Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK70 Page-1-3
Part Number:
RLIK70
Part Number: RLIK70
Missing Parts –Contact TrailFX at
1(866) 638-4870 or support@trailfx.com
Any required parts will be shipped to you
directly –DO NOT return whole kit to
store!
Install Time:
60 minutes
APPLICATION: For use with various Ram HD vehicles
Parts List:
Description Qty
Bedliner Tub - (Various part #) 1
Tailgate Cover –#RD06TGNR 1
Bolts 8
2” Spacers 4
1” Spacers 4
Tools Required
Torx Screwdriver (T20)
Utility Knife
Care and Maintenance: To protect the finish of this product, clean with soap and water, do not use abrasive
substances.
WARNING: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION.
Bolts
2” Spacers
1” Spacers
Assembly, Installation, Operation and
Maintenance Instructions
Bedliner & Tailgate Cover Kit
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK70 Page-2-3
INSTALLATION PROCEDURE:
PLEASE READ INSTRUCTIONS CAREFULLY
BEFORE STARTING THE INSTALLATION. One
person can perform the installation, but we
recommend two people.
Vehicle Preparation: Thoroughly wash and dry
the tailgate and surrounding areas.
TAILGATE INSTRUCTIONS:
1. Locate the screws on the tailgate that match
with the pre-drilled holes on the plastic tailgate
cover. Using a screwdriver, remove the
screws. DO NOT DISCARD OEM SCREWS.
2. Install the tailgate cover by centering the pre-
drilled holes then re-installing screws saved
from step 1.
Visit www.trailfx.com or call 1 (866) 638-4870 for Warranty Information / Tech Support / Product Updates.
Keystone Automotive Operations Inc. All Rights Reserved. 09/30/2022-R01 RLIK70 Page-3-3
INSTALLATION PROCEDURE CONTINUED:
BEDLINER INSTRUCTIONS:
1. Locate and remove (4) cleats. DON NOT
DISCARD CLEATS
2. Install the bedliner onto the truck cargo box. (A)
drop bedliner straight down, making sure the front
rail is in the correct position. (B) Push the side
walls firmly to insert the top edges under the side
of the truck bed.
3. Re-install (4) cleats removed from step 1 using
replacement bolts and spacers:
Front Cleats, use short 1” Spacers
Rear Cleats, use longer 2” Spacers
-
1
-
2
-
3
TrailFX D8U19HDX Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TrailFX F65U15X Installation guide
-
-
-
-
-
-
-
-
-