or series
semi-ush enclosures.
Model Description
RAM-3318-LCD Remote LCD Annunciator
Ordering Information
Electrical Ratings
Power Limited Nominal Voltage:
24 VDC
Current Consumption:
Standby: 70 mA
Alarm: 100 mA
All LEDs illuminated:
40 mA Max.